ReviewsAsme Lap Joint Flanges

Klein Tools 605-8 1/4-Inch Cabinet Tip Screwdriver, Heavy Duty, with 8-Inch Shank

  • Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance.
  • Internal flanges inside handle provide solid, twist-resistant blade anchor.
  • Meets or exceeds applicable ASME / ANSI specifications.
  • Tip-Ident quickly identifies the screwdriver type and tip orientation.
Check Stock

Klein Tools 608-8 Mini Flathead Screwdriver, 1/8-Inch Cabinet Tip with 8-Inch Round Shank

  • Precision formed tip provides an exact fit for small screw applications.
  • Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance.
  • Internal flanges inside handle provide solid, twist-resistant blade anchor.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

Klein Tools 665 #1 Square Recess Screwdriver with 8-Inch Round Shank and Cushion Grip Handle

  • Screwdriver works on most combination head receptacle, switch and panel screws.
  • Tip-Ident color coded handle end quickly identifies the screwdriver type and tip orientation.
  • Special heat-treated, chrome plated shaft for corrosion resistance and Cushion-Grip handle for greater torque and comfort.
  • Internal flanges inside handle provide solid, twist-resistant blade anchor.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

Klein Tools A116-3 3/32-Inch Flat Head Screwdriver with Cabinet Tip, 3-Inch Round Shank and Pocket Clip

  • Screwdriver with tough amber, smooth Comfordome handle fits in the palm of the hand comfortably.
  • Chrome-plated shaft helps prevent corrosion.
  • Internal flanges provide solid, twist-resistant shaft anchor.
  • Nickel-chrome, precision-forged and polished blades with black tips.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

Klein Tools 630-5/16 Nut Driver, 5/16-Inch Tip Nut Driver with 3-Inch Hollow Shaft, Cushion Grip Handle

  • Standard length for most applications, fits over long bolts and studs.
  • Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications.
  • Internal flanges provide solid, twist-resistant shaft anchor.
  • Premium chrome plated for smooth feel and corrosion resistance.
  • Meets or exceeds applicable ASME / ANSI specifications.
  • Handle end is also color coded for easy identification.
Check Stock

Klein Tools P28 #2 Profilated Phillips Head Screwdriver with 8-Inch Round Shank and Comfordome Handle

  • Screwdriver's oversized handle is 35-percent larger than comparable screwdriver handles.
  • Delivers up to 50-Percent extra power to perform tough jobs with minimum effort.
  • Tough amber, smooth Comfordome handle fits in the palm of the hand comfortably.
  • Internal flanges provide solid, twist-resistant shaft anchor and chrome-plated shaft helps prevent corrosion.
  • Nickel-chrome, precision-forged and polished blades with black tips.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

U-Turn - 6 inch Red Rubber Flange Gasket 1/8 Thick, Full Face, Class 150#

  • 6 inch Class 150# Type E Full Face Gasket with 8 bolt holes. For use with ANSI/ASME 16.5 Flat Face Flanges..
  • SBR Red Rubber - Styrene-Butadene Rubber is an economical gasket material with excellent abrasive properties. Typpically peforms well when sealing water, waste water, and alcohols..
  • Material Technical Data - Color: Red | Durometer: 73 +/- 5 | Temperature: -20 Degrees F to 180 Degrees F | Tensile Strength 700 PSI | Elongation: 250%.
  • Dimensions - Inside Diameter: 6.62 inches | Outside Diameter: 11 inches | Bolt Holes: 8 | Bolt Hole Diameter: 0.88 inches | Bolt Circle: 9.5 inches.
Check Stock

Sterling Seal 9000IR3304GR1500x24 304 Stainless Steel Spiral Wound Gasket with 304SS Inner Ring and Flexible Graphite Filler, Pressure Class 1500#, for 3\ Pipe, Yellow with Grey Stripe (Pack of 24)

  • Sterling Seal & Supply Style 9000IR - 304 Stainless Steel Spiral Wound Gaskets with 304SS Inner Ring are suitable for use with flat face and raised face flanges.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange Erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

U-Turn - 8 inch Red Rubber Flange Gasket 1/8 Thick, Full Face, Class 150#

  • 8 inch Class 150# Type E Full Face Gasket with 8 bolt holes. For use with ANSI/ASME 16.5 Flat Face Flanges..
  • SBR Red Rubber - Styrene-Butadene Rubber is an economical gasket material with excellent abrasive properties. Typpically peforms well when sealing water, waste water, and alcohols..
  • Material Technical Data - Color: Red | Durometer: 73 +/- 5 | Temperature: -20 Degrees F to 180 Degrees F | Tensile Strength 700 PSI | Elongation: 250%.
  • Dimensions - Inside Diameter: 8.62 inches | Outside Diameter: 13.5 inches | Bolt Holes: 8 | Bolt Hole Diameter: 0.88 inches | Bolt Circle: 11.75 inches.
Check Stock

Klein Tools 603-4 Screwdriver, #2 Phillips Tip with Cushion Grip Handle, Precision Machined Electrician Screwdriver, 4-Inch

  • Precision machined Phillips tip provides a more consistent geometric symmetry than conventional Phillips screwdrivers to accurately fit and torque without slippage.
  • Tip-Ident quickly identifies the screwdriver type and tip orientation and Cushion-Grip handle for greater torque and comfort.
  • Premium chrome-plated for smooth feel and corrosion resistance.
  • Internal flanges inside handle provide solid, twist-resistant blade anchor.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

Klein Tools A131-2 1/8-Inch Flat Head Screwdriver with Keystone Tip, Pocket Clip, 2-Inch Round Shank and Comfordome Handle

  • Screwdriver with tough amber, smooth Comfordome handle fits in the palm of the hand comfortably.
  • Chrome-plated shaft helps prevent corrosion.
  • Internal flanges provide solid, twist-resistant shaft anchor.
  • Nickel-chrome, precision-forged and polished blades with black tips.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock