ReviewsAstm Metal Casting Part

Delft Clay Casting for Gold, Silver, Copper-Based alloys, Pewter

  • ✅ The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. The process was invented by Hans Karreman, a Dutch goldsmith. Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc..
  • ✅ Castings require very little finishing work. Once you have cast your piece, the Delft Clay can be re-used. Since this is a cold-molding process, molds can be made from patterns composed of wood, wax, epoxy, plastics, and, of course, metal. Because this is a type of sand casting, it is best suited to producing castings without pronounced undercuts..
  • ✅ The Delft Clay Casting Kit includes: 4.4lbs Delft Clay, 2 - 60mm dia. Aluminum Ring Frame, and detailed instructions..
Check Stock

7 Pieces Graphite Torch Melting Casting Kit, Including 2 Graphite Crucible Stir Stick, Graphite Casting Mould 5-in-1 Graphite Casting Ingot Mould, Quartz Crucible, Cylindrical Graphite, Tong for Melt

  • Package content: this 7 pieces graphite torch melting casting kit includes 2 pieces graphite stir rod sticks, 1 piece graphite casting mould, 1 piece 5-in-1 graphite ingot mould, 1 piece quartz crucible, 1 piece cylindrical graphite and 1 piece tong, will be a convenient combination to meet your DIY needs for melting, casting or refining metal, jewelry, gold, silver and other materials.
  • Nice features: these graphite casting moulds possess many nice features, are characterized by nice thermal stability, as well as fast cooling, their nice thermal conductivity properties can shorten the casting time and save energy.
  • Dimension: crucible mould measures approx. 100 x 50 x 25 mm in outer diameter, 90 x 40 x 20 mm in inner diameter, each crucible stir rod is about 12 inches/ 30 cm long, 5-in-1 graphite casting ingot mould about 72 x 57 x 12 mm in outer diameter, quartz crucible approx. 7 cm in diameter, 2.5 cm in height, tong about 10 inch in length, cylindrical graphite measures approx. 4 cm in diameter, 4 cm in height.
  • Multipurpose: these graphite ingot moulds are widely and commonly applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and much more, also ideal for satisfying lab, test analysis and other purpose....
Check Stock

Motorhot Dual Engine Radiator Cooling Fan Assembly fit for VW Volkswagen Jetta Passat Golf Rabbit Beetle

  • Suitablen for 2012-2015 VW Volkswagen Beetle.
  • Interchange part number:VW3120100,621490,1K0121207BB9B9.
  • Quality tested to ensure trouble-free installation and performance.
  • Durably constructed metal casting and clutch plate, rubber-coated harness and plastic connector for long-lasting use.
  • Quiets noisy cooling fans with stuck fan clutches, restores fuel economy.
Check Stock

DC12-24V Electric Soldering Iron,200-400℃ Electric Soldering Iron Kit Adjustable Temperature Fast Heating DIY Kits(Blue+Yellow)

  • Engineered iron (advantages over carbon and alloy steel).
  • Continuous casting method for superior product.
Check Stock

Delft Clay Original Casting Sand Kit Gold Silver Pewter Aluminum -Set Includes Ring

  • The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. Reproduce your original models quickly with this unique Delft clay casting system. Keep the traditional techniques of sand casting alive and well with this re-usable, ultra-fine Dutch clay mix..
  • This is the Delft Clay Kit includes 4.4 lbs. of Delft Clay, a 60 mm Aluminum Ring Frame, instructional on QR Brcode...
  • The process was invented by Hans Karreman, a Dutch goldsmith. Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc..
  • Castings require very little finishing work. Once you have cast your piece, the Delft Clay can be re-used. Since this is a cold-molding process, molds can be made from patterns composed of wood, wax, epoxy, plastics, and, of course, metal. Because this is a type of sand casting, it is best suited to producing castings without pronounced undercuts..
  • - Delft Clay 4.4 lbs.- - Aluminum Ring Frame 60 mm Diameter - QR Barcode Instructional - Country of Origin: Netherlands.
Check Stock

Metal Repair Glue, Glue for Metal to Metal, Liquid Metal Glue, Heat Resistant Glue for Metal, Appliances Casting Metal Repair Paste, ab Glue for Radiator Pipe Tank Repair Metal Filler- 65 Gram

