ReviewsArduino Pro Mini

Gikfun Solder-able Breadboard Gold Plated Finish Proto Board PCB DIY Kit for Arduino Pack of 5PCS GK1007

  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in....
  • Breadboard PCB for any type Raspberry Pi GPIO.
  • Gold plated finish prevents oxidation, High quality Gold finish for easy soldering.
  • All holes are through-plated for strength.
  • Adaptable with a variety of MCU boards. Compatible with Arduino Nano, Pro Mini, NodeMCU, etc..
Check Stock

ARCELI ESP-12E ESP8266 UART WiFi Wireless Shield Compatible with Arduino UNO R3

  • Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini).
  • 3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap..
  • It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance..
  • Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better..
Check Stock

DFPlayer - A Mini MP3 Player

  • The DFPlayer Mini MP3 Player For Arduino is a small and low price MP3 module with an simplified output directly to the speaker..
  • It supports common audio formats such as MP3, WAV and WMA..
  • The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other....
Check Stock

ElectroCookie Prototype Board Breadboard Style PCB Solder Board for Arduino and DIY Electronic Projects, Gold-Plated (6 Pack + 7 Screw Terminal Block Connectors, Multicolor)

  • Useful in transferring breadboarded prototypes to reliable and permanent circuits.
  • Popular breadboard alignment for versatile prototyping purposes.
  • Adaptable with a variety of MCU boards like Arduino Nano, Pro Mini, NodeMCU, etc..
  • Gold plated finish to prevent oxidation, and all holes are through-plated for mounting strength.
  • Lead free and RoHS compliant, longer shelf life.
Check Stock

KEYESTUDIO 48 Sensors Modules Starter Kit for Arduino with LCD, 5v Relay, IR Receiver, LED Modules, Servo Motor, Temperture, Gas Sensor, Programming for Beginners Adults Learning

  • This electronic sensor kit contains 48 pieces most popular and mainstream sensors and modules, allow you to do a lot devices, robots and other interactive device with the best price. This kit Not contains arduino controller board..
  • Compatible with various micro-controllers and Raspberry Pi, such as mega 2560, r3 development board, pro micro, leonardo, etc. Note we only offer arduino instructions..
  • We provide detailed projects for each sensor based on development board, including wiring method, test code, etc. Download the arduino tutorial from wiki website..
  • This is high quality sensor kit with exquisite packaging. It's a perfect present for junior high and high school inventors, hackers, designers, and tinkerers of all levels..
  • The tutorial shows wiring for the Arduino and gives example code. All of this makes getting started with sensors quite easy. The professional support team is ready to answer any questions..
Check Stock

Arduino Vidor 4000 [ABX00022]

  • The best of the embedded world: a low power microcontroller to handle reprogramming, communication, and analog sensing, together with an FPGA to perform high speed computation, and a dual WiFi-BLE chipset for wireless communication..
  • Mini HDMI output / MIPI camera input: can capture sound in real time, create a real-time computer reading sensor information,sending it to monitor or capture video, overlay sensor information on the image and send it to a screen..
  • Ideal for: Industry 4.0, home automation, computer vision, aerospace, telecommunications.
  • Part of the Arduino Maker Board Family for IoT Devices, easy to program with Arduino Software and Intel’s FPGA suite..
  • Easy interface between the microcontroller and the FPGA at the software level..
Check Stock

LGDehome Gold Plated Solderable Breadboard for DIY Electronics Projects Compatible with Arduino Soldering Projects Pack of 12 Black+Blue+Red+Green+Gold

  • Anti-Oxidation:High quality Gold plated finish to prevent oxidation,Accurate hole spacing,Board takes solder easily,and all holes are through-plated....
  • Wide application:Fit for a variety of MCU boards.Compatible with Arduino Nano, Pro Mini,ESP8266, NodeMCU,MCU boards etc.
  • Convenient to use:Perfect for moving projects from bread board to final project.Easy to connect to the components without using the header connectors.....
  • LeadFree and RoHS compliant for longer shelf life.
  • Package inlcuded:6 pack 2.05"x3.5" Gold-plated Solder-able Breadboard (2xBlak+2xBlue+2xRed)+5PCS Green double sided Breadboard+2 pcs Copper Strip....
Check Stock

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
  • The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
  • SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Check Stock

ACEIRMC 2pcs for MEGA 2560 PRO Embed CH340G/ATMEGA2560-16AU Chip with Male Pinheaders Compatible for Arduino Mega2560 Module

  • MEGA 2560 PRO Board Embed CH340G/ATMEGA2560-16AU Chip with Male pin headers, Compatible for arduino Mega2560 DIY.
  • Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G..
  • Board have compact size 38x55mm. It is good solution, to make your final project on solder proto-board..
  • Board for functionality similar to the compatible for Arduino Mega 2560..
  • The board used the chip CH340G as converter UART-USB..
Check Stock

Treedix USB to TTL Converter CH340 Module 3.3V/5.5v Serial Converter Development Tool with Micro USB Adapter for Arduino

  • Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
  • Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
  • The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
  • There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
  • Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.
Check Stock

Geekworm UNO R3 Case | Protective Enclosure ABS Computer Box for Arduino UNO R3/UNO WiFi REV2/UNO REV3- Black

  • This ABS black case is perfect compatible with Arduino UNO R3 development board, UNO WiFi REV2 or UNO REV3. (Arduino UNO Case).
  • Case Size: 7.5cm x 6cm x 2cm (2.95inch x 2.36inch x 0.78inch).
  • It is design with two nice "+" holes and 10 "-" holes for cooling....
  • It is very easy to install and Mini & attractive body to carry everywhere..
  • Note: The UNO R3 board is not included in the packing list..
Check Stock