ReviewsArc Stud Bolts

CDHPOWER 2 Stroke LD90 Motor w/o CDI -Upgraded pk80 Motor Silver Color Engine-Gas Motorized Bicycle 66cc/80cc

  • CDHPOWER LD90 Motor w/o CDI and Excluding 2pcs anti vibration black rubber for the motor mount,upgraded pk80 motor.
  • better adjusting Clutch a little before riding..
  • Includinhg spark plug and piston kit；Excluding two head plug CDI Box ( Asin for two head plug CDI: B098Q988VJ ).
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
  • FYI: the LD90 motor is compatible with all brand 2 stroke 66cc/80cc gas motor kit.
Check Stock

Mini Vertical Milling Slide Mounted on Z Type Caste Iron Angle Plate -Direct Fit for Mini Lathes

  • Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing.
  • Base Dimension :50 x 55 mm * Sliding Table :90 x 50 mm * Vertical Travel 40 mm.
  • Tee- Slot width 9.5 mm Maximum *Jaw Opening : 70 mm * Adjustable Vice Jaws & Brass Gib.
  • Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness..
  • One base side of the Caste iron has 2 x Counter drills with suitable stud bolts to clamp the slide and the other has a continuous slot to fasten it through the lathe's toolpost stud. Check all pictures carefully.
Check Stock

QWORK 260/300/500A Ground Welding Earth Clamp, Brass A-shape Welding Ground Clamp Cable Copper Grip for Welding Machine ( 260A )

  • Brass: QWORK Ground Welding Earth Clamp is made of high-quality brass, excellent conductivity, oxidation resistance and long service life..
  • Wear-resistant: The A-type clip is not easy to fall off, it is safe and reliable to use, electroplated, and wear-resistant..
  • Various types of welding: Suitable for argon arc welding, submerged arc welding, resistance welding, stud welding and other welding equipment..
  • Easy to operate: Simple structure, convenient operation, stable performance, high reliability, it is a perfect substitute for manual welding machine..
  • Wide range of uses: Widely used in shipyards, machinery manufacturing, petroleum exploration, automobile manufacturing and other industries..
Check Stock

CDHPOWER PK80 Motor Replacement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • PK80 MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already.
  • better adjusting Clutch a little before riding.
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

DEWILL Broken Bolt Remover, Stud Extractor Tool to Locks and Removes 1/4-Inch to 1/2-Inch Rounded Studs, Hexagonal Flat - Suitable for Rust, Painted, Damaged Waste Bolts

  • ...o rotate the stud counterclockwise until it is removed.Then release and separate them in a clockwise direction..
  • EFFICIENT & VERSATILE - This stud removal tool is easy to operate and can help you get more rest time, whether it is the exhaust manifold, fuel plug, broken bolts, or broken, painted, rusted fastening screws The posts are effectively removed, but the threaded surface may be slightly worn due to the strong clamping force..
  • TRADITIONAL UPGRADE - Traditional bolt extractors are limited in size, and too many types of extractors waste space and cost. It's too much trouble for your mood, so we designed an auto-adjustable extractor that easily clamp the damaged studs for stripping, saving you valuable time，It is definitely a great addition to your toolbox..
  • GUARANTEE SERVICE - Provide 100% satisfactory and reliable customer service within 24 hours. If you have any needs, please contact us immediately, we promise to give you a satisfactory answer..
Check Stock

QJKW Rivet 15Pcs M5 6-50mm Steel Flat Round Double Caps Studs Rivets Stud Fastener Set Bolts and Nuts Metic nut and Bolt Assortment Robust and Durable (Stem Length : M5X15MM)

  • Steel flat round double-head stud rivets.
  • Used in riveting, decoration, fastening..
Check Stock

Tricktoppers 4 Black Anodized Knurled Billet Aluminum Motorcycle License Plate Frame Fastener Tag Bolts - 44 Mag Revolver Gun Cylinder Printed Emblem

