ReviewsAstm Machined Components

POWERTEC 71392 Trim Router Table

  • Bundle Includes: JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5" Diameter Motors and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
  • Compatibility: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.
  • Double-Sealed Ball Bearing: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.
  • Lift Shafts: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.
  • Sturdy Construction: All the machined components on the Rout-R-Lift II are CNC machined for durability.
Check Stock

Sougayilang Trolling Reel, Level Wind Fishing Reel, Conventional Reel for Salmon-3000 Right Handle

  • ...ayilang kept these fishing reels as compact as possible while still providing tons of line capacity to anglers using leadcore, heavy braid, or strong monofilament fishing line. The size 30 TSSD cast reel will hold over 280 yards mono of 25 lb. The size 40 TSSD cast reel will hold over 440 yards mono of 25 lb..
  • Tough Components – Sougayilang conventional reels have the best components for tough trolling & bottom fishing conditions. For smooth, trouble-free saltwater fishing, Sougayilang uses 3 stainless-steel ball bearings. Japanese precision machined brass main gear and a stainless-steel spool plus stainless-steel guide shaft make this conventional fishing reel powerful, durable and reliable..
  • We are confident to say that you can trust our super strong fishing reel since we are not only control the production and material selection process, but also have perfect after-sales service (refund/replacement)..
Check Stock

BIOBOR JF Diesel Fuel Additive: Highly Effective Fuel Biocide Supplement, Prevents Corrosion of Fuel Tanks, Increases Lubricity, Dual Phase Chemistry | 1 Gallon, 4-Pack, (BBJUG04US)

  • ...nd tanks (bacteria & fungi). Lubricates injectors and fuel pumps..
  • DUAL PHASE CHEMISTRY. Partitions both water and fuel phases for more effective and complete protection against microbes that cause contamination and corrosion. Prevents corrosion of fuel tanks and metal components caused by the acidic by-products of microbial growth..
  • EXTENDS FUEL FILTER LIFE. Excessive sludge accumulation, clogged fuel filters and expensive fuel polishing can shut down engines. Proactive use of a biocide prevents biomass accumulation in fuel tanks, extends fuel filter life and inhibits microbial influenced corrosion..
  • INCREASES LUBRICITY. As an added benefit, BioborJF has been proven to increase the lubricity properties of jet fuel, providing additional protection and reduced wear to fuel delivery components..
  • OEM APPROVED. Proven to restore lubricity levels, exceeding ASTM standards and protecting injectors and pumps from premature wear. (ASTM-D6079 HFRR- engine manufacturer and industry standard testing)..
Check Stock

Thorogood American Heritage 11" Square Toe Wellington Leather Work Boots for Men with Steel Safety Toe and Slip-Resistant Outsole, Size 9

  • DURABLE COMFORT - Made with full-grain leather with Trail Crazyhorse upper, Pebble Brown bottom, 3-tone decorative shaft stitching, and pull loops to make it easier to pull your boots on..
  • SAFETY TOE & SHOCK ABSORPTION - Steel safety toe protects from high impact and compression. Removable Ultimate Shock Absorption footbed provides ultra-comfort..
  • SLIP-RESISITING - Footwear is tested for ASTM F3445-21 industry criteria for slip-resisting footwear. Wyatt90 oil-resisting outsole is designed to withstand or reduce damage due to oil..
  • EH RESISTANCE - these Square Toe Wellington work boots meet ASTM F2413-18 or ASTM F2892-18 electrical hazard resistance safety standards.
  • AMERICAN MADE - Made in the USA with USA and globally sourced components.
Check Stock

JEGS Block/Head Dowel Pins | Fits GM/Chevy LS Series Engines (4.8, 5.3, 5.7, 6.0 Liter) Made in the USA | Machined from Tube Stock | 2 Per Package | Steel

  • PRECISION MACHINED and offers accurate alignment.
  • PRECISE POSITIONING PREVENTS LEAKS and keeps your engine efficient.
  • MACHINED FROM steel tube stock, not rolled sheet metal.
  • MADE IN USA with high quality components and assembly.
Check Stock

