ReviewsArduino Uno Pin Spacing

Arduino Uno 3 Ultimate Starter Kit Includes 12 Circuit Learning Guide

  • This is the ultimate Arduino Uno kit enough to get you started with hundreds of arduino projects.
  • Bread Board — Holder — Jumper Wires — USB Cable — LEDs — DC Motor — Small Servo — Relay.
  • Includes a total of over 190 electronic parts and components.
Check Stock

Geekworm UNO R3 Case | Protective Enclosure ABS Computer Box for Arduino UNO R3/UNO WiFi REV2/UNO REV3- Black

  • This ABS black case is perfect compatible with Arduino UNO R3 development board, UNO WiFi REV2 or UNO REV3. (Arduino UNO Case).
  • Case Size: 7.5cm x 6cm x 2cm (2.95inch x 2.36inch x 0.78inch).
  • It is design with two nice "+" holes and 10 "-" holes for cooling....
  • It is very easy to install and Mini & attractive body to carry everywhere..
  • Note: The UNO R3 board is not included in the packing list..
Check Stock

Geekworm UNO R3 Case | Protective Enclosure ABS Computer Box for Arduino UNO R3/UNO WiFi REV2/UNO REV3- Transparent

  • This Geekworm design ABS tranparent case is perfect compatible with Arduino UNO R3 development board, UNO WiFi REV2 or UNO REV3. (Arduino UNO Case).
  • Case Size: 7.5cm x 6cm x 2cm (2.95inch x 2.36inch x 0.78inch).
  • It is design with two nice "+" holes and 10 "-" holes for cooling system..
  • It is very easy to install and Mini & attractive body to carry everywhere..
  • Note: The UNO R3 board is not included in the packing list..
  • Packing List: 1x UNO R3 ABS Case-Transparent.
Check Stock

REXQualis Super Starter Kit based on Arduino UNO R3 with Tutorial and Controller Board Compatible with Arduino IDE

  • The most economical kit comes with everything compatible with Arduino to starting programming for beginners ..
  • This is the upgraded starter kits come with a 9V 1A Power Adapter (At least $5.99 on amazon) to replace a 9V Battery , and the Lcd1602 module come with pin header(not need to be soldered by yourself)..
  • Include High Quality Base Board base on Arduino UNO R3 compatible with Arduino IED and Sensors, Servo, Motor, ULN2003 driver board, lcds, etc..
  • Free PDF Tutorial and Datasheet are available to download from our official website or you can contact our customer service..
  • All of the Components and Integrated Circuits are individually packaged and labeled, and packing in a plastic box which is bigger enough for you..
Check Stock

SparkFun RedBoard Qwiic ATMega328P compatible with Arduino board w/ Qwiic Connector and CH340C Serial-USB Converter IC Breadboardable R3 footprint microcontroller Improved reset button

  • ATmega328 microcontroller with Optiboot (UNO) Bootloader. Rev3 shield compatible..
  • Program with a USB Micro-B cable using the Arduino IDE platform: Plug in the board, select “Arduino UNO” and you’re ready to upload code.
  • Hardware peripherals you know and love: 20 Digital I/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts.
  • Broken out the SDA, SCL and IOREF pins, so it will be compatible with future shields Power over USB or through the barrel jack 7 to 15VDC.
  • The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong..
Check Stock

ELEGOO UNO Project Basic Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE

  • The cheapest and most basic electronic components kit for Arduino beginner.
  • Free PDF tutorial including project introduction and code will be provided, you can save a lot of time searching them..
  • With the newest UNO R3 development board + USB Cable and all the basic components..
  • Nice package in the box with clear listing and CD..
  • 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO, Arduino kit..
Check Stock

REXQualis Super Starter Kit Based on Arduino UNO R3 and Electronics Component Basic Kit Comes with More Than 300pcs sensors and Components

  • The most economical kit comes with everything compatible with Arduino to starting programming for beginners ..
  • Include High Quality Base Board base on Arduino UNO R3 compatible with Arduino IED and Sensors, Servo, Motor, ULN2003 driver board, lcds, etc..
  • This is the upgraded starter kits come with a 9V 1A Power Adapter (At least $5.99 on amazon) to replace a 9V Battery , and the Lcd1602 module come with pin header(not need to be soldered by yourself)..
  • REXQualis Electronics Component Basic Kit is a Highest Cost Components Kit, It comes with more than 300pcs sensors and components for fun and simple electronic projects..
  • REXQualis Electronics Component Basic Kit include a breadboard power supply, and come with a USB Power Cables, which is hard to find..
Check Stock

Makeronics Microcontroller Board and RAB 7-in-1 Breadboard Holder with USB Cable Compatible with UNO R3 Board ATmega328P and Arduino IDE

  • RAB 7-in-1 breadboard holder is suitable for Arduino Uno, Mega2560 development breadboards,for Education kit or DIY project..
  • Control using ATMEL ATMEGA328P chip(the same with Arduino UNO R3).
  • 100% compatible with the Arduino IDE and RoHS Compliant.
  • Powered via the USB cable or power it with an AC-to-DC adapter or battery to..
Check Stock

DGZZI 50pcs Blue 5mm Pitch PCB Mount Screw Terminal Block Connector for Arduino (20pcs 2 Pin + 15pcs 3 Pin + 15pcs 4 Pin)

  • Application: crystal oscillator, IC socket, DIY PCB universal board, Dupont wire, digital tube, buzzer, Arduino UNO board, PIC programming unit, AVR ATMEL programming unit, connector suite, USB TO TLL module, power module, LCD module, RS232 TO TLL module..
  • Package includes: 20 x 2 Pin Screw Terminal Block + 15 x 3 Pin Screw Terminal Block + 15 x 4 Pin Screw Terminal Block.
Check Stock

Treedix 2pcs ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter

  • The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
  • This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
  • This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
  • Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
  • We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Check Stock

Treedix ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter with Cable

  • The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
  • This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
  • This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
  • Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
  • We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Check Stock