ReviewsArbor For Hole Saw

VIKITON 6 Inch Hole Saw with Arbor for Metal Wood and Plastic Cutting, 152mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal, Handy Hole Saw Kit Set

【Long Service Life】Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance..
【Superior Versatile Performance】High speed steel sharp cutting teeth effectively drills through metal , wood , corn hole boards, PVC board , plastic and drywall , clean and smooth , high precision..
【Easy to Use】Rotate the arbor and hole saw until it's very close (don't need tight), then line up the locking pins with the hole at the hole saw and screw them tightly..
【High Efficiency】The deep gullets on the sides of hole saw provides fast chip removal, and the geometry funtional slot on the bottom of hole saw provides easy plug removal..
【Package Include】1 pc 6'' hole saw, 1 pc arbor(with 1 drill bit), 1 pc drill bit for replacement, 1 pc hex key..

Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.

Check Stock

Koopi 2 Inch BI-Metal Hole Saw with Arbor and Replacement Pilot Drill Bit, 51mm Dia Hole Cutter for Easily Drilling Wood, Plastic, Thin Metal

This 2" Hole Saw Drill Bit is designed for wood / plastic cutting..
Arbor shank diamater- 3/8 in (fit for all 1/2"&3/8" drill).
Non-binding clean edge design make the hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
It is made of M42 BI-Metal and High Speed steel, Durable and cuts clear.

Check Stock

ZOENHOU 2 Set 4 Inch 102 mm Hole Saw with Heavy Duty Arbor, Hole Cutter HSS Bi-Metal, Heavy Duty Steel Blade Hex Shank Drill Bits Smooth and Fast Cutting of Wood, Iron, Hard Plastic, Galvanized Pipe

TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi metal drill bit: easy and fast, smooth and clean cutting..
EFFICIENT AND DURABLE - 0.44 inch hex shank arbor with 2 pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling the saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
ONE SET WORKS IT ALL - This complete HSS hole cutter including 2 pieces 4-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.44 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
100% RISK-FREE SHOPPING - If you are not satisfied with our 4-Inch 102 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our top priority..

Check Stock

EZARC Bi-Metal Hole Saw Kit, 7-Piece Hole Saws Set Cobalt Drill Hole Cutter with Mandrels for Sheet Metal, Wood, Drywall, Aluminum, Plastic Plate, Plasterboard

【Long-lasting & Durability】Professional high speed steel M42 (not M2) with 8% cobalt ensures more heat resistance of the teeth, This hole saw provides more than 50% longer lifetime on drilling various materials such as metal, hard wood, plastic and plasterboard..
【Efficient Plug Remove】Our metal hole saw kit with 3X sideling slot design can effectively remove plugs and increase operating speed..
【Fast & Clean Cutting】The 4/6 variable teeth configuration allow hole saw kit for metal and wood to provide clean and fast cutting in the most demanding applications..
【Hex Shank Arbor with Adapter】EZARC hex shank arbor with an extra adapter can fit all size metal hole saws from small to large diameters. The pilot drill bit is made of premium high-speed steel for precise positioning and rapid drilling for longer service life..
【Complete Hole Saw Set】5pcs M42 Bi-metal hole saw: 7/8’’ (22mm), 1’’ (25mm), 1-1/8’’ (29mm), 1-1/4’’ (32mm), 1-1/2’’ (38mm) to meet needs of different situations. 1 x Mandrel with Adapter and 1 x Plastic Case for easy storage. The maximum cutting depth is 1-7/8" (48mm)..

Check Stock

Koopi 6 inch Hole Saw for Making Cornhole Boards, BI-Metal Heavy Duty Steel Corn Hole Saw , Great 152mm Hole Drill Bit for Cutting Wood, Plastice, Sheet Metal (6in Dia)

This 6" Hole Saw drill bit is designed for cutting circle holes in corn hole boards, wood, plastic, thin metal.
Non-binding clean edge design make the hole saw blade cuts smooth and fast..
This cornhole saw is made of M42 BI-Metal and High Speed steel, Durable and cuts clear.
Arbor shank diamater- 3/8 in,fit all 3/8" or 1/2" drills..

