ReviewsAsw 020s

SparkFun RedBoard Artemis Machine Learning Development Board Includes BLE One megabyte of Flash USB-C connector Qwiic I2C MEMS microphone Compatible with Arduino IDE Run TenserFlow models R3 footprint

The Artemis module has the FCC/IC/CE Certification 8/16/2019 (ID Number 2ASW8-ART3MIS) on the world’s first open-source, US manufactured, BLE module.
1M Flash / 384k RAM gives you plenty of room for your sketches. 48MHz / 96MHz turbo available.
Includes 24 GPIO pins - all interrupt capable. 21 PWM channels. Built in technology compatible with Bluetooth low energy 4.0 radio.
Features 10 ADC channels with 14-bit precision, 2 UARTs, 6 I2C buses, 4 SPI buses, PDM Interface.
Exposed JTAG connector for more advanced users to use the power and speed of professional tools.

A light weight, 0.8mm thick PCB, with on board LiPo-battery charging and a Qwiic connector.
Dual row of ground connections make it easy to add lots of buttons, LEDs, and anything that requires its own GND connection.
Fully compatible with the SparkFun's compatible with Arduino core and can be programmed easily under the Arduino IDE platform.
With 1MB flash and 384k RAM you'll have plenty of room for your sketches..
The Artemis module runs at 48MHz with a 96MHz turbo mode available and compatible with Bluetooth to boot. FCC/IC/CE Certified 8/16/2019 (ID Number 2ASW8-ART3MIS).

Artemis General Features: 1M Flash / 384k RAM, 48MHz / 96MHz turbo available, 6uA/MHz (operates less than 5mW at full operation), 48 GPIO - all interrupt capable, 31 PWM channels, Built in BLE radio and antenna.
Additional Artemis Features: 10 ADC channels with 14-bit precision with up to 2.67, million samples per second effective continuous, multi-slot sampling rate.
Additional Artemis Features: 2 channel differential ADC, 2 UARTs, 6 I2C buses, 6 SPI buses, 2/4/8-bit SPI bus, PDM interface, I2S Interface, Secure 'Smart Card' interface, FCC/IC/CE Certified (ID Number 2ASW8-ART3MIS).
Specific Peripherals made available on MicroMod Artemis: 1x USB dedicated for programming and debug, 1x UART with flow control, 2x I2C, 1x SPI, 1x Quad-SPI, 8x Fast GPIO, 2x Digital Pins, 2x Analog Pins, 2x PWM, 1x Differential ADC pair, Status LED, VIN Level ADC.
Additional peripherals are available but are shared on dedicated MicroMod pins. Processor board only, additional carrier board(s) will be needed to use..

FCC/IC/CE Certification 8/16/2019 (ID Number 2ASW8-ART3MIS) on the world’s first open-source, US manufactured, BLE module.
1M Flash / 384k RAM gives you plenty of room for your sketches. 48MHz / 96MHz turbo available.
Includes 21 GPIO pins - all interrupt capable. 21 PWM channels. Built in technology compatible with Bluetooth low energy 4.0 radio.
Features 8 ADC channels with 14-bit precision, 2 I2C buses, 1 SPI bus, PDM Digital Microphone.
Exposed JTAG pin holes for more advanced users to use the power and speed of professional tools.

ASW28 gliders with 2.6m wings have good performance and povide a quick and easy way to experience the thrill of RC soaring or relax with a quick flight. The fuselage has the capacity for an FPV camera and related components..
INNOVATIVE UNIBODY PLASTIC FUSELAGE: The unibody plastic airframe, strong structure and crack resistant, makes the plane good performance at altitude..
SUPER EASY TO ASSEMBLY RC GLIDER PLANE: Click & plug Wing Mounting System allows you to spend less time and effort researching and assembling aircraft..
REMOTE CONTROL GLIDER AIRPLANE PNP VERSION: One rc plane with servo, brushless motor, brushless ESC.
but no radio transmitter, no reciever, no battery, no charger. Our recommendation: 2.4G 6-CH Transmitter and receiver.
11.1V(3s) balance lipo battery charger. Customers can also purchase transmitter and receiver set by search B07J5W7KGY in Amazon..
Wingspan: 2540mm( 102"), Length: 1132mm(45"), Flying weight: 1050g.

【Specification】: 63" casing length / 71 " total length, 2* throttle cable"..
【Compatible】: Suitable for Manco 8252-1390 ASW Go Kart Go Cart.
【Easy to instal】l: The 6" longer cable can make sure it is easy to install. Also applies fit for go cart throttle cable kit with pedal, go cart throttle cable kit universal, go cart throttle cable stop, go cart throttle cable kit, go kart cable throttle, 71 inch throttle cable, 71 inch go kart cable, manco go kart throttle cable, go cart cables, manco 8252, go kart throttle cable kit, go kart throttle cable stop, long throttle cable for go kart, fuerdi throttle cable casing 63 long..
【Top Quality】：Enhanced heavy duty eyelet and casing with thicker and stronger inner wire，very strong and durable compare to other material.Also applies fit for throttle cable casing, go cart throttle cable kit, go cart throttle cable, throttle cable for go kart, universal go kart throttle cable, gokart throttle cable, go kart gas cable, go kart cable, go kart throttle, throttle cable casing, go cart brake cable..