ReviewsArbor For Electrical Plumbing Hole

4 Inch Hole Saw with Heavy Duty Arbor, 38mm Depth High Hole HSS Bi-Metal Cutter Saw 4 Inch Hole Saw Blade for Easily Drilling Soft Metal, Plywood, Plastic, Drywall, Wood, Fiberboard by AConnet (102mm)

【High Performance Material】The 4 inch hole saw is made of M42 high speed steel and bi-metal, with higher hardness (≥64HRC), toughness and wear resistance, increased service life..
【Hole Saw Dimensions】Cutting diameter: 4 inch (102mm).
Hole saw arbor shank: 7/16 inch (12mm), fits 1/2" drills..
【Efficient Smooth Cutting】The hole saw blade is combine with sharp teeth, bi-metal band and non-binding clean edge.
Sharp duplex tooth for nice edge and sharp.
Therefor the hole saw blade cuts smoothly, cleanly and quickly..
【Package Include】 Package include 1 pcs 102mm hole saw, 1 pcs 7/16" hole saw arbor, 3 pcs high-speed steel pilot drills and 1 pcs Allen wrench. Contact us if there any problem with the product. We attach great importance to customer's shopping satisfaction and are willing to solve any problems you have..

Check Stock

Lenox Tools - T29964-64CG LENOX Tools Hole Saw, Carbide Grit, 4-Inch or 102mm (2996464CG)

Carbide grit hole saw cuts through a wide range of abrasive materials.
Hole saw has a clean-cutting carbide grit edge that won't snag or chip when cutting thin materials.
Use the hole saw with a 2L or 7L standard arbor or a 2L SNAP-BACK arbor.
Heat resistant carbide teeth for long life in tile and stainless steel..

Check Stock

VIKITON 1 inch Hole Saw with Arbor for Cutting Metal Wood and Plastic, 25mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal, Handy Hole Saw Kit Set

Longer Service Life: Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance.
Superior Versatile Performance: High speed steel sharp cutting tooth can effectively drills through metal , wood , PVC board , plastic and drywall , flat and smooth , high precision.
Easy to Use: Pass the pilot drill bit on the connecting arbor through the center circular hole on the back of the hole saw, and rotate the connecting arbor until it is tightened..
High Work Efficiency : The deep gullets on the sides of hole saw provides fast chip removal.
Tool Kit Includes: 1" hole saw, 1 pilot drill bit for replacement, 1 arbor(contain 1 drill bit), 1 hex key.

Check Stock

Acekit 2 1/4 inch Hole Saw With 3/8 Arbor HSS Bi-Metal Hole Saw Blade And Variable Teeth Pitch For Wood,Plastic Board,Pipe,Plywood,And Soft Metal Sheet (57mm)

【HIGH PERFORMANCE】the hole saw made of M42 high speed steel and bi-metal ,dual slots for quick remove the chipped material,heavy duty and durable with large and sharp variable teeth pitch for fast and precisely cutting.
【DIMENSIONS】diameter of the hole saw about 57mm for 2 1/4 inch hole cutting, depth of the hole saw about 1 inch (25mm).
【QUICK CHANGE ARBOR】size of the screw in arbor is 3/8 inch for quick change mandrel, fits both 3/8 and 1/2 inch drills.
【BONUS】the hole saw came with a allen wrench for drill bits installation , so you need not to pay extra money for it, and 1 pack of extra drill bits for long term usage.
【WIDE APPLICATION】With the hole saw, you can easily cut precise hole for wood/plywood/laminated/PVC board, plastic pipe, ceiling ,kitchen cabinet hole cutting, you can also use it to cut hole for soft metal sheet (kind remind: for metal sheet cutting constant cooling with water will be good for long-term usage and fast cutting).

Check Stock

ZOENHOU 2 Set 3 Inch 75 mm Hole Saw with Arbor, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter, Hole Drilling Tool Drill Bit Saw for Cutting Wood, Metal, Plastic, Fiberboard

TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi-metal drill bit: easy and fast, smooth and clean cutting..
EFFICIENT AND DURABLE - 0.43 inch hex shank arbor with two pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
ONE SET WORKS IT ALL- This complete HSS hole cutter including 2 pieces 2-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.43 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
100% RISK-FREE SHOPPING - If you are not satisfied with our 3 Inch 75 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our first priority..