  • ⭐High heat glue:- Specifically design heat resistant epoxy sustain it properties at elevated temperature upto 150 degree celcius..
  • ⭐Wide-range of applications:- This cold welding liquid can used as metal to metal glue, casting appliance, equally applicable to other surfaces such as wood and concrete. common application as small hole repair in metal , metal to metal adhesive, liquid metal filler, radiator repair and pipe repair..
  • ⭐Instruction:- mix the 2 part epoxy metal glue equally, apply to clean surface and give it 12- 24 hours for full curing before Appling any load. for further instruction follow the instruction sheet inside the box..
  • ⭐long-lasting Bond Strength: forms a strong and stable permanent bond that should last for ages. Once cured, Metal cast iron magic repair glue forms a strong and stable permanent bond, which should be used for many years. can be shaped, tapped, filed, sanded and drilled depending on its purpose..
Check Stock

Metal Repair Glue, 2 Pack Metal Epoxy Glue Heavy Duty, High-Temperature Heat Resistant Adhesive Glue for Metal to Metal, Plastics, Stainless Steel, DIY Craft, Aluminum Alloy, Metal Tube

  • Muti-Purpose: Our metal epoxy glue is a two-part heavy-duty high-temperature epoxy adhesive with clear, fast curing that not only acts as a filler for casting defects such as iron, copper, and cracking Castings, but also can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass to repair machinery, tools, pipes, and more..
  • Easy Application: Our metal repair glue features a dual-syringe design for easy 1:1 mixing ratios. The metal repair glue is easier to use than the traditional A and B metal glue separation. Conveniently dispense equal parts two-part formulation resin and hardener to create a tough, rigid, high-strength bond. The unique syringe has a resealable cap to prevent drying out and leaks..
  • Long-lasting Bond Strength: Our heavy duty metal glue dries clear and repairs large or multi-piece projects with a permanent bond after only one application. It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs, and laminating..
  • Easy to Use: Just a few simple steps to use. When using our adhensive glue for metal to metal, u....
Check Stock

2.2lbs Delft Clay Casting Gold Silver Copper-Based alloys, Pewter

  • ✅ The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. The process was invented by Hans Karreman, a Dutch goldsmith. Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc..
  • ✅ Castings require very little finishing work. Once you have cast your piece, the Delft Clay can be re-used. Since this is a cold-molding process, molds can be made from patterns composed of wood, wax, epoxy, plastics, and, of course, metal. Because this is a type of sand casting, it is best suited to producing castings without pronounced undercuts..
Check Stock

Saltwater Fishing Jigs 5pcs Metal Jig Spoon Lure Vertical Flat Sinking Jigging Lures for Striper Snapper Bluefish Surf Fishing

  • 【Jigging Lures】This jig metal spoons lures kit includes 5 different colors of jig lures, 5PCS lures come in one plastic box..
  • 【Attractive Jigs】Metal jig lures with laser holographic painted, vivid 3D fishing eyes, feather dressed sharp treble hooks, stainless steel split rings, strong and durable..
  • 【Casting Lures】The spoon lures has solid construction, offer effortless maximum casting distance. Ideal for casting and jigging present action in both saltwater and freshwater..
  • 【Good Performance】Slim profile generates erratic action when jigged and ripped through the water, 3D lifelike eyes, entice fish to strike and the feathered treble hook seal the deal..
  • 【Application】With rust resistance coating, the jig lures ideal for saltwater and freshwater. Catch bass, bluefish, walleye, pike, catfish, trout and other fish species..
Check Stock

3M Fire Barrier Moldable Putty Pads MPP+, Red, 7 in x 7 in, 20/case

  • Pliable one-part intumescent firestop material is designed for wall openings and through penetrations.
  • Provides draft and cold smoke seal, helps reduce noise transfer.
  • Firestop tested for through penetration and membrane applications for up to 4 hours in accordance with ASTM E 814 (UL 1479).
  • Excellent adhesion to a wide range of construction materials.
  • Non-corrosive to metal, and compatible with synthetic cable jackets.
  • Applied by hand, with no mixing or tools.
Check Stock

Sauder North Avenue Dresser, L: 15.83\ x W: 42.95\ x H: 30.00\

  • Safety tested for stability to help reduce tip-over accidents..
  • Drawers feature metal runners and safety stops..
  • Two open shelves for storage of your favorite things..
  • Durable, black metal frame. This dresser meets ASTM International’s industry standard ASTM F2057-19 Safety Specification for Clothing Storage Units, which is intended to reduce hazards to children 5 and under due to tip-over of furniture.
  • This dresser meets ASTM International's industry standard ASTM F2057-19 Safety Specification for Clothing Storage Units, which is intended to reduce hazards to children 5 and under due to tip-over of furniture.
  • Assembled dimensions: L: 15.83" x W: 42.95" x H: 30.00".
Check Stock