ReviewsAstm A860 Fittings

Spears 829 Series PVC Pipe Fitting, Coupling, Schedule 80, 1-1/4" Socket

Coupling for connecting two pipes with the same diameter in a straight run.
Socket ends for connecting to male pipes or fittings.
PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.
Maximum operating temperature of 140 degrees F.
Meets ASTM D1784 and D2467 standards for quality assurance, and certified by NSF International for potable water service.

Check Stock

NIBCO - K09825CA C4811 2 HXHXH SANITARY TEE PVC, White, 2 Inch (C48112)

Tee with three openings for connecting and branching three pipes.
Hub ends for connecting to male unthreaded pipes or fittings.
PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
Smooth interior finish for reduced friction and material buildup.
Meets specifications ASTM D2665 and D3311 for quality assurance.

Check Stock

ZVac Central Vacuum Pipe Fittings Short 5pk Short 90 Degree for Replacement Compatible for Most Central Vacuum Systems

ZVac Central Vacuum Pipe Fittings Short 5pk Short 90 Degree for Replacement Compatible for Most Central Vacuum Systems.
Durable And Inexpensive Fit 2" Inch Central Vacuum Pipe Only..
Used To Change Direction From A Fitting Hub To A Pipe In Central Vacuum Cleaners Systems Applications..
All ZVac Central Vacuum Fittings Meet ASTM 2158 Standards.

Check Stock

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

Adapter for connecting pipes or fittings of different types.
Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.

Check Stock

Spears 447 Series PVC Pipe Fitting, Cap, Schedule 40, 2' Socket

【Apply To】Cap for closing the end of 2" pipe or fitting, which outside diameter of 2.374". Socket end for connecting to unthreaded pipes or fittings..
【Material】6 pcs Heavy Duty 2 Inch PVC Pipe End Cap Fitting Made of high-quality PVC, high-impact strength, resistant to frost and corrosion, long service life..
【Easy Installation】They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
【Wide Application】Furniture-Grade Parts, suitable for indoor and outdoor use.
Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines, etc..
【Use with Confidence】Meets ASTM D2466 and D1784 standards, comply with NSF requirements..

Check Stock

FORMUFIT 3/4\ PVC Fittings, 3-Way Corner Connector, Furniture Grade, Orange (8-Pack) - for Greenhouse, PVC Pipe Furniture, Maker Projects | Fits 3/4 inch PVC Pipe - F0343WE-OR-8

EASY TO USE: The FORMUFIT PVC 3-Way Corner Fitting is the fastest and most effortless way to build structural PVC projects with 3/4" PVC pipe. With these PVC fittings (3/4 inch), you can make cubes, PVC pipe furniture, boxes, or right-angle configurations which require a corner or three-point connection. This PVC 3-Way Connector has three (3) extra-deep sockets on separate planes at 90 degrees to each other..
GENUINE FURNITURE GRADE PVC: FORMUFIT 3-Way PVC Corner fittings are 3/4" PVC fittings that are injection-molded using ultra-strong, premium furniture grade PVC resin.
a superior engineered plastic designed for outdoor use, weatherability, and can be used in direct sunlight. UV resistance maintains fitting durability and appearance through years of exposure to varying weather conditions. In addition, this 3/4" PVC elbow has an impact strength that is five times as strong as other PVC pipe connectors due to the formulated impact modifiers..
SAFE AND NON-TOXIC: FORMUFIT 3Way PVC Fitting products are approved for fluid handling in hydroponics, aquaponics, residential irrigation, and aquarium use. These 3/4" PVC pipe fittings do not contain heavy metals, off-gassing phthalates, dioxins, or calcium cobalt filler as seen in imported, imitation/look-a-lik....

Check Stock

4LIFETIMELINES 25 ft 3/16 316L Marine Grade Stainless Steel Brake Line Replacement Tubing Coil and Fitting Kit, 16 Fittings Included, Inverted Flare, SAE Thread, 0.028 inch wall thickness

[Complete Brake Line Replacement Kit] This complete stainless steel kit contains all parts necessary to replace a 3/16” brake line.
[Marine Grade] Our stainless steel brake lines are manufactured using 316L stainless steel with added molybdenum for superior corrosion proof properties.
[Extreme Strength] The included stainless steel fittings provide 2x the tensile yield strength as mild steel or brass fittings.
[16 Fittings Included] (2) 3/16 (7/16-24 Inv), (4) 3/16 (3/8-24 Inv), (2) 3/16 (M10 x 1.0 Bub), (2) 3/16 (M10 x 1.o Inv), (2) 3/16 (9/16-18 Inv), (2) 3/16 (1/2-20 Inv), (2) 3/16 (M12 x 1.0 Bub).
[Meets All Specifications] Meets all SAE J16776 and ASTM A249 specifications.
[Lifetime Warranty] All of our products are backed by our 4LifetimeLines Limited Lifetime Warranty.

