ReviewsAstm Steel Forging Parts

Partsam 1100 lbs 1/2T Wireless Remote Control Lifting Electric Chain Hoist, Single Phase Overhead Crane Ceiling Pulley Winch Hook Mount G80 Chain with Towing Strap Sling, 10ft Lift Height (110V~120V)

  • Hook w/ G80 CHAINS - Different form those w Zinc-Plated Steel Wire on market, this hoist is equipped with G80 Mn-steel chains through heating process and This premium material features high toughness and durability and normally is used to make parts bearing heavy loads.
  • Hook & Remote Control - Hot Forging Hook: Durable hook made of steel and through hot forging technology to meet the demand on strength and hardness. The operation safety of the lower hook is ensured by 360° rotation and safety latch.
  • Wireless Remote Control: Your safety always comes first. The wireless remote control has the emergency stop button.
  • Wide Applications - Partsam power lift Electric Chain Hoist is suitable for factories, warehouses, construction, building, goods lifting, railway construction, industrial and mining enterprises and others and also Suitable for harsh indoor or outdoor environments. In addition, Extra slings we offer just to help to make your job done easier.High speed and high efficiency give you better working experience.
Check Stock

Calphalon Contemporary Cutlery, 8-inch Bread Knife, 8-inch

  • Full tang design provides better balance and superior strength. Each knife is individually balanced for efficiency and comfort..
  • Ergonomic grip handle uniquely contoured for one size fits all comfort. Handle labels make knife type identification easy..
  • Fully tapered from cutting edge to spine and from tip to heel for superior strength and greater cutting versatility. Hand-ground to a perfect, equal edge and fine satin finish..
  • High carbon, no-stain German steel sharpens more easily, maintains its edge longer, and resists rust, stains, discoloration better than ordinary stainless..
  • One piece forging of blade, bolster and tang means no parts to separate for long-lasting durability. This product carries a limited lifetime warranty..
Check Stock

Partsam 1100lbs Lift Electric Chain Hoist Single Phase Overhead Crane Garage Ceiling Pulley Winch Hook Mount G80 Chain w Pendant Control and Towing Strap Sling (1/2T 110V), 10ft Lift Height, 2 Hooks

  • Hook w/ G80 CHAINS - Different form those w Zinc-Plated Steel Wire on market, this hoist is equipped with G80 Mn-steel chains through heating process and This premium material features high toughness and durability and normally is used to make parts bearing heavy loads.
  • Hook & Remote Control - Hot Forging Hook: Durable hook made of steel and through hot forging technology to meet the demand on strength and hardness. The operation safety of the lower hook is ensured by 360° rotation and safety latch.
  • Wired Remote Control: Your safety always comes first. The wired remote control has the emergency stop button and 5Ft/1.5M long allows you to operate from a safe distance.
  • Wide Applications - Partsam power lift Electric Chain Hoist is suitable for factories, warehouses, construction, building, goods lifting, railway construction, industrial and mining enterprises and others and also Suitable for harsh indoor or outdoor environments. In addition, Extra slings we offer just to help to make your job done easier.High speed and high efficiency give you better working experience.
Check Stock

8 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife with 3 Pin Hole & an Inserting Hole Space 4 inches Cutting Edge

  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Overall 8 inches Long hand forged full tang Damascus steel blank blade.
  • 4 inches long cutting edge. Up to standard skinning and Hunting Knife.
  • 4" long Scale space with 3 Pin and an inserting holes for extra strength of scale..
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

AULAKNIV Collect Customized Full Tang Fixed Blade D2 Steel Perfect Tactical Design 12.5" Bowie Knives Tactical,Hunting,Survival,Camping Tools W/Leather Sheath

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

10.75 inches long Kukri point Blank blade, hand forged Ladder pattern Damascus steel hunting knife blade, knife making supplies, 3 Pin hole scale, 6" sharp cutting edge

  • Overall 10.75 inches Long hand forged full tang Ladder pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick Ladder pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

11 inches Long Kukri Point Dao Blank Blade, Hand Forged Twist Pattern Damascus Steel Hunting Knife Blade, 5" Finger Serrated Space with Finger Guard, 6" Sharp Cutting Edge

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

11 inches long Damascus steel tracker knife blank blade, hand forged Ladder pattern Damascus steel tracker knife, Camping knife with 4 Pin hole, 6 inches cutting edge, 4.5' scale space

  • Overall 10.75 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 5.5 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 4 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick Ladder pattern Damascus steel Tracker blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

ZONKIE 1-Speed Bicycle Chain 122 Links

  • Easy to install: chain joints for the magic buckle, easy to disassemble, easy to clean, reusable  .
  • Strong Rally: Special forging steel, repeated forging, strict control of materials to ensure the strength.
  • Smooth lubrication: surface polishing, internal oiling.
  • Accurate matching: professional equipment test spacing, professional and technical test data  .
Check Stock

Knife Making Damascus Steel Blank Blade 7 inches Long Hand Forged Skinning Knife with 3 Pin Hole & an Inserting Hole Space 2.75 inches Cutting Edge 3.5 Scale Space

  • Overall 7 inches Long hand forged full tang Damascus steel blank blade.
  • 2.5 inches long cutting edge. Up to standard Pocket skinning and compact Knife.
  • 4" long Scale space with 3 Pin and an inserting holes for extra strength of scale..
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and....
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

10 inches Long Damascus Steel Nessmuk Blade Skinning Knife, Knife Making Supplies, Hand Forged rain Drop Pattern Damascus Steel Blank Blade Hunting Knife, 5.25" Cutting Edge, 4.5" Scale Space

  • Overall 10 inches Long hand forged full tang Damascus steel blank blade.
  • 5.25 inches long cutting edge. Up to standard Nessmuk skinning and Hunting Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick rain drop pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock