ReviewsArbor For Stud Removal

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • REPLACe A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors.
  • GM R4 and A6, HR-6, DA-6 and V A/C compressors.
  • sander compressors SD 505, 507, 575, 708, and 709.
  • Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (2....
Check Stock

Makita A-95978-5 6\ x 1/4\ x 7/8\ INOX Grinding Wheel, 36 Grit, 5/pk

  • Aggressive composition for faster material removal.
  • Reduced vibration for superior user experience.
  • High strength bonding agent for added durability and long life.
  • 36 abrasive grit for efficient material removal.
Check Stock

PNBO Manual Arbor Press 0.5 Ton,Heavy Duty Desktop Punch Press Machine for Riveting Punching Holes

  • 【CARBON STEEL MATERIAL】:Our arbor press is made of high-quality Cast Iron material. So its body is very sturdy and durable. It can ensure your safe and stable operation..
  • 【0.5 TON PRESSURE】: This arbor press can apply up to 0.5 ton pressure in your operation. Adjust the appropriate pressure to complete the installation, removal or compression of your work pieces. The maximum working height is 3.54in/90mm..
  • 【STABLE BASE】: The arbor press base has 4 fixing holes. The movable machined steel anvil provides accurate work support at the four slot positions. Make your work safe and smooth..
  • 【SLOTTED TABLE-PLATE】:The manual press has an anvil plate. It is slotted for various applications, if you have other needs, you can move and replace it..
  • 【VARIOUS APPLICATION】:It is mainly used to press the bearing and the workpiece with hard fitting.such as riveting, punching, bending, and other pressing applications..
Check Stock

BestEquip Manual Arbor Press 1 Ton Heavy Duty Arbor Press with 4-5/8 Inch Maximum Height Manual Desktop Arbor Press Cast Iron Material for Riveting Punching Holes

  • Easy Operation & 2 Ton: This arbor press attachment can apply 2 ton of force to facilitate installation, removal, and pressing of items by lowering....
  • Premium Iron Material: Made of high quality iron material, this 2 ton arbor press features simple structure, stability and reliability, offering....
  • Slotted Table-Plate: The hand press comes with an anvil plate, which measures 6.7in/170mm diameter. It is slotted for various application and can be....
  • Strengthened Base: Designed with thickened and solid base, pre-drilled for mounting on either a bench or pedestal to keep the rivet press sturdy, to....
  • Various Application: This arbor press 2 ton load capacity is suitable for riveting, squeezing, punching, bending, and other pressing applications with....
Check Stock

SALI Grinding Wheel 6 Inch Bench Grinding Wheels for Surface Grinding White Corundum Bench and Pedestal Grinding Wheel Fit for Steel Applications 6 in x 1 in x 1 in

  • QUALITY SPECS: Premium white aluminum oxide wheel measures 6 inches in diameter, 1” in thickness, comes with 1” arbor hole and 3/4” , 5/8" ,1/2" arbor adapts..
  • APPLICATIONS: Works exceptionally well on tools like drills, mills or disposable tips and all soft carbon steels, tool steels and super alloys for grinding hardened steel,burring, grinding, stock removal, blending, rust removal, cleaning and finishing.
  • User Experience: During the grinding process, the grinding heat generated by the sharpening wheel is relatively small, and has excellent machinability. In addition, no harmful substances are produced, which is good for workers and the environment.
  • Sized as a 6 inch grinder wheel with a vitrified bond, this grinding wheel is designed to hold a superb shape and resistance to wear.
  • COMPATIBILITY: Abrasive wheel is designed to fit most bench grinder machines.
Check Stock

VIKITON 4 inch Hole Saw with Arbor for Metal Wood Plastic, 102mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal

  • 【Sharp and Durable】The hole saw is Bi-metal construction, which has special flexible steel saw body and high speed steel cutting teeth, with longer service life, and more sharp..
  • 【Wide Application】The hole saw can be widely used for cutting thin metals, wood, plater board, plywood, duct, drywall, soft plaster, corn hole boards and plastic, good enough for the average DIYer and professional project..
  • 【Easy to Use】Pass the pilot drill bit of arbor through the center circular hole on the back of the hole saw, and rotate the arbor until it is tightened..
  • 【High Work Efficiency】The deep gullets on the sides of hole saw provides fast chip removal.
  • 【Tool Kit Includes】4 in hole saw, 1 drill bit for replacement, 1 arbor(with 1 drill bit), 1 hex key.
Check Stock

Grinding Wheel for Grinders，Grinding Wheel for Metal ，Aggressive Grinding for Metal 25 Pack 4.5 Inch，1/4 Thick 7/9

  • Aggressive composition for faster material removal.
  • Innovative design for reduced noise,Grinding Wheels are designed for grinding steel and stainless steel for added versatility..
  • Reduced vibration for superior user experience.
  • High strength bonding agent for added durability and long life.
  • grit for efficient material removal，4.5Inch, 1/4" thick, 7/9" arbor hole.
Check Stock

BestEquip Heavy Duty Arbor Press 1 Ton, Ratchet Leverage Arbor Press with Handwheel, Manual Desktop Metal Arbor Press 4-5/8 Inch Max. Working Height, for Riveting Punching Holes

  • Easy Operation & 1 Ton: This arbor press attachment applies 1 ton of force to facilitate installation, removal, and pressing of items by lowering the steel ram through ratcheted leverage and a convenient handwheel. Max. Work Height: 4.33in/110mm..
  • Premium Iron Material: Made of high quality iron material, this 1 ton arbor press features simple structure, stability and reliability, offering incredible strength and rigidity needed for tougher jobs..
  • Slotted Table-Plate: The hand press comes with an anvil plate, which measures 3.54in/90mm diameter. It is slotted for various application and can be moved and replaced if you have other working demand..
  • Strengthened Base: Designed with thickened and solid base, pre-drilled for mounting on either a bench or pedestal to keep the rivet press sturdy, to ensure the smooth and efficient work..
  • Various Application: This arbor press 1 ton load capacity is suitable for riveting, squeezing, punching, bending, and other pressing applications with different accessories, widely used in assembly and repair industries..
Check Stock

VIKITON Hole Saw Kit for Metal and Wood Plastic Project, Bi-Metal Hole Saw Set with Case from 7/8'' to 2-1/2'', Hole Cutter with Flat and Smooth Cutting Drilling Edge, Fast Chip Removal

  • Long Service Life : Hole Saw Kit, Bi-metal construction , special flexible steel saw body and high speed steel cutting teeth , for long service life , rust proof , great corrosion and heat resistance..
  • Superior Versatile Performance : High speed steel sharp cutting teeth effectively drills through metal , wood , PVC board , plastic and drywall , clean and smooth , high precision ..
  • Kit Includes: 7/8’’ , 1-1/8’’ , 1-3/8’’ , 1-3/4’’ , 2’’ , 2-1/2’’ hole saws , 1 pilot drill bits for replacement, 1 big arbor (1 drill bit), 1 small arbor (1 drill bit), 1 hex key..
  • High Efficiency : The deep gullets on the sides of hole saw provides fast chip removal , and the geometry funtional slot on the bottom of hole saw provides easy plug removal ..
  • Storage Conveniently : Kit box included for easy storage and carry , free of worry about losing small parts in the kit after handling, handy kit..
  • Suitable for: This kit is high performance cost ratio tool set, easy to operate, very suitable for DIYers to do some normal project around house and yard..
Check Stock

VIKITON 6 Inch Hole Saw with Arbor for Metal Wood and Plastic Cutting, 152mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal, Handy Hole Saw Kit Set

  • 【Long Service Life】Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance..
  • 【Superior Versatile Performance】High speed steel sharp cutting teeth effectively drills through metal , wood , corn hole boards, PVC board , plastic and drywall , clean and smooth , high precision..
  • 【Easy to Use】Rotate the arbor and hole saw until it's very close (don't need tight), then line up the locking pins with the hole at the hole saw and screw them tightly..
  • 【High Efficiency】The deep gullets on the sides of hole saw provides fast chip removal, and the geometry funtional slot on the bottom of hole saw provides easy plug removal..
  • 【Package Include】1 pc 6'' hole saw, 1 pc arbor(with 1 drill bit), 1 pc drill bit for replacement, 1 pc hex key..
Check Stock

POWERTEC 15508 Silicon Carbide Grinding Wheel 150 Grit, 6\ x ¾\ with 1/2\ Arbor

  • INCLUDES: 6” Silicon Carbide Grinding Wheel w/ 150 grit.
  • FUNCTION: Provides clean, fast, high precision edges and surfaces for non-ferrous tools and metals such as aluminum, copper or titanium.
  • APPLICATIONS: Works exceptionally well on tools like drills, mills or disposable tips for burring, grinding, stock removal, blending, rust removal, cleaning and finishing.
  • QUALITY SPECS: This silicon carbide wheel measures 6 inches in diameter, 3/4” in thickness, comes with a ½” arbor hole size, and possesses a 3450 maximum RPM.
  • COMPATIBILITY: Abrasive wheel is designed to fit most stationary bench grinder machines and work benches.
Check Stock