  • 4 Custom Knurled Billet Aluminum Custom Logo Motorcycle License Plate Frame Tag Bolts For Most Motorcycle Models With Through Hole Mounting Brackets Like Harley, Honda, Ducati, Kawasaki, Victory,Indian & Many More Makes.
  • Features: Black Anodized Aluminum Finish Knurled Sides Large 1/4" Tall By .8" Round Billet Aluminum Head Custom Graphic Logo Steal Treaded Stud x 3/4" Long . No tools required to install with included wing nut fastener. MADE IN THE U S A.
  • Logo Features: High Resolution Graphics Printed on 3M Automotive Grade Vinyl Gel Top Polyeurethane Domed Sealed Graphics UV & Fade Resistant Graphics Scratch & Water Resistant Graphics Logo Size 3/4" Pre-installed for you by us.
  • Part Warnings: For Minimum 1/4 License Plate Holes That can be accessed from rear to tighten combo bolts Not Recommended for most cars & trucks with machine or metal screw mounting with limited or no access to rear of license plate to tighten tag bolts May work with some bumpers with access to back side to tighten nuts on some cars & trucks or trailers.
Check Stock

Garage Door Extension Spring 27x48x220 for 8' High Doors 220LB Green (Qty 2)

  • Replacing the pulleys on your door will make the door run much smoother and prevent cable wear. Replace the door cable and install.
  • PLEASE-INSTALL SAFETY CABLES ON YOUR EXTENSION SPRING DOOR 6 RIVETS IN EACH HEAVY DUTY BALL BEARING PULLEY.
  • INCLUDED IN THIS KIT: 2 - 3" STUD PULLEYS 2 - 3" CLEVIS PULLEYS 4-3/8" BOLTS 4-3/8" NUTS 4-3/8" LOCK WASHERS 1 PAIR-1/8" DOOR CABLE 1 PAIR-1/8" SAFETY CABLE 2-CABLE LACING BRACKETS 2-S HOOKS 2-5/16" EYE BOLTS 4-5/16 NUTS.
  • INSTRUCTION SHEET REPLACING THE PULLEYS ON YOUR GARAGE DOOR MAKES THE WORLD OF DIFFERENCE YOUR DOOR WILL RUN MUCH SMOOTHER. THIS IS NORMAL MAINTENANCE THAT CAN EASILY.
Check Stock

dynofit 5x110 Wheel Spacers for Je/ep Renegade 2014-2019 1 25mm Forged M12x1.5 65.1mm Hub Centric 4 Packs for Compass 2018-2019 Cherokee 2014-2019 Dart 2012-2016 Saab 9-3/3x 94-98 Saab 900

  • ★Fitment: 2014 - 2018 Je/ep Renegade, 2018-2019 Je/ep Compass, 2014-2019 Je/ep Cherokee, 2012-2016 Do/dge Dart, 1998-2014 Saab 9-3, 2009-2011 9-3x,....
  • ★Specs: Bolts Pattern(PCD): 5x110mm, Hub Bore: 65.1mm, 1 inch(25mm) thick/each, 12mmx1.5 stud/nus, come with 4pcs heavy duty and durable hubcentric....
  • ★Benefits: Forged 6061-T6 Aluminum Alloy(CNC'd), 10.9 grade bolts(SGS Test Approved Steel ), precisely machined and nice black anodized finish, the....
  • ★Easy installation: easy bolts on, taking 1-2 hours, more tips and attention in description.
  • ★Warranty: 100% brand guarantee, free sales service, contact us if any problems and reply in 24h.
Check Stock

PENSON & CO. 5/8

  • Clamp a wide range of workpieces securely to the table while machining, milling or drilling.
  • Made of high grade steel and all the blocks, bolts, nuts and hold-downs are case hardened..
  • Racks can be bolted to the wall or side of machine for easy access. Best among mini clamps press tool sets.
  • This machine clamping kit provides a variety of add-ons to fully utilize Central Machinery's two speed variable bench mill/drill machine.
  • Include a variety of flange nuts, tee nuts, step blocks, coupling nuts, studs and hold down bars to fit almost any machine clamping need.Description58Pc Deluxe Steel Clamping Kit 5/8" T-Slot 1/2"-13 Stud-Size for Bridgeport Mill.
  • Compatible with all Bridgeport and Bridgeport type machines.
  • Well-organized set with each tool having it's slot.
Check Stock

(10000pcs) 5-40X1/4 Flush Head Self-Clinching Studs Steel, Zinc Plated

  • Ships Directly from Europe with 3-4 day delivery to USA - Shipping and all duties included in price.
Check Stock