Wiha 32292 Insulated Nut Driver Set, Inch, 1000 Volt, 5 Piece

  • Ergo molded insulated cushioned grips, 1000 volt tested.
  • Each tool individually tested for insulation integrity.
  • Handle and insulation molded on for maximum durability.
  • Super hardened and tempered for long life performance.
  • Drivers precision machined for a perfect fit.
  • Insulated 1000 volt rated, 10,000 volt tested.
  • Each tool individually tested for insulation integrity, ISO quality.
  • Meet ASTM F-1505, IEC 900,VDE 0680, NFPA 70E.
Check Stock

S&S Cycle S&,S Cycle Super Stock Cylinder Head Kit

  • High port flow gives great performance now, and more later when additional upgrades are done.
  • Heads are fully assembled with springs and valves, and are available in silver or black powder-coat finish to match OEM components.
  • Compression ratios vary depending on cylinder heads chosen, pistons used and engine displacement.
  • Heads are machined for compression releases (sold separately).
  • S&S rocker boxes required when using S&S compression releases.
  • Do not include rocker arm components, intake manifold, gaskets or headbolts (requires eight long OEM length head bolts).
Check Stock

6AN Female Swivel to 3/8 Hose Barb Aluminum Fuel Line Fitting AN6 to 3/8 Barbed Push On Adapters Straight Black Anodized

  • 6 an female thread (JIC-6, 9/16"-18) swivel to 3/8 hose barb tube connector, straight.
  • Manufactured from lightweight 6061-T6 cnc machined billet aluminum alloy.
  • Tight, leak-free connections and then black anodized for durability.
  • Precision machined to exacting tolerances for trouble-free, ensure accurate thread engagement.
  • Allow for the connection of hose ends to other components like oil pumps, fuel pumps and fuel filter.
Check Stock

Grade 2 Titanium Sheet, Unpolished (Mill) Finish, ASTM B-265, ASME SB-265, 0.093' Thickness, 36' Width, 48' Length, OnlineMetals

  • Grade 2 titanium has high corrosion resistance, a high strength-to-weight ratio, and the approximate strength of 6061-T6 aluminum..
  • 0.093″ Thickness, 36″ Width, 48″ Length.
  • Titanium Grade 2 is typically used in aerospace components, automotive components, cryogenic vessels, heat exchangers, condenser tubing, and pickling baskets..
Check Stock

13 FISHING Black Betty 6061 Hardwater Inline Ice Fishing Reel

  • CNC MACHINED ALUMINUM CONSTRUCTION - The 13 Fishing Black Betty 6061 Inline Ice Reel features CNC-machined 6061 aluminum construction for unparalleled toughness and durability..
  • PISTOL/PENCIL GRIP STYLE - Its incredible frame design allows you to fish a "pistol" or "pencil" grip style without rubbing the rim of the spool..
  • 2.7:1 GEAR RATIO - Just engage the super free-spool to drop even the lightest baits deep, and use the 2.7-1 gear ratio to retrieve line at a amazing 19" per crank..
  • MULTIPLIER FLY-STYLE REEL - This multiplier fly-style reel eliminates line twist so you can delicately and naturally present small or light baits.
  • PREMIUM COMPONENTS - With an internal gear cover, smooth carbon drag, instant anti-reverse, and much more, the Black Betty 6061 Inline Ice Reel definitively gives you the most pleasant fishing experience..
Check Stock

Element Case Black Ops for iPhone 13 Pro Max - Aggressively Rugged, Tactical, and Shockproof iPhone 13 Pro Max Case with Wallet/Card Holder and Mechanical Kickstand - Black (EMT-322-252FV-01)

  • MIL-SPEC RUGGED DROPSHOCK BODY WITH CNC MACHINED COMPONENTS - Armored, impact absorbing four-layer design (CNC machined, hard anodized aircraft grade aluminum, military grade G10 fiberglass composite, polycarbonate and thermoplastic polyurethane) dissipates energy to withstand extreme impact exceeding MIL-SPEC- 810H standards.
  • REMOVABLE CARD MAGAZINE - Secure up to 3 cards within G10 & polycarbonate cage loaded into the case or remove to carry as a separate wallet.
  • MECHANICAL STEEL KICKSTAND - Retractable steel kickstand props device at 35 degree landscape viewing angle.
  • FAST TAP BUTTONS - CNC machined aluminum buttons protect iPhone controls while providing quick and easy use of volume and on/off functions.
  • SLS SCREW LOCKING SYSTEM - The ultimate degree of protection—6 stainless steel screws secure the aluminum side rails to the DropShock Body (screwdriver included).
Check Stock