Check Stock

76mm / 3 Inch BI-Metal Hole Saw with Arbor and Replacement Pilot Drill Bit, Hole Cutter for Easily Drilling Wood, Plastic, Thin Metal

This 3" Hole Saw Drill Bit is designed for wood / plastic cutting..
Non-binding clean edge design make the hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
It is made of M42 BI-Metal and High Speed steel, Durable and cuts clear.

Check Stock

VIKITON 6 Inch Hole Saw with Arbor for Metal Wood and Plastic Cutting, 152mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal, Handy Hole Saw Kit Set

【Long Service Life】Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance..
【Superior Versatile Performance】High speed steel sharp cutting teeth effectively drills through metal , wood , corn hole boards, PVC board , plastic and drywall , clean and smooth , high precision..
【Easy to Use】Rotate the arbor and hole saw until it's very close (don't need tight), then line up the locking pins with the hole at the hole saw and screw them tightly..
【High Efficiency】The deep gullets on the sides of hole saw provides fast chip removal, and the geometry funtional slot on the bottom of hole saw provides easy plug removal..
【Package Include】1 pc 6'' hole saw, 1 pc arbor(with 1 drill bit), 1 pc drill bit for replacement, 1 pc hex key..

Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.

Check Stock

Koopi 2 Inch BI-Metal Hole Saw with Arbor and Replacement Pilot Drill Bit, 51mm Dia Hole Cutter for Easily Drilling Wood, Plastic, Thin Metal

This 2" Hole Saw Drill Bit is designed for wood / plastic cutting..
Arbor shank diamater- 3/8 in (fit for all 1/2"&3/8" drill).
Non-binding clean edge design make the hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
It is made of M42 BI-Metal and High Speed steel, Durable and cuts clear.

Check Stock

ZOENHOU 2 Set 4 Inch 102 mm Hole Saw with Heavy Duty Arbor, Hole Cutter HSS Bi-Metal, Heavy Duty Steel Blade Hex Shank Drill Bits Smooth and Fast Cutting of Wood, Iron, Hard Plastic, Galvanized Pipe

TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi metal drill bit: easy and fast, smooth and clean cutting..
EFFICIENT AND DURABLE - 0.44 inch hex shank arbor with 2 pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling the saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
ONE SET WORKS IT ALL - This complete HSS hole cutter including 2 pieces 4-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.44 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
100% RISK-FREE SHOPPING - If you are not satisfied with our 4-Inch 102 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our top priority..

Check Stock

EZARC Bi-Metal Hole Saw Kit, 7-Piece Hole Saws Set Cobalt Drill Hole Cutter with Mandrels for Sheet Metal, Wood, Drywall, Aluminum, Plastic Plate, Plasterboard

【Long-lasting & Durability】Professional high speed steel M42 (not M2) with 8% cobalt ensures more heat resistance of the teeth, This hole saw provides more than 50% longer lifetime on drilling various materials such as metal, hard wood, plastic and plasterboard..
【Efficient Plug Remove】Our metal hole saw kit with 3X sideling slot design can effectively remove plugs and increase operating speed..
【Fast & Clean Cutting】The 4/6 variable teeth configuration allow hole saw kit for metal and wood to provide clean and fast cutting in the most demanding applications..
【Hex Shank Arbor with Adapter】EZARC hex shank arbor with an extra adapter can fit all size metal hole saws from small to large diameters. The pilot drill bit is made of premium high-speed steel for precise positioning and rapid drilling for longer service life..
【Complete Hole Saw Set】5pcs M42 Bi-metal hole saw: 7/8’’ (22mm), 1’’ (25mm), 1-1/8’’ (29mm), 1-1/4’’ (32mm), 1-1/2’’ (38mm) to meet needs of different situations. 1 x Mandrel with Adapter and 1 x Plastic Case for easy storage. The maximum cutting depth is 1-7/8" (48mm)..

Check Stock