ReviewsAsme 18 21 1

ATD 7430 1000 lbs Telescopic Transmission Jack

  • The minimum height is 37-7/8 inch and maximum height is 77-5/8 inch.
  • It has a saddle base of 8-7/8 inch x 7-1/8 inch and an expandable area of 11-1/2 inch to 21 inch.
  • Patented built in by-pass device mechanism.
  • Meets ASME/ANSI-PALD safety standards.Saddle Area Min.: 11.4 inch x 11.4 inch.
Check Stock

Esnbia Shower Kit, Shower Faucet Set（Valve Included) with 6-Inch Rain Shower Head, Single-Handle Shower Trim Kit, Matte Black

  • IMPORTANT WARNING:Not compatible with other brand valve and cartridges.The old shower valve must be removed if install this kit..
  • 6-INCH HIGH PRESSURE RAIN SHOWER HEAD: Enjoy a waterfall like shower experience, with modern excellence in performance. offer consistent powerful shower even under low water pressure, that this will bring you an high water pressure..
  • CUPC CERTIFICATION PRESSURE BALANCE VALVE : Pressure balance valve cartridge, brass valve body, the flow of cold and hot water can be adjusted through the settings on the left and right sides. Designed for use with standard 1/2" U.S. plumbing connections. Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18 ASSE 1016/ASME A112.1016/CSA B125.16..
  • ANTI-CORROSION--Multi-layer Matte Black finished, this can resist daily scratches, corrosion and tarnishing in humid shower room.The elegant, one-piece curved handles complement any decor.
  • SHOWER PACKAGE INCLUDE: shower valve with valve trim, 6 inch rain shower head, 6" shower arm.
Check Stock

ARTIPOLY 1/2\ Drive Deep Impact Socket Set, 20PCS, 6 Point Metric Sizes (10-24mm) Socket Kit with 3\ 5\ 10\ Impact Extension Bar, 3/8\ to 1/2\ Adapter&1/2\ Universal Impact Joint,CR-V Steel

  • 【Sufficient size】: metric size (mm ): 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24. 3/8” to 1/2” adapters，3” 5” 10” impact extension rods，1/2” universal impact joints..
  • 【High quality】: Made of CR-V material by heat treatment, the surface coated with black phosphate, with six point design, corrosion, rust, wear resistance..
  • 【More applications】3/8” to 1/2” socket adapter allows for different drive size use, meeting your different needs..
  • 【Using Flexible】: Universal joints and extension rods allow access to hard-to-reach fasteners and change the Angle of force, allowing rapid loosening of bolts and nuts..
  • 【Artipoly’s guarantee】: Meets or Exceeds ASME Specifications.Extended to one year warranty period, if any problems occur during the period, please feel free to contact our fault help..
Check Stock

Esnbia Shower Kit, Shower Faucet Set（Valve Included) with 6-Inch Rain Shower Head and 4-Inch Linear Shower Drain, Matte Black

  • IMPORTANT WARNING:Not compatible with other brand valve and cartridges.The old shower valve must be removed if install this kit..
  • 6-INCH HIGH PRESSURE RAIN SHOWER HEAD: Enjoy a waterfall like shower experience, with modern excellence in performance. offer consistent powerful shower even under low water pressure, that this will bring you an high water pressure..
  • CUPC CERTIFICATION PRESSURE BALANCE VALVE : Pressure balance valve cartridge, brass valve body, the flow of cold and hot water can be adjusted through the settings on the left and right sides. Designed for use with standard 1/2" U.S. plumbing connections. Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18 ASSE 1016/ASME A112.1016/CSA B125.16..
  • The square shower drain cover adopts a grid design, greatly enhances the water flow..
  • This shower drain made of 304 stainless steel, Matte black finish works with any decorating style. Brushed gold finish works with any decorating style. Our square shower drain outlet easy to unload and installation, saving you money and time. It can also be used in kitchen, balconies, garage, basement etc..
Check Stock

5/16 -18 x 1 18-8 Stainless Steel Vented Socket Head Cap Screw 5 pk.

  • Price For: Each Drive Type: Hex Socket System of Measurement: Inch Screw Industry Standards: ASME B18.3 Fastener Finish: Plain Thread Direction: Right Hand Temp. Range: 250 Degrees F Thread Dia.: 5/16" Length: 1" Basic Material: Stainless Steel Item: Vented Socket Head Cap Screw Min. Tensile Strength: 80, 000 psi Head Height: 0.313" Head Dia.: 0.469".
  • Screw Head Type: Vented Rockwell Hardness: B70 to B95 Screw Style: Socket Head Cap Screw Thread Style: Fully Threaded Material Grade: 18-8 Thread Length: 1" Vented Hole Size: 0.078" Drive Size: 1/4" Dia./Thread Size: 5/16"-18 Country of Origin (subject to change): Multiple.
Check Stock