Check Stock

Anderson Metals 56120-0806 Brass Pipe Fitting, Adapter, 3/8' Male Pipe x 1/2' Female Pipe

Adapter for connecting pipes or fittings of different types.
Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size..
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

IWISS Angle PEX Crimping Tools Combo Kits for 1/2\ & 3/4\ Pex Crimp Rings with Go/No-Go Gauge with PEX Pipe Cutter Suits for All US F1807 Standards Copper Rings

All-in-One PEX Piping Tool Kit: IWS-1234C PEX plumbing kit is designed to make copper crimp ring and copper sleeves connections in sizes 1/2-inch to 3/4-inch. The tool set includes PEX crimping tool(1), PEX cutter(1), 1/2’’ copper crimp ring(20), 3/4’’ copper crimp ring(10)..
Patented Copper Crimp Ring: Annealed copper crimp rings are used to secure PEX piping to F1807 Brass or PPSU fittings. Designed for longevity and durability..
PEX Crimping Tool: Dual cavity plumbing PEX crimping tool for PEX Copper Crimp Rings 1/2" & 3/4". Allows for a one-handed crimp. Angle head design is useful for working overhead and in tight areas as it easily fits between joists. .
PEX Cutter: Shear cutter tool ideal for cutting tubing for water applications. Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. Cuts through PEX tubings like butter..
Compatibility: Ideal for connecting copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands) with crimp style brass and poly PEX fittings manufactured to ASTM F1807/F877 or F2159 standards respectively (Everhot, Nibco, Watts, Apollo, etc.)..

Check Stock

Oatey 30246 PVC Regular Cement and 4-Ounce NSF Purple Primer Handy Pack

ALL-PURPOSE CEMENT AND PURPLE PRIMER HANDY PACK: Includes one 4 oz. can of all-purpose clear cement and one 4 oz. can of purple primer for PVC pipe....
REGULAR CLEAR CEMENT: Recommended for potable water, pressure pipe, conduit, and DWV applications, and it flows freely and sets up quickly at the....
INDUSTRIAL-GRADE PURPLE PRIMER: Recommended for use on CPVC/PVC pipe and fittings of all schedules and diameters, and it is for use in areas where....
AGGRESSIVE PRIMING: Formulated to remove surface dirt, grease, and grime as well as soften the pipe surface to allow for a fast, secure, and permanent....
COMPLIANCE: Both the cement and primer are certified to UL Greenguard Gold, NSF and UPC approved, exceed ASTM Standard D2564 and ASTM F 656, and....

Check Stock

ZVac Compatible Installation Kit Replacement for All Central Vacuum 88 feet of Pipe Fits Nutone, Beam, Eureka, Vacuflo, Vacumaid, Hayden, Broan, Electrolux, Honeywell, Canavac, Riccar Cyclovac & More

This central vacuum install kit has 88ft of pipe! Most all you will need for a weekend warrior! Our Central vacuum installation kit with all fittings and pipe by ZVac (Excluding the CVAC attachments and central vacuum main power unit).
Generic, Not An OEM Product, Marks and Models Mentioned For Compatibility Purposes Only.
Our central vacuum installation parts kit fits all brands and makes and models using 2" OD pipe (the standard since 1974 in The USA). Works in new and exisiting home construction ZVac Brad Compatible Replacement For Nutone, Beam, Eureka, Vacuflo, Vacumaid, HP Vacuflo, Hayden, Broan, Electrolux, Honeywell, Canavac, Riccar, Simplicity, Imperium, MD, ZVac, Cyclovac & all other brands!.
All central vacuum pipe and fittings in our installation kit are high quality to ASTM F2158 standards!.
NOTE: ZVac central vacuum install kit do NOT include glue. Any PVC glue is fine to use for our central vacuum kit. Includes all central vacuum wall plate & central vacuum pipe fittings..

Check Stock