ReviewsArbor For Abrasive Wheels

Walter ZIP+ Cutoff Wheel [Pack of 25] - Type 1 Alumina Zirconia Cutting Wheel

  • Sturdy Construction: this extra thin metal cutoff wheel has alumina zirconia grit construction. The abrasive wheel has an integrated rib design for a cooler and safer cutting.
  • High Performance: this abrasive grit wheel helps deliver straighter cuts in lesser time. Cut-off wheel with reduced burr and friction is suitable for both manual and machined cutting tasks.
  • Application Range: the ribbed cutting wheel works on steel, stainless-steel, cast iron, and sheet metals. This extra thin ZIP+ ribbed wheel lasts longer without twisting or bending.
  • More Safety: the reinforced ZIP+ wheel has been highly reinforced for operator’s safety. Rough cutting wheel with a sturdy build-up and long life needs fewer replacements.
  • Product Specifications: it measures 4-1/2 in. in diameter, is 1/6 in. thick, and features a 7/8 in. arbor round hole fastening. The package includes 25 ribbed cut-off wheels rated for maximum rotational speed of 13,300 rpm.
Check Stock

4.5 Inch Metal Cutting Blade Angle Grinder Diamond Blade for Rebar, Piping, Cast Iron, Ferrous Metals, Steel

  • For use with angle grinders and small high speed saws.
  • For cutting rebar, conduit pipe, copper pipe, other piping and steel angle.
  • Does not shrink like other abrasive wheels.
  • Measures: 4.5” x 7/8"-5/8" arbor Max RPM: 13,300.
  • Vacuum brazed diamond blade designed to cut ferrous metals along with concrete and other hard materials.
Check Stock

JOUNJIP 2 5/16' Cut Off Wheel Metal Cutting Discs -fits Most Mini Miter Cut Off Saw Chop Saw and Benchtop Saws with 3/8' Arbor -2 5/16 x 1/16' x 3/8' (6-Pack)

  • Make Smooth Precise Cuts -metal cutting wheel cuts through steel, bronze, brass, nuts, bolts, screws, ferous and non-ferous metals.
  • Double Re-enforced -abrasive wheels & discs with fiberglass resin provide long lasting stability and resistance to breaking.
  • Compatible -fits 3/8″ arbor mini miter saws, cut-off saws, benchtop saws and work as rotary tool accessories.
  • 6 replacement saw blades -2 5/16″ inch diameter x 1/16″ KERF thickness x 3/8″ inch arbor.
  • Always take the proper safety precautions, use the blade guard and wear safety equipment -sparks can be emitted when using this accessory.
Check Stock

Forney 72396 Reducing Bushing Adapters for 1-Inch Thick Bench Grinding Wheels

  • Reducing bushing adapter for 1-Inch thick wheels.
Check Stock

BRSCHNITT Diamond Cut Off Wheel,3 Inch x 3/8 Inch Arbor Vacuum Brazed Diamond Saw Blades for Metal Steel Tube Iron Rebar Cutting Wheel 75mm

  • ✔Size --1pc Diameter 3 inch (75mm) ,segment thickness 1.5mm ,Arbor 3/8 inch /10mm.
  • ✔Metal cutting disc works well to cut all kinds of metal, including bolts, iron, rebar, metal profiles, aluminium, different types of pipes and another sheet metals with over 100X longer life than bonded cut off wheels in metal cutting applications.
  • ✔Diamond cutoff wheel delivers 3,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels.
  • ✔No dust and less spark when cutting, healthy for operater and less pollution,Much safer than abrasive cut-off wheel, no risk of break of disc.
  • ✔Machine:Angle grinder with 10 mm socket.
Check Stock

Superior Steel 25036 10\ 200 Teeth 5/8\ Arbor 1500 RPM Circular Saw Blade for Cutting Stainless Steel

  • Designed specifically to cut stainless steel.
  • 200 tooth configuration enables fast efficient cuts.
  • High Speed Steel tooth material, offering increased durability.
  • Hardened blade body ensures the blade runs smoother for longer life.
  • Laser-Cut blade for smooth and accurate cuts.
  • Metal-cutting grade teeth withstand impact, reduce wear and deliver longer blade life.
  • Cuts the metal instead of grinding it like abrasive wheels, so the finished product is smoother and cooler to the touch.
  • Specification: Diameter: 10" | Teeth: 200 | Teeth Type: BW | Hook Angle: 10 Degree | Arbor: 5/8" | Plate Thickness: 0.078" | Kerf: 0.078" | Teeth Thickness: 0.078" | Max RPM: 1500.
  • For Cutting: Steel Studs & Rods | Steel Pipe.
Check Stock

Dura-Gold 6\ Abrasive Filament Nylon Bristle Cup Brush - Coarse Sanding Scuffing Brush, 5/8\ 11 Thread, 1/4\ Drill Arbor - Remove Rust, Corrosion, Paint - Surface Prepping for Truck Bed Liner Coatings

