ReviewsArduino Project Case

4PCS Breadboards Kit Include 2PCS 830 Point 2PCS 400 Point Solderless Breadboards for Proto Shield Distribution Connecting Blocks

400 point and 830 point breadboards are available to meet your various experimental needs..
White ABS Plastic Body with Black Printed Legend. Color Legend on Distribution Strips..
With Self-Adhesive Tape on the Back, Easy to Stick on the Arduino Prototype Shield..
Inter Connect Any Components with 20-29 Awg (0.3-0.8mm) Wire..
Good for Arduino Breadboard Jumper Wires kit Project and other Electrical DIY kits..

[Program Learning]: You will quickly learning the robot project program leaning, arduino project..
[Big Load]: This wheel set can have 5kg load, and the wheel diameter size is 97mm..
[DIY RoS]: Install the frame, together with motor, then you can quickly DIY robot mecanum wheel robot car chassis..
[Plastic Material]: This wheel is preminum plastic, but the coupling used to connect motor is metal..
[What You Get]: This macanum wheel kit includes 2 pcs left wheel + 2 pcs right wheel + 4 pcs 6mm coupling motor connector..

for ARDUINO COMPATIBLE - Use the Nano-C with the for Arduino development IDE on your PC, Mac or Linux computer (USB driver installation required on some OSes).
PERFECT FOR BEGINNER OR EXPERT - Learn electronics and programming or jump start your latest project. Get started with the Nano-C in just minutes.
The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
Nano C for Arduino | USB Type-C Connector | ATmega328P | 5V | 16MHz | Without Cable | Connectors Unsoldered.
Uses the latest USB Type-C connector for compatibility with modern laptop and desktop computers. The Type-C connector is fully reversible which makes connecting a breeze.

ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items).
ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE UNO R3 MEGA2560 Nano.
ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for....

The breakout board expands the connection with all the processor functions, the circuit board is well-made, gold-plated on both sides to prevent oxidation.
Simple and easy to assemble, it can be used in conjunction with a breadboard, the distance between the holes on the board is 2.54mm.
Widely compatible: all pins on the breakout board are accessible, and can be used in conjunction with Arduino IDE and Arduino compatible hardware.
Use this breakout board module to easily extend Tennsy 4.1 project to industrial control, home automation or other applications.
Note: The package is not include teensy development board.

MEGA 2560 PRO Board Embed CH340G/ATMEGA2560-16AU Chip with Male pin headers, Compatible for arduino Mega2560 DIY.
Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G..
Board have compact size 38x55mm. It is good solution, to make your final project on solder proto-board..
Board for functionality similar to the compatible for Arduino Mega 2560..
The board used the chip CH340G as converter UART-USB..

This ABS black case is perfect compatible with Arduino UNO R3 development board, UNO WiFi REV2 or UNO REV3. (Arduino UNO Case).
Case Size: 7.5cm x 6cm x 2cm (2.95inch x 2.36inch x 0.78inch).
It is design with two nice "+" holes and 10 "-" holes for cooling....
It is very easy to install and Mini & attractive body to carry everywhere..
Note: The UNO R3 board is not included in the packing list..

This Geekworm design ABS tranparent case is perfect compatible with Arduino UNO R3 development board, UNO WiFi REV2 or UNO REV3. (Arduino UNO Case).
Case Size: 7.5cm x 6cm x 2cm (2.95inch x 2.36inch x 0.78inch).
It is design with two nice "+" holes and 10 "-" holes for cooling system..
It is very easy to install and Mini & attractive body to carry everywhere..
Note: The UNO R3 board is not included in the packing list..
Packing List: 1x UNO R3 ABS Case-Transparent.

A plug 'n' play shield for experimenting with monitoring fleets, high-altitude measurements, or any kind of project requiring localization of devices..
Arduino MKR GPS Shield uses the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It is meant to be used on top of boards in the Arduino MKR boards, but thanks to its Eslov connector, it is also possible to hook it up to any board..
It comes with a dedicated library that allows two different interfaces and offers a consistent set of APIs designed for a full usage of the GPS acquired information..
Operating voltage is 3.3V, but this shield comes also with an on-board holder for CR1216 batteries..
The MKR GPS Shield has an additional connector meant as an extension of the I2C bus. The extra I2C port, also referred to as the Eslov self-identification port comes with: SDA, SCL, GND, +5V, and an extra digital pin, meant to send an alarm to the otherwise plain I2C devices connected to it..

Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
Use: Can be conveniently connected to other power module or Arduino board..
Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).

The pitch of each end of the wire is 0.1 inch (2.54mm).
40 pin jumper Wire are easy to separate from the ribbon.
Suitable for Arduino breadboard kit project, PCB project, PC motherboard, DIY experiment, 3D printer and etc..
Package content: 1 * 40 pin male to female jumper wires, 1 * 40 pin male to male cable and 1 * 40-pin female to female cable (total 120pcs)Description.
The wires are easy to peel apart and great for making good looking prototypes.
Work on a Raspberry pi breadboard projects, Raspberry pi robot build, Breadboard prototyping, Arduino and ky-040 rotary encoders..
Insert onto the SW LED pin on the typical desktop computer mother board..
Test bread boarding projects or for any breadboard experimenter..
1 * 11.8 inch 40 pin male to male Breadboard Jumper Wires.
1 * 11.8 inch 40 pin female to female Breadboard Jumper Wires.
1 * 11.8 inch 40 pin male to female Breadboard Jumper Wires.