Check Stock

EZARC Bi-Metal Hole Saw Kit, 13-piece Hole Saws Set Cobalt Drill Hole Cutter with Mandrels for Sheet Metal, Wood, Drywall, Aluminum, Plastic Plate, Plasterboard

【Long-lasting & Durability】Professional high speed steel M42 (not M2) with 8% cobalt ensures more heat resistance of the teeth, This hole saw provides more than 50% longer lifetime on drilling various materials such as metal, hard wood, plastic and plasterboard..
【Efficient Plug Remove】Our metal hole saw kit with 3X sideling slot design can effectively remove plugs and increase operating speed..
【Fast & Clean Cutting】The 4/6 variable teeth configuration allow hole saw kit for metal and wood to provide clean and fast cutting in the most demanding applications..
【Hex Shank Arbor with Adapter】EZARC hex shank arbor with an extra adapter can fit all size metal hole saws from small to large diameters. The pilot drill bit is made of premium high-speed steel for precise positioning and rapid drilling for longer service life..
【Complete Hole Saw Set】9pcs M42 Bi-metal hole saw: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm),to meet needs of different situations. 1 x Small Mandrel, 1 x Large Mandrel with Adapter and Pilot Drill Bit. The maximum cutting depth is 1-7/8" (48mm)..

Check Stock

KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4

...th metal but not high strength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill or machine drill.
HSS bi-metal hole saws are much better than and totally different from any carbon steel ones (work on wood only, no metal)..
Packed in high quality carrying case. Please note that it shows "HSS M3" on the carrying case but actually it is made of HSS M42 with cobalt 8%. You could see it on the hole saws.DescriptionHSS ....

Check Stock

KATA 6-Pack 2 Inch 50mm Desk Grommet Wire Cord Cable Hole Cover with M42 2 Bi-Metal Hole Saw Kit and 2M Cable Sleeve Organizer Cord Wire Wrap Coiled Tube Sleeve Management

【INCLUDES】1PC 51mm (2") M42 Bi-Metal Hole Saw Blade,38mm Depth.
【PREMIUM MATERIAL】The Hole Saw is made of M42 Bi-Metal high speed hacksaw blade,high wear resistance, sharp cutting head, efficient and accurate....
【SIMPLE BUT USEFUL】Installation is simple and convenient:Drill a hole on the desktop with the hole saw blade and the mandrel arbor,then put the....
【KEEP CLEAN AND TIDY】The desk grommets and cable sleeve can effectively manage cables and wires,keep the desktop clean and tidy..
【APPLICATION】The M42 bi-metal hole saw is ideal for hand electric drill, bench drill, etc.Can cut holes easily on wood, iron plate, hard plastic,....

Check Stock

Scotchman CPO 350 Cold Saw Blade - 350 x 2.5 x 40 HSS M2 DMo5 (150 Teeth)

This HSS saw blade was made to fit on all Scotchman CPO 350 model machines including CPO 350, CPO 350 PK, and CPO 350 PKPD..
14 inch Cold Saw Blade - 350mm diameter x 2.5mm thickness x 40mm arbor hole Cold Saw Blade.
This blade comes with a universal pinhole pattern to fit all machines with a 40mm arbor hole..
Made from the highest quality M2 DMo5 tool steel. Heat treated and hardened to 65 HRc, triple tempered, and press quenched to preserve flatness..

Check Stock

Scotchman CPO 275 Cold Saw Blade - 275 x 2.0 x 32 HSS M2 DMo5 (220 Teeth)

This HSS saw blade was made to fit on all Scotchman CPO 275 model machines including CPO 275, CPO 275 PK, and CPO 275 PKPD..
11 inch Cold Saw Blade - 275mm diameter x 2.0mm thickness x 32mm arbor hole Cold Saw Blade.
This blade comes with a universal pinhole pattern to fit all machines with a 32mm arbor hole..
Made from the highest quality M2 DMo5 tool steel. Heat treated and hardened to 65 HRc, triple tempered, and press quenched to preserve flatness..

Check Stock