ReviewsAttic Insulation Removal Cost

Tamarack Technologies HV1000 R38 Ductless Whole House Fan with Insulated Doors

• QUALITY AIRFLOW - Tamarack Technologies’ HV1000 Whole House Fan allows you to avoid using your AC when the outdoor air is cooler than the indoor air. The attic exhaust fan pushes hot air, indoor air pollutants, allergens, moisture and odors out through attic vents or gables while pulling cool, fresh air naturally cooling your home and improving the indoor air quality..
• SELF-SEALING DESIGN - The attic fan includes R38 insulated doors that open automatically when the fan is operating and seal shut automatically when the fan is off. The insulated door design prevents cool air from escaping your living area to the attic..
• COST-EFFICIENT - Our whole house fans for home have insulated doors that prevent heat loss through the attic during the cooler months. Installing a Tamarack Whole House Fan reduces energy consumption and saves money. Our household ventilation fans use only 10% of energy a central air conditioning system uses and reduces your energy bill..
• LONG-LASTING AND MADE IN USA - Made with durable metal material, this quiet cool whole house fan is covered by a lifetime manufacturer's warranty. The insulated door design prevents cool air from escaping your living area to the attic. This whole house attic fan operates at two speeds..

Maxx Air Professional Grade Gable Mount Power Attic Ventilator, Premium Attic Ventilation for Gable, Home, Shed, Portable Building (2500 Sq. Feet, Green)

• VENTILATOR FAN: This is a 1650 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat..
• GABLE MOUNT ATTIC FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical..
• ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction..
• EASY INSTALLATION: It cools attic up to 2,500 square feet with a 2.6-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs..
• HOME ROOF COOLING FAN: This fan helps make living areas more comfortable while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof required..

Metro Products 16'x16' Attic Dek Flooring, 8-Pack

• ...s the only storage system designed for the unfinished areas over a garage or under a roof..
• Easily Adjustable - Avoid cutting or measuring with Attic Dek. Each has five prefabricated holes for screws to be secured into the attic floor joists. They feature tapered ribs to help position between joints and vents to let insulation breathe..
• Convenient Wire Access - Don’t worry about wires, pipes, and ductwork. With this easy installation flooring system, every nook of your space is accessible. The Attic Dek also includes two notches designed to hold wiring on each side of the panels..
• Supports up to 250 LBS - Sturdy and durable, each Attic Dek tile can support up to 250 pounds. The lightweight construction of these flooring boards eliminates the risk of sagging joists and protects the integrity of your space..

Ventamatic XXDUOSTAT Adjustable Dual Thermostat/Humidistat Control for Power Attic Ventilators

• ... 60 - 120 degrees F (normal settings are 85 - 110 degrees F). Humidistat setting adjusts from 30 - 90% (normal settings are 60 - 70% depending on local humidity levels). If either setting is too low, fan will run continuously. If setting is too high, ventilation will be inadequate. It has limited lifetime warranty..
• REMOVAL OF HEAT: The Duostat allows for worry free operation during both winter and summer months by allowing the homeowner to not manually turn on and off their attic fan when needed. It removes excess heat from an attic in summer and humidity in winter and allows equalization of inside and outside attic temperatures.

Window Insulation Kit for Winter- 62 × 433 Inch Indoor 10-Window Plastic for Winterizing, Thicken Translucent Window Covering Shrink Film with Double-Side Tape to Keep Cold Out

• Window Insulation for Winter: Our window insulation kit is used for indoor insulation in winter. It can be installed on windows to prevent cold air from entering the room and warm air from flowing out of the room, saving the cost of indoor heating in winter, and it can also be used to prevent heat into the room in summer. It can also be installed on doors and skylights that are not frequently opened..
• Thickened PE Material: This window plastic for winterizing is made of thickened PE material, 75% thicker than ordinary window insulation, more durable, better insulation, tear resistance, strong wind resistance, toughness, good shrinkage, strong stretch, no deformation, waterproof, can keep indoor winter warmth and summer cool. And the wrinkles produced during installation are few, without heat shrinkage treatment..
• Insulates up to 10 Windows: The package includes 1pcs 62 × 433 Inch (5.2 × 36 Ft) plastic window covering for winter and 1 roll of 0.78 inch × 164 Ft double-sided tape, which fits 10 standard size 3 × 5 Ft windows, enough for a family for a winter. Our double-sided tape is wider, sticks better, and removes cleanly from the window frame without any adhes....

Radiant Barrier RadiantGUARD Xtreme Heavy Duