ReviewsArduino Pro Mini 5v

SparkFun Qwiic Pro Micro - USB-C (ATmega32U4) - Compatible with Arduino development board 5V/16MHz microcontroller AP2112 3.3V Voltage Regulator Castellated PTH pin pads Reset button Maximum 6V input

  • Small Compatible with Arduino board. Includes Reset button, 9x 10-bit ADC pins. 12x Digital I/Os (5 are PWM capable).
  • Improved version of the SparkFun Pro Micro. ATmega32U4 running at 5V/16MHz Supported under Arduino IDE v1.0.1+.
  • On-Board USB-C connector for programming. AP2112 3.3V Voltage Regulator. PTH Pads w/ Castellated Edges.
  • Hardware Serial Connections. Includes UART (i.e. Rx and Tx), Qwiic Connector for I2C, and SPI. Has onboard Reset Button. Input maximum of 6V. Dimensions: 1.3in x 0.7in..
  • The AtMega32U4 can have the bootloader overwritten if not used properly. There is a way to fix the bootloader if needed and instructions are available online. USB drivers may be needed to be installed on a computer to communicate with the board..
Check Stock

DollaTek GY-30 BH1750FVI Digital Light Intensity Sensor Module I2C Raspberry Pi

  • ANMBEST Pulsesensor Pulse Heart Rate Sensor is a plug-and-play heart-rate sensor for Arduino and Arduino compatibles..
  • Pulse Sensor adds amplification and noise cancellation circuitry to the hardware. It's noticeably faster and easier to get reliable pulse readings. The Pulse Sensor works with either a 3V or 5V Arduino..
  • The sensor can be worn on the finger or earlobe..
  • Supported development boards are Uno R3, mega2560, leonardo, 51 series, msp430 series, KL25Z. s..
  • NOTE: This product is NOT a professional medical device and should not be used to diagnose or treat medical conditions..
Check Stock

Feob Mini Portable Charger 5000mAh, Small & Ultra-Compact 15W PD Fast Charging Power Bank, LCD Display Cute Battery Pack Compatible with iPhone 14/14 Pro Max/13/13 Pro Max/12/11/XR/X/8/7/6 and More

  • 【Plug in and Power on for iPhone】If you are a fan of iPhone and tired of carrying cables, this mini power bank is definitely the best choice for you. Super small and lightweight, dimensions is only 81.84*50.63*25.8mm (3.2''x1.96''x1''), only weigh 0.22lb, and no need cables..
  • 【Dual Input and Smart LCD Display】Dual Input(Type-C 5V/3.0A+ Other 5V/2A)you can use your Type-C Cable(Package Included) or iPhone cable to charge this mini power bank. Smart LCD display make it easy to know how much battery is left. no more guessing whether need to charge it or not. (Tips: The USB-C charging port support for both input and output.).
  • 【Multiple protection and Practical Pass-Through Technology】This Power bank built-in intelligent chip can protect your devices against over-discharge, over-charge, short-circuit or overheating. this battery pack supports pass-through charging,allows you to charge your iPhone and this small power bank simultaneously..
  • 【Potable Charger Designed for iPhone and AirPods 】Portable iPhone charger is widely compatible with iPhone 14, iPhone 14 Pro, 14 Pro Max, iPhone 14 Plus,iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 13 Mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 12 Mini, iPhone 11, iPhone 11 Pro, iPhone 1....
Check Stock

ACEIRMC for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (6 Pack)

  • download the driver of Nano V3.0 at: http://bit.ly/2jKlJMO.
  • Nano's got the breadboard-ability of the compatible for Board and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • The Nano is using the chips ATmega328P and CH340, not FT232 as official compatible for Arduino, so pls. use the driver from above link..
  • It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
Check Stock

AITRIP D1 Mini WiFi Dev Board,Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini (Pack of 6)

  • （pack of 6 ）This D1 mini module is a mini WIFI board based on ESP-8266EX..
  • Our D1 mini development board is 100% compatible with Arduino WeMos and can be programmed in Compatible with Arduino IDE..
  • Support OTA on line.Compatible withArduino compatibility. Using Compatible with Arduino IDE for programming..
  • This WLAN board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro-USB connection..
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
Check Stock

AITRIP 5 PCS Pro Micro ATmega32U4 5V/16MHz Module Board with 2 Row pin Header Compatible with arduino Leonardo Replace ATmega328 Pro Mini (5PCS)

  • On-Board Micro-USB connector for programming.
  • Pay attention to : 1.When you open the for Arduino IDE software, could you please go to the tool and choose the board "for Arduino Leonardo".
  • 2: The acceptable voltage range is 6 to 9 V..
Check Stock

20W USB C Wall Charger,NITASA 2-Pack Dual Port Fast PD+QC 3.0 Charger Block Plug for iPhone 13 12 11 Pro Max XR X SE iPad Mini Magsafe Galaxy Pixel,USB C Power Adapter for iPhone 13/12,13/12 Pro Max

  • ...9V2A,12V1.5A .When using USB-C and USB-A at the same time,the wall-mounted charger distributes output power of 15.5W to the two ports.USB-A+C=5V3.1A(15.5MAX).(Fast charging is not supported at the same time).
  • Compatible Models:20W usb c fast charger block with Power Delivery 3.0 can be fast charging for iPhone 13/13 Mini/13 Pro/13 Pro Max iPhone 12/12 Pro/12 Pro Max mini,11 pro max,SE 2/XR/XS,ipad mini/pro iPhone 8,Apple Watch 7,It can Support Quick Charge 3.0 and all standard USB-powered devices.20W usb c charger block also Compatible with PS5 Charging Station,nintendo switch,Samsung Note 20/10,Galaxy S21/S20/S10/S9/S8,Galaxy tablets,Google Pixel 6/5/4a,LG,MOTO G,TCL,oneplus,Magsafe wireless Charger.
  • Safe and Efficient: 20W usb-c power adapter plug for iphone series with smart chip passed ETL certification,Passed California Energy Efficiency Test,Efficiency Class VI.The usb c charger can be Over-current, over-voltage,and short-circuit protection effectively protect your devices from damage and ensure safer charging overnight.
  • Portable and easy to use:20W usb c wall charger is mini size and travle-Friendly.It can be using different scenes and more smart device.If you have any quality problems, please feel free to contact us. see the manual for details.
Check Stock

20W USB C Wall Charger,NITASA 2-Pack Dual Port Fast PD+Quick Charge 3.0 Charger Block Plug for iPhone 13 12 11 Pro Max SE/XR/X iPad Galaxy Pixel,USB C Power Adapter for iPhone 13/12 13 Pro Max 13 Mini

  • ...V2A,12V1.5A . When using USB-C and USB-A at the same time,the wall-mounted charger distributes output power of 15.5W to the two ports.USB-A+C=5V3.1A(15.5MAX).(Fast charging is not supported at the same time).
  • Compatible Models:20W usb c fast charger block with Power Delivery 3.0 can be fast charging for iPhone 13/13 Mini/13 Pro/13 Pro Max iPhone 12/12 Pro/12 Pro Max mini,11 pro max,SE 2/XR/XS,ipad mini/pro iPhone 8,Apple Watch 7,It can Support Quick Charge 3.0 and all standard USB-powered devices.20W usb c charger block also Compatible with PS5 Charging Station,nintendo switch,Samsung Note 20/10,Galaxy S21/S20/S10/S9/S8,Galaxy tablets,Google Pixel 6/5/4a,LG,MOTO G,TCL,oneplus,Magsafe wireless Charger.
  • Safe and Efficient: 20W usb c power adapter plug for iphone series with smart chip passed ETL certification,Passed California Energy Efficiency Test,Efficiency Class VI.The usb c charger can be Over-current, over-voltage,and short-circuit protection effectively protect your devices from damage and ensure safer charging overnight.
  • Portable and easy to use:Nitasa 20W usb c wall charger block is mini size and travle-Friendly.It can be using different scenes and more smart device.If you have any quality problems, please feel free to contact us. See the manual ....
Check Stock

Mini Portable Charger for iPhone, VEGER 5000mAh 20W PD Fast Charging Battery Pack, Cordless Portable External Backup Charger for iPhone 13, 12, 11, 8, 7, XR, XS Max, Pro Max, AirPods

  • Design for All iPhones and AirPods: Portable iPhone charger is widely compatible with iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 13 Mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 12 Mini, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone XR, iPhone 8, iPhone 8 Plus, iPhone X, iPhone 7, iPhone 7 Plus, iPhone XS Max, iPhone XS, iPhone Se, iPhone 6s, and also other iPhones, AirPods and AirPods Pro etc..
  • Quick Charge Recharging And Charging: Small portable charger for iphone, its USB C input supports QC 2. 0/ 3.0, FCP, AFC etc fast charging protocol (5V-2.0A, 9V-2.0A). Fully recharged only taking 1.5 hours by 9V-2A Quick recharging. Its output supports 20W PD, thus it can quick charge iPhone 8 and above iPhones series, will charge other iPhones at 5V normal charging speed..
  • Cordless Portable Charger, Plug in and Power on for iPhone: If you are iPhones fans and are tired of carrying cables, this mini cordless portable charger is definitely best choice for you. Ultra small and ultra lightweight, dimensions is only 77.2*35.0*24.7mm (3.03''x1.38''x0.97''), only weigh 0.2lb, and no need cables again..
  • Practical Pass-Through Features: Battery Pack supports pass through charging, when recharging power bank, it can charge your iPhones too by p....
Check Stock

Adafruit (PID 3316 VL6180X Time of Flight Distance Ranging Sensor (VL6180)

  • On Board 5V regulator and level shifting.
  • Works with Arduino and other micro controller projects.
Check Stock

ACEIRMC 8pcs Digispark Kickstarter Mini ATTINY85 USB Development Board Module Compatible for Arduino IDE 1.0

  • The Digispark is an Attiny85 based microcontroller development board similar to the line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar for Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when for Arduino is too big or too much..
  • The Digispark is shipped fully assembled except for the two included and easy to solder headers..
  • Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
  • Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection).
  • 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
Check Stock