ReviewsAstm Die Steel

Bead Roller Forming Set 9 Dies 1 Polyurethane Roll Tipping 22mm shaft CR12 not chrome plated not peel

Includes 9 steel dies and 1 polyurethane lower wheel.
Material = CR12 Steel , Hardness = 35~45HRC.
Hem edges, create offsets and flanges, form style lines, contours and channels.
Kit includes the following: Polyurethane Lower Wheel, 180 degree lower die, Inside offset die , Outside offset die , Knife edge tipping die , Lower....

Check Stock

RCBS 20515 Carbide Die Set 9MMLUGER/9x21/9x23,OD Green 9mm Luger

Carbide Die Sets consist of a Carbide Sizer Die, Seater Die, and Bullet Seater Plug.

Check Stock

Stanley Hardware S828-152 CD8820 Shrouded Hardened Steel Padlock in Silver, 50mm Width

Molybdenum Cut Resistant Steel Shackle Protects Against Sawing And Cutting Attacks.
Hardened Steel Body Protects Lock From Attacks.
Dual stainless steel ball-bearings resist pry attacks.
Commercial 6 pin cylinder with anti pick pins.
Patented Keyway Cover Protects Against Drilling.

Check Stock

86-Piece Tap and Die Set Combination Tap Die Set Metric Tungstem Steel Titanium SAE Standard for Cutting

Tap Material: High Speed Steel, Die Material: Alloy Tool Steel..
Application: Process Steel, Iron, Aluminum, Copper and other metals, widely used in thread repair and other processing..
Package Include: 1 x 1/2"-28 UNEF Tap & 1 x 1/2"-28 UNEF Round Die..

Check Stock

Neiko 00916A 45 Piece SAE Tap & Die Set, SAE Tap and Die Set, Tap Set, Rethreading Kit, Pro-Grade Large Tap and Die Set, Titanium Threading Tools, Thread Chaser Set, Tap & Die Set Standard

HEAVY DUTY TAP & DIE SET: Titanium cutting edges hold sharpness up to 20x longer than steel, making this a perfect SAE tap and die set for any project, big or small..
VERSITILE: Create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper, and stainless steel with this tap and die kit..
DURABLE STORAGE CASE: This large tap and die set standard is fully equipped in a heavy-duty molded case for easy identification, storage, and portability for all your jobs on the go..
PREMIUM MATERIAL: Our SAE thread chaser set is made of a professional grade steel, highly durable and built to last for multiple uses. This tap set is perfect car repairs, DIY projects, and much more..
COMPLETE SET INCLUDE: This rethreading kit comes with the most popular SAE taps & dies. T-handle tap wrenches, adjustable die wrench, screwdriver, and thread pitch gauge..

Check Stock

Toolly 32pcs Tap and Die Set, Metric Hardened Steel Tool Set, Essential Threading & Rethreading Tool with Storage Case Perfect for Auto and Machinery Repair

...increase your productivity and act as an important part to your work..
【Tapered Teeth Design & Versatility】Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily. Perfect for creating new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel..
【High Quality & Durable】Tap and die set adopts premium hardened steel material. The screw thread tapping tool is durable to use. The better the material the tougher the tap and die so they ensures durability and tool longevity to withstand professional uses..
【SIZE LABLED】All of them are clearly labled with size for you to find quickly, and be able to pull the right size out of the box when you need it. It is perfect for creating threads on vehicles and machinery..

Check Stock

Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box

...u can. That way you will be able to pull the right size out of the box when you need it..
Wrenches – All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more.
Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, y....

Check Stock

TEMCo TH0364 Dimple Die for 1-1/4” Actual Hole Size

Dimple Die for 1-1/4” Actual Hole Size.
Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
This dimple die set creates flared holes. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
Recommended Compression Tool: TEMCo Industrial TH0037 Knockout Punch Set or any other electricians knockout punch set..

Check Stock

Howards End

PRECISE MATING OF LOCK RING: Easy-to-use cross bolt connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die, resulting in a more precise mating of the lock ring threads to the die threads..
RELIABLE ALIGNMENT: Full size lock ring provides a more reliable alignment with no canting, and no damage to the die threads, which remain undamaged..
EASY ADJUSTMENT: Tightening or loosening the steel cross bolt screw requires only a 7/64″ Hex/Allen Key (not included)..
STANDARD FIT: The Forster Cross Bold Die Lock Rings fit standard 7/8″-14 thread dies from most manufacturers..
FOR FORSTER SEATER & SIZING DIE: Works with all Forster Products high-quality sizing and seater dies. The Forster DIE-G-10 is a direct replacement part for the lock rings on Forster sizing and seater dies..

Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....

Check Stock

uxcell C Hook Spanner Wrench Collet Chuck for 55-62mm Round Nut, with Red Non-slip Handle

✿Die Handle Wrench: This die holder wrench can be used to make and repair threads, clamping range: M22-M26 / 22mm-55mm..
✿High-Quality Material: Die stock handle wrench is made of high-quality tool steel, sturdy and durable, the surface is polished and chrome-plated, rust-resistant and corrosion-resistant..
✿Wide Range of Application: Die wrench handle can be used for surface treatment of low-carbon steel or aluminum materials, widely used in construction, car repair, DIY home decoration projects, factories, etc..
✿Package Contains: 1 x round die stock handle wrench, total length: 19.5 inch / 495mm, fixed by 5 adjustable screws..
✿About Service: We are committed to providing customers with high-quality products. If within 30 days you are not 100% satisfied with the product, such as buying the wrong size, please feel free to contact us, we will within 24 hours provide you with a satisfactory solution..

Check Stock