ReviewsArduino Mega Official

ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE UNO R3 MEGA Nano

  • Updated from the old version (others): Received great ideas from our customers and adopted in this upgraded kit..
  • Removed useless modules like light cup and mercury module, heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS1307 real time clock module etc..
  • Upgraded tutorial only for R3, MEGA R3, NANO in CD, listing paper, resistors pack only from Elegoo Team. There are tutorials in the CD that comes with. If you prefer download the tutorials online from the official website.
  • 100% compatible with Arduino official IDE, Raspberry Pi and STM32..
  • Note: To use Elegoo starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying..
Check Stock

ACEIRMC 2pcs for MEGA 2560 PRO Embed CH340G/ATMEGA2560-16AU Chip with Male Pinheaders Compatible for Arduino Mega2560 Module

  • MEGA 2560 PRO Board Embed CH340G/ATMEGA2560-16AU Chip with Male pin headers, Compatible for arduino Mega2560 DIY.
  • Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G..
  • Board have compact size 38x55mm. It is good solution, to make your final project on solder proto-board..
  • Board for functionality similar to the compatible for Arduino Mega 2560..
  • The board used the chip CH340G as converter UART-USB..
Check Stock

FTCBlock Protoshield V3 Prototype Expansion mega Shield Bread Board for Arduino Mega2560/1280 UNO

  • Latest uno proto shield prototype expansion board with 170 ties mini breadboard..
  • 170 ties mini breadboard based for arduino,compatible with UNO R3..
  • Components can be soldered directly on the board, or through the mini breadboard above..
  • Used in conjunction with the Duemilanove ProtoShield prototype expansion board, the circuit is used to build a prototype.
  • Full Compatible with Arduino Mega ATmega1280 / MEGA2560..
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

Electronics-Salon Screw Terminal Block Breakout Module, for Arduino MEGA-2560 R3.

  • Terminal Block Breakout Module - for Arduino MEGA-2560 R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header..
  • FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Mega module.
Check Stock

Arduino Mega 2560 REV3 [A000067]

  • Arduino Mega 2560 is designed for your most ambitious projects which require additional pins and extra memory.
  • Based on the 8-bit AVR microcontroller ATmega2560, it has 54 digital I/O pins, 16 analog inputs and a larger space for your sketches.
  • Compatible with most shields designed for the Arduino Uno.
  • Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users..
Check Stock

AOICRIE Upgraded Advanced Version 37 in 1 Sensor Modules Kit with Tutorial Compatible for IDE R3 MEGA2560 for Nano, Starter The RFID Learn Suite Kit LCD 1602 for R3

  • 37 Sensors Assortment Kit for Arduino MCU Education.
  • RFID Starter Kit for R3 Upgraded version Learning Suite With Retail Box Upgraded Version of Starter Kit RFID Stepper Motor Learning Kits with a CD for starter learning !!!.
  • Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+, Complete Update and common models for Mega 2560 starter kit..
  • Great sensor kit with tutorials compatible for raspberry pi, Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
  • Upgraded tutorial only for R3, for MEGA2560 R3, for NANO in CD, listing paper, There are tutorials in the CD that comes with. or download the tutorials online from the official website..
Check Stock

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • ! ! ! Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact us..
Check Stock

ELEGOO UNO Project Basic Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE

  • The cheapest and most basic electronic components kit for Arduino beginner.
  • Free PDF tutorial including project introduction and code will be provided, you can save a lot of time searching them..
  • With the newest UNO R3 development board + USB Cable and all the basic components..
  • Nice package in the box with clear listing and CD..
  • 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO, Arduino kit..
Check Stock

Fingerprint Heartbeat Detector

  • This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not Included..
  • It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without Raspberry Pi tutorials..
  • Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be used with the Arduino platform, but can also be used with the Raspberry Pi platform as well..
  • Packed well in nice box, also each item packed well separately..
  • High quality kit for those beginners who are interested in programming. 100% compatible with Arduino R3, MEGA 2560, NANO, Raspberry pi and more..
Check Stock

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock