ReviewsArbor Boring Tool

LINE10 Tools 6-inch Wire Brush Wheel for Bench Grinder, Set of 2, Brass-Coated Steel for Cleaning Rust

  • Kit comes with two 6 inch diameter wire brush wheels which can be mounted on any 6 inch bench grinder with 5/8 or 1/2 inch arbor.
  • 1/2-inch bushing is included for 1/2-inch arbor grinders, 5/8-inch arbor fits on most 6 inch bench grinders.
  • Ideal for Rust removal, Paint Stripping, Deburring sharp edges, Edge Blending.
  • Quality Long lasting Brass-coated hardened steel bristle wire reduces sparking and wire breakage.
  • Ideal stationary solution for any shop, check the power tool safety instructions before use 3750 RPM Max.
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

HGC BT30 Tightening Fixture CNC Tool Holder Tapers For BT30 Machine Tool Handle

  • For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
  • Heavy Duty Boring Bar Holder to holds 3/4" tool with bushing, 1" diameter without bushing.
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter.
  • Precision ground and hardened. Completely sealed for maintenance free operation.
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

5 1/2 Width Leather Honing Wheel - Fits 1/2 Arbor - Buffing Compound Included

  • 5” (1/2" Width) All Leather Wheel for Stropping Honing Nearly Every Tool in Your Shop..
  • 1/2" Arbor Hole Fits All Bench Grinders with 1/2" Arbor..
  • Premium White Diamond Buffing compound and instructions included.
  • High Quality Leather | Turn minutes of hand stropping into seconds & add that professionally polished, razor sharp mirror finish edge..
  • Handcrafted in the USA | We Stand Behind Every Product We Sell With a 100% Satisfaction Guarantee..
Check Stock

Carbide Boring Bar, Boring Bar Holders Small Bore Inner Hole Turning Tool Tungsten Steel Carbide Boring Bar Φ12mm SHB25‑12

  • ❤Stable: High accuracy, good clamping capability and stable retaining, can insure stable working of boring tool..
  • ❤Design: Practical accessories of lathe inner diameter tools and small diameter CNC special tool..
  • ❤Model SHB25‑12: Model SHB25‑12, means that the outer diameter is 25mm/0.98in, and the clamp boring tool diameter is 12mm/0.47in..
  • ❤Tungsten steel: Manufactured from premium tungsten steel material, has high hardness, not easy to damage and corrosion..
  • ❤Easy to operate: Fine workmanship, compact and lightweight lathes tools, easy to operate..
Check Stock

TJATSE 1/2\ Round Shank Boring Bar Set Premium Indexable Carbide Inserts with Boring Bars CNC Turning Lathe Tool Set for Metal Lathe - 4 Pieces/Set

  • 【Industrial Quality Boring Bar Set】: TJATSE Boring Bar Set are made of Chilled Steel bar holders combine with Tin-coated carbide inserts, sturdy and durable for long time use. Great for semi-finishing on the existing hole cutter, fit boring machine, lathe machine..
  • 【Round Shanks Bar Holder】: Designed with round shank holders which allow the operator to set positve or negative rake, chip breaker eliminates long stringer chips. Positive rake 90-degree lead. Supplied with wrench..
  • 【Indexable Inserts Included】: Come with TCMT21.51 inserts and it can be indexed, when it is dull use another sided, a new cutting edge may be presented by simply indexing the insert. It is versatile and economical..
  • 【Easy Organization And Storage】: Easy reference guide for insert number, screw and other accessories is printed on the tool shank, and The entire turning tool set is contained in a alumium carrying case that protects and organizes each tool and stacks and stores easily..
  • 【TJATSE BRAND WARRANTY】: TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for industry through both our products and professional service..
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

250 x 2.5 x 32 Industrial Cold Saw Blade DMo5 HSS (180 Teeth)

  • Our blades will cut and last the same or better than your current blades!.
  • 250mm diameter x 2.5mm thickness x 32mm arbor hole Cold Saw Blade.
  • This blade comes with a universal pinhole pattern to fit all machines with a 32mm arbor hole..
  • Made from the highest quality M2 DMo5 tool steel. Heat treated and hardened to 65 HRc, triple tempered, and press quenched to preserve flatness..
Check Stock

Carbide Boring Bar, SHB25-12 Φ12MM Small Hole Inner Hole Turning Tool, Holdingers Φ12MM SHB25‑12, Premium Tungsten Steel Material, Compact and Lightweight

  • High accuracy, good clamping capability and stable retaining, can insure stable working of boring tool..
  • Practical accessories of lathe inner diameter tools and small diameter CNC special tool..
  • Model SHB25‑12, means that the outer diameter is 25mm/0.98in, and the clamp boring tool diameter is 12mm/0.47in..
  • Manufactured from premium tungsten steel material, has high hardness, not easy to damage and corrosion..
  • Fine workmanship, compact and lightweight lathes tools, easy to operate..
Check Stock