ReviewsAsme Flanges

Sterling Seal 9000IR3304GR1500x24 304 Stainless Steel Spiral Wound Gasket with 304SS Inner Ring and Flexible Graphite Filler, Pressure Class 1500#, for 3\ Pipe, Yellow with Grey Stripe (Pack of 24)

  • Sterling Seal & Supply Style 9000IR - 304 Stainless Steel Spiral Wound Gaskets with 304SS Inner Ring are suitable for use with flat face and raised face flanges.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange Erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

U-Turn - 8 inch Red Rubber Flange Gasket 1/8 Thick, Full Face, Class 150#

  • 8 inch Class 150# Type E Full Face Gasket with 8 bolt holes. For use with ANSI/ASME 16.5 Flat Face Flanges..
  • SBR Red Rubber - Styrene-Butadene Rubber is an economical gasket material with excellent abrasive properties. Typpically peforms well when sealing water, waste water, and alcohols..
  • Material Technical Data - Color: Red | Durometer: 73 +/- 5 | Temperature: -20 Degrees F to 180 Degrees F | Tensile Strength 700 PSI | Elongation: 250%.
  • Dimensions - Inside Diameter: 8.62 inches | Outside Diameter: 13.5 inches | Bolt Holes: 8 | Bolt Hole Diameter: 0.88 inches | Bolt Circle: 11.75 inches.
Check Stock

Klein Tools 603-4 Screwdriver, #2 Phillips Tip with Cushion Grip Handle, Precision Machined Electrician Screwdriver, 4-Inch

  • Precision machined Phillips tip provides a more consistent geometric symmetry than conventional Phillips screwdrivers to accurately fit and torque without slippage.
  • Tip-Ident quickly identifies the screwdriver type and tip orientation and Cushion-Grip handle for greater torque and comfort.
  • Premium chrome-plated for smooth feel and corrosion resistance.
  • Internal flanges inside handle provide solid, twist-resistant blade anchor.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

Klein Tools A131-2 1/8-Inch Flat Head Screwdriver with Keystone Tip, Pocket Clip, 2-Inch Round Shank and Comfordome Handle

  • Screwdriver with tough amber, smooth Comfordome handle fits in the palm of the hand comfortably.
  • Chrome-plated shaft helps prevent corrosion.
  • Internal flanges provide solid, twist-resistant shaft anchor.
  • Nickel-chrome, precision-forged and polished blades with black tips.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

Klein Tools 670-6 Screwdriver, 3/16-Inch Cabinet Tip, Rapi-Driv with 6-Inch Shank

  • Screwdriver's crank-action handle spins screws fast with one hand.
  • Premium chrome-plated for smooth feel and corrosion resistance.
  • Interl flanges inside handle provide solid, twist-resistant blade anchor.
  • Special heat-treated shafts and precision-machined tip for exact fit.
  • Meets or exceeds applicable ASME / ANSI specifications.
  • Cushion-Grip handle for greater torque and comfort.
  • Crank-action handle spins screws fast with one hand.
  • Saves time and effort, especially on long-threaded screws in switch plates, light fixtures, etc.
Check Stock

Klein Tools A316-6 3/16-Inch Flat Head Screwdriver with Cabinet Tip, 6-Inch Round Shank and Comfordome Handle

  • Screwdriver with small-diameter shank for use in recessed holes or tight places is well-suited for electrical and telecommunications work.
  • Tough amber, smooth Comfordome handle fits in the palm of the hand comfortably.
  • Chrome-plated shaft helps prevent corrosion.
  • Internal flanges provide solid, twist-resistant shaft anchor.
  • Nickel-chrome, precision-forged and polished blades with black tips.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

Henny Penny Seat Gasket

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Klein Tools BD284 1/4-Inch Flat Head Screwdriver with Keystone Tip, 4-Inch Square Shank and Comformdome Handle

  • Screwdriver has oversized handle that is 35-percent larger than comparable screwdriver handles and delivers up to 50-Percent extra power to perform tough jobs with minimum effort.
  • Tough amber, smooth Comfordome handle fits in the palm of the hand comfortably.
  • Chrome-plated shaft helps prevent corrosion.
  • Internal flanges provide solid, twist-resistant shaft anchor.
  • Nickel-chrome, precision-forged and polished blades with black tips.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

Klein Tools A216-4 1/8-Inch Cabinet-Tip Flat Head Screwdriver with 4-Inch Round Shank and Comfordome Handle

  • Screwdriver with small-diameter shank for use in recessed holes or tight places is well-suited for electrical and telecommunications work.
  • Tough amber, smooth Comfordome handle fits in the palm of the hand comfortably.
  • Chrome-plated shaft helps prevent corrosion.
  • Internal flanges provide solid, twist-resistant shaft anchor.
  • Nickel-chrome, precision-forged and polished blades with black tips.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

Pipe Decor 1/2\ Malleable Cast Iron Floor Flange 10 Pack, Industrial Steel Grey Fits Standard Half Inch Threaded Black Pipes and Fittings,Vintage DIY Shelving, Ten Real AUTHENTIC Plumbing Flanges

  • Unleash Your Creativity and bring chic, industrial style into your home, office or any interior space with LDR pipe décor fittings and connectors.
  • choose from our large selection of standard, unique and innovative fittings to create one-of-a-kind, custom furnishings limited only by your imagination.
  • LDR Pipe Décor Fittings and Attachments are made from the highest quality materials.
  • great for all your do-it-yourself industrial pipe projects- pipe can be painted to match any project.
  • Now in A Ten-Pack to give you more value for your money and ensure you don’t run out in middle of a project, the threaded ½-inch flanges are designed to be compatible with the rest of your project parts so you can complete your creation hassle-free.
  • This Item Is an Authentic Malleable Iron Fitting for a genuine rustic look.
  • cleaning and sealing required prior to use.
  • includes comprehensive sheet detailing several methods for cleaning and sealing.
  • Flanges are designed with a standard industrial grey finish.
  • materials and threads constructed from sturdy malleable iron.
  • meets ASME and ASTM standards. Flange measures 2.75" in diameter..
Check Stock

Klein Tools 85071 Stubby Slotted and Phillips Screwdriver Set with 5/16-Inch Cabinet-Tips and #2 Phillips-Tip, 2-Piece

  • Screwdriver set includes one 5/16-Inch cabinet-tip and one #2 Phillips-tip screwdriver.
  • Screwdrivers have internal flanges inside handle to provide solid, twist-resistant blade anchor.
  • Special heat-treated shafts and precision-machined tip for exact fit.
  • Tip-Ident quickly identifies the screwdriver type and tip orientation.
  • Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock