ReviewsArduino Uno Kit Wikipedia

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

  • Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Uno module..
Check Stock

ARDUINO 2243680 K000007 Starter Kit with Compatible 9V Wall Adapter

Check Stock

OSOYOO Model 3 Robot Car DIY Starter Kit for Arduino | Remote Control App Educational Motorized Robotics for Building Programming Learning How to Code | IOT Mechanical Coding for Teens Adults

  • SIMPLE, EDUCATIONAL, FUN PROJECT — Control your OSOYOO Robot Car V2.0 for Arduino System by Android and iOS App, allowing many additional functions such as imitation driving, auto driving . This intelligent, new technology supports various projects such as line tracking, object motion following, obstacle avoidance and gravity sensing control..
  • PROGRAMMABLE STARTER KIT FOR TEENS, ADULTS AND PROFESSIONALS – The OSOYOO Robot Car Kit V2.0 is fully compatible with Arduino R3 board. Great for any skill level — whether you’re a pro, enthusiast, or a beginner, assembling your new robotic car kit will help you learn to create circuits, program sensors and actuators and get hands-on programming, coding, electronics and robotics experience.
  • THE BEST VALUE PACK — This Ultimate Gift Bundle Includes Everything You Need To Build and Engineer Your Own Robotic Car: Basic Board for UNO, USB Cable, Motor shield for UNO, Bluetooth Module, Ultrasonic Sensor & Holder, Servo Motor, Tracking Modules, Buzzer Sensor Module, Infrared IR Remote, & Receiver, 9V Battery Box, Voltage Meter, Acrylic Car Chassis, Motors & Wheels.
Check Stock

Geekworm UNO R3 Case | Protective Enclosure ABS Computer Box for Arduino UNO R3/UNO WiFi REV2/UNO REV3- Black

  • This ABS black case is perfect compatible with Arduino UNO R3 development board, UNO WiFi REV2 or UNO REV3. (Arduino UNO Case).
  • Case Size: 7.5cm x 6cm x 2cm (2.95inch x 2.36inch x 0.78inch).
  • It is design with two nice "+" holes and 10 "-" holes for cooling....
  • It is very easy to install and Mini & attractive body to carry everywhere..
  • Note: The UNO R3 board is not included in the packing list..
Check Stock

REXQualis Super Starter Kit Based on Arduino UNO R3 and Electronics Component Basic Kit Comes with More Than 300pcs sensors and Components

  • The most economical kit comes with everything compatible with Arduino to starting programming for beginners ..
  • Include High Quality Base Board base on Arduino UNO R3 compatible with Arduino IED and Sensors, Servo, Motor, ULN2003 driver board, lcds, etc..
  • This is the upgraded starter kits come with a 9V 1A Power Adapter (At least $5.99 on amazon) to replace a 9V Battery , and the Lcd1602 module come with pin header(not need to be soldered by yourself)..
  • REXQualis Electronics Component Basic Kit is a Highest Cost Components Kit, It comes with more than 300pcs sensors and components for fun and simple electronic projects..
  • REXQualis Electronics Component Basic Kit include a breadboard power supply, and come with a USB Power Cables, which is hard to find..
Check Stock

Geekworm UNO R3 Case | Protective Enclosure ABS Computer Box for Arduino UNO R3/UNO WiFi REV2/UNO REV3- Transparent

  • This Geekworm design ABS tranparent case is perfect compatible with Arduino UNO R3 development board, UNO WiFi REV2 or UNO REV3. (Arduino UNO Case).
  • Case Size: 7.5cm x 6cm x 2cm (2.95inch x 2.36inch x 0.78inch).
  • It is design with two nice "+" holes and 10 "-" holes for cooling system..
  • It is very easy to install and Mini & attractive body to carry everywhere..
  • Note: The UNO R3 board is not included in the packing list..
  • Packing List: 1x UNO R3 ABS Case-Transparent.
Check Stock

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • ! ! ! Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact us..
Check Stock

Botletics SIM7000 LTE CAT-M1 NB-IoT Cellular + GPS + Antenna Shield Kit for Arduino (SIM7000A)

  • Operates on LTE CAT-M1 and/or NB-IoT technology + GPS + temperature sensor.
  • Directly compatible with Arduino Uno, Mega, and Leonardo + easy connection for other logic voltages.
  • Ultra low-power mode drawing < 8uA, ideal for battery-powered IoT devices + LiPo battery charging.
  • Kit includes dual flexible LTE/GPS antenna and stacking female header kit.
  • Detailed documentation, wiki, Arduino library, and code examples on Github + community forum to ask questions.
Check Stock

Gikfun DS18B20 Waterproof Digital Temperature Sensor with Adapter Module for Arduino (Pack of 3 Sets) EK1183

  • SMART HOME LEARNING KIT--This kit combines the most common electronic components of smart home projects,developed specially for those beginners who are interested in Arduino and raspberry pi DIY..
  • THE PROFESSIONAL SMART HOME KIT--This has 16 sensors modules and delicately selected sensors to detect temperature, humidity, sound, light, infrared, motion, flame,vibration,digital touch, air pressure and many other commonly-used sensors modules..
  • THE MOST COMPLETE SMART HOME KIT--This universal kit are compatible for Arduino UNO R3 / Mega2560 / Mega328 /Nano / Raspberry Pi, it could DIY 16 projects according to your need..
  • HIGH QUALITY GUARANTEE--We eliminate many old-fashioned sensors which have low reliability and duplicate function as other sensor in the kit, the kookye modules sensor kits are choosed carefully for our user..
Check Stock

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock

Treedix Mini Pocket AVR Programmer Reset Reprogrammed Module Bootloader BootRescure Compatible with Arduino Controller Board

  • Development board production tool, no other equipment or compiler necessary, Abnormal status recovery bootloader, DIY development board writing bootloader..
  • Used to reprogram the Arduino BootLoader to the microcontroller chip..
  • Easy to program through the ICSP (In-Circuit Serial Programming) interface. Just directly plug it onto the ICSP interface to complete the bootloader..
  • This module can be connected to the ICSP interface, which is the 6 pin headers terminal on the Arduino controller board, which match 5V, MISO, MOSI, SCK, GND and RESET..
  • Compatible with Arduino UNO/UNO Wifi/Nano/Ethernet/Pro/Pro mini/Duemilanove/Diecimila/Mega/Mega 2560/Mega ADK/Leonardo..
Check Stock