ReviewsAsme Threaded Flange

Sterling Seal & Supply SSS 9000IR1316GR2500X6 Spiral Wound Gasket with 316SS Inner Ring, 1\ Pipe Size x 2500# Class Flange x 316SS/Flexible Graphite (Pack of 6)

ASME B16.20 Gaskets for ASME B16.5 Flanges/Class 2500.
Centering ring accurately locates the gasket on the flange face, provides additional radial strength, and acts as a compression limiter.
Spiral winding (sealing element) consists of metal and soft filler material.
Temperature range (F) : -150 to 850 Degrees.

Check Stock

kipa RV City Water Fill Inlet Flange Brass RV Water Hookup Connector FPT 1/2 Female Thread 3 Flange White with Check Valve backflow Preventer in City Water Connection

City water connect inlet Hook Up Flange Replace for OE Part Number A01-0169LF, Use For Many Trailer Marine RV Camper Connection to city water hoses..
Specification: Connect to FPT 1/2" threaded pipe on inside, flange Female thread 3".
With check valve backflow preventer in city water hose connection & press-in dust plug as pictured.
Durable Well-Sealed water Flange Hook Up Flange is used for connection to hook to the City garden hoses..
City Water fill inlet flange, Important: If the angle of the Flange is not installed properly, It will result the Valve easily to be damaged because....

Check Stock

Sterling Seal & Supply SSS 9000.500347GR2500X6 Spiral Wound Gasket, 1/2\ Pipe, Class 2500 Flanges, 347SS Windings, Flexible Graphite for Applications with Thermal Cycling and Pressure Variations (Pack of 6)

ASME B16.20 Gaskets for ASME B16.5 Flanges / Class 2500.
Centering ring accurately locates the gasket on the flange face, provides additional radial strength, and acts as a compression limiter.
Spiral winding (sealing element) consists of metal and soft filler material.
Temperature range (F) : -320 to 850 Degrees.

Check Stock

Sterling Seal & Supply SSS 9000.500316GR150X6 Spiral Wound Gasket, 1/2\ Pipe, Class 150 Flanges, 316SS Windings, Flexible Graphite for Applications with Thermal Cycling and Pressure Variations (Pack of 6)

ASME B16.20 Gaskets for ASME B16.5 Flanges / Class 150.
Centering ring accurately locates the gasket on the flange face, provides additional radial strength, and acts as a compression limiter.
Spiral winding (sealing element) consists of metal and soft filler material.
Temperature range (F) : -150 to 842 Degrees.

Check Stock

Mueller 107-825NL ProLine Full Port Heavy Duty Ball Valve 1 in FPT 600 Wog 150 Psi WSP

600 PSI WOG/150 WSP (1/2" - 2") - -20-Degree to 300-Degree temperature range - Full port for maximum flow rate.
Packing Gland - blowout-proof stem design - PTFE seat and packing - Chrome-plated brass ball and stem.
Rust-resistant heavy-duty handle with vinyl grip - CSA Certified to ASME B16.33 (5G) - CSA Certified to ASME B16.44 (125G).
FM Approved - Fire Protection - Threaded ends comply with ANSI B1.20.1.
IAPMO Listed to cUPC - Certified to NSF 61-G - "Lead-Free" Compliant.

Check Stock

(5 Sets) 3/8-16x3\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 3/8" | Length: 3" | Thread Type: 16 tpi Coarse Thread (Standard).
Package includes ten each of bolts, hex nuts , Flat & Lock washers.

Check Stock

(5 Sets) 5/16-18x5\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard).
Package includes ten each of bolts, hex nuts , Flat & Lock washers.

Check Stock

(10 Sets) 1/4-20x2\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 3/8" | Length: 4" | Thread Type: 16 tpi Coarse Thread (Standard).
Package includes four each of bolts, hex nuts , Flat & Lock washers.

Check Stock

(10 Sets) 1/4-20x3' Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 3" | Thread Type: 20 tpi Coarse Thread (Standard).
Package includes ten each of bolts, hex nuts , Flat & Lock washers.

Check Stock

Sur-Seal, Inc. Teadit 90004304GR300 Yellow Band with Gray Stripe Spiral Wound Gasket, High Temperature (Thermal Cycling) and/or Pressure Variations, 4\ Pipe Size, 300# Class Flange, 304SS Windings with a Flexible Graphite Filler

ASME B16.20 Gaskets for ASME B16.5 Flanges/Class 300.
Centering ring accurately locates the gasket on the flange face, provides additional radial strength, and acts as a compression limiter.
Spiral winding (sealing element) consists of metal and soft filler material.
Temperature range (F) : -150 to 842 Degrees.

Check Stock

JET 2-HDT 2-Ton Manual Trolley 262020

SAFETY: Built-in bumper guards on the side plates increase safety, and extend trolley life..
VERSATILITY: Easily adjusts to wide-flange H-beams, standard I-beams, or curved track..
DURABILITY: Welded all-steel frame and powder coat finish provide maximum protection..
CERTIFICATION: Load-tested to 125% of capacity with certificate..
COMPLIANCE: Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards..

Check Stock