  • Dura-Gold premium quality long-lasting 6" coarse abrasive filament nylon bristle cup brush with a standard power tool size 5/8" - 11 thread arbor. The included a 1/4" drill adapter arbor allows the brush to be used with drills..
  • A durable abrading brush with coarse abrasive grit embedded into the nylon brush strands, so it quickly and easily removes rust, corrosion, and also sands, scuffs, and deburrs metal, wood, plastic, and ceramic surfaces..
  • The ideal abrasive cup brush to use for cleaning and prepping surfaces for sprayable truck bed liner coatings. It quickly scuffs and strips metal surfaces with the abrasive nylon strands without causing any sparks that metal brushes do. It also leaves the surface with a fine enough scuff scratch that a primer or truck bed liner coating can go directly over it..
  • This brush is designed to be effective and will last many times longer than a wire brush. Because, as the brushes nylon strands wear down, they expose fresh embedded abrasive grit that continues to provide consistent clean and fast scuffing and rust removal..
  • 100% Satisfaction Guarantee: Buy with confidence, if you're not satisfied with this item at any time within the first year of purchase, we'll provide a refund or replacement..
Check Stock

Oso Legacy

  • 7 Ply Canadian Hardrock Maple with a Premium Palisander Wood Top & Bottom Finish Ply.
  • Size: 61mm // Durometer: 78A, Deck: L: 28.75" | W: 8.25" | WB: 15.25".
  • WHEELS All Arbor Wheels are made from an environmentally friendly sucrose-based, bio-urethane formula that reduces Arbor's reliance on harmful synthetic materials, without sacrificing an ounce of performance. Size: 61mm (78a) Bogart Wheels.
  • Mini-cruiser wheels for all-around skating Intended for carving and quick commutes.
  • Momentum Core: Dampens bumpy rides. Venice Formula: Soft and grippy.
Check Stock

Cut Off Wheels 4-1/2 ,PRETEC 50+5 Pack Metal Cutting Wheel,Thin 4.5” Metal & Stainless Steel Fast Cutting Discs for Angle Grinder - 7/8 Arbor Hole

  • ...undum grain that provides high hardness, durability and abrasion resistance,extend die grinder cut off wheel the service life..
  • 【Sharp & Clean Cutting】Cutting discs 0.04 inch ultra thin design for fast burr free and stable cutting. Make fast, clean cuts in steel, stainless and other ferrous metals with these abrasive cut-off wheels. Promot the heat dissipation of the cutting blade during work, avoid metal thermal burns. Performance with minimal material loss, make the cutting project more precise and efficient..
  • 【Professional Cutting Wheel】PRETEC Cutting wheels obtained CE,ISO certification.Help you better cut stainless steel, aluminum alloy, cast iron, carbon steel and general-purpose metal..
  • 【 Multiple Ueses】Cut off wheels 4 1/2 inch are designed for cutting steel, iron, plastic,fiberglass,stainless steel including rebar, steel pipe, sheet metal, structural tubing..
Check Stock

Benchmark Abrasives 4-1/2 Stripping Discs with 7/8 Arbor for Angle Grinder Silicon Carbide Grain Stripping Wheels Used for Cleaning Removing Paint Rust Oxidation Welds Pack of 5 - Extra Coarse

  • Benchmark Abrasives 4-1/2" diameter stripping discs with a 7/8" arbor are color-coded to identify the grit quickly. These discs effectively clean, blend and finish stainless steel and other metals..
  • The strong and durable design of the grinder discs ensures stability and accuracy. Made of silicon carbide material for strength and wear resistance during heavy abrasive operations..
  • Designed to meet industrial standards, our paint stripping discs are recommended to be used with high-speed power tools such as an angle grinder..
  • Efficient stripping wheels are used in various industries like automotive, transportation, mining, shipbuilding, foundries, construction, welding, fabrication, petrochemical, etc..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

LUCKUT Grinding Wheels Grinding Discs 4-1/2'' x 1/4'' x 7/8'' Grinder Wheel Center Metal Aggressive Grinding for Angle Grinders-10 Pack

  • [SIZE& QUANTITY]: A pack of 10 pieces grinding wheels. Its measures 4-1/2 in. in diameter, 1/4 in. in thickness, and is designed with a 7/8 in. arbor for easy and secure installation..
  • [APPLICATIONS]: The grinding wheel is perfect for cleaning, Rust removal, grinding, dusting, deburring, polishing, stripping resin. Can be effectively used on metal for steel, stainless steel, aluminum,copper,etc..
  • [EXTREME DURABILITY AND VALUE]: LUCKUT metal grinding wheels are made of high performance aluminum oxide grain for long life and aggressive material removal built..
  • [PERFORMANCE]: The abrasive grinding wheel is made for use with ¼ in. mandrels. The LUCKUT wheel is suitable for aggressive grinding and blending. The angle grinding wheel can be safely used on power grinders. The wheel runs at a speed of 13,300 RPM..
  • [COMPATIBILITY]: This grinding wheel is specially designed to deliver superior performance on ferrous and non-ferrous metals. Ideal for high operating speeds and aggressive grinding action used by professional metal fabrication, auto shops, maintenance repair, construction..
Check Stock