Esnbia Shower Tub Kit, Tub and Shower Faucet Set（Valve Included) with 6-Inch Rain Shower Head and Tub Spout, Single-Handle Tub and Shower Trim Kit, Matte Black

  • IMPORTANT WARNING:Not compatible with other brand valve and cartridges.The old shower valve must be removed if install this kit..
  • CUPC CERTIFITATION PRESSURE BALANCE VALVE : Pressure balance valve cartridge, brass valve body, the flow of cold and hot water can be adjusted through the settings on the left and right sides. Designed for use with standard 1/2" U.S. plumbing connections. CUPC certification Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18 ASSE 1016/ASME A112.1016/CSA B125.16..
  • 6-INCH HIGH PRESSURE RAIN SHOWER HEAD : Enjoy a waterfall like shower experience, with modern excellence in performance.offer consistent powerful shower even under low water pressure, that this will bring you an high water pressure.
  • ANTI-CORROSION--Multi-layer Matte Black finished, this can resist daily scratches, corrosion and tarnishing in humid shower room.The elegant, one-piece curved handles and sleek spout of complements any décor.
  • TUB AND SHOWER PACKAGE INCLUDE: shower valve with valve trim, 6 inch rain shower head, 6" shower arm and tub spout with diverter..
Check Stock

Copper One-Handle Widespread Kitchen Bar Prep Faucet - Akicon - Copper

  • Premium grade 1/4 turn ceramic drip-free cartridge for long-lasting durability..
  • 10-5/8" High and 6-1/8" Long Brass Spout..
  • Max 1.8 GPM/6.8 LPM 60 PSI Compliant with CA Title 20. IAPMO/UPC/CSA Certified, ANSI/ASME A112.18.1. ADA compliant..
Check Stock

JET JHJ-12-1/2, 12-1/2-Ton Hydraulic Bottle Jack (453312)

  • Stable Platform: Heavy-duty base is electrically welded..
  • Added Safety: Complies with ANSI/ASME B30.1 and PALD-1 standards..
  • Leak-Free Performance: Precision-machined and polished cylinders..
  • Extreme Climates: Operating temperature range from -4°F to 158°F..
  • Increased Versatility: Upright, horizontal, or angled operating positions..
Check Stock

NC HAISDA Stainless Steel Corby Bolts Fasteners EDC KnifeMakers Pivot Pin Rivets DIY Knife Handle Studs Screws Pack of 10 5mm

  • 003cb003ePrice For:003c/b003e Each 003cb003eFastener Thread Direction003c/b003e: Right Hand 003cb003eMaterial003c/b003e: Low carbon steel 003cb003eMaterial Grade003c/b003e: A307B 003cb003eSystem of Measurement003c/b003e: Inch 003cb003eItem003c/b003e: Step Bolt 003cb003eFastener Thread Type003c/b003e: UNC (Coarse) 003cb003eGrade003c/b003e: A307 003cb003eHead Height003c/b003e: 0.188 in to 0.208 in 003cb003eMeets/Exceeds003c/b003e: ASME B18.5 003cb003eFastener Length003c/b003e: 3 in 003cb003eSquare Height003c/b003e: 0.188 in to 0.219 in 003cb003eHead Dia.003c/b003e: 1.219 in to 1.219 in 003cb003eDia./Thread Size003c/b003e: 3/8"-16.
  • 003cb003eFastener Finish003c/b003e: Plain 003cb003eFinish003c/b003e: Plain 003cb003eBasic Material003c/b003e: Steel 003cb003eStep Bolt Type003c/b003e: Step Bolt 003cb003eLength003c/b003e: 3" 003cb003eFastener Industry Standards003c/b003e: ASME B18.5 003cb003eSquare Width003c/b003e: 0.368 in to 0.388 in 003cb003eCountry of Origin (subject to change)003c/b003e: Multiple.
Check Stock

Kingston Brass KB3425BL Victorian Vessel Sink Faucet, Oil Rubbed Bronze

  • 18-degree joystick type control mechanism.
  • Max 1.2 GPM/4.5 LPM Water Flow Rate At 60 PSI (ASME standard).
  • Compliant with California Energy Commission Title 20.
Check Stock

Antique Copper One-Handle Widespread Kitchen Bar Faucet - Akicon - Antique Copper

  • Premium grade 1/4 turn ceramic drip-free cartridge for long-lasting durability..
  • 10-5/8" High and 6-1/8" Long Brass Spout..
  • Max 1.8 GPM/6.8 LPM 60 PSI Compliant with CA Title 20. IAPMO/UPC/CSA Certified, ANSI/ASME A112.18.1. ADA compliant..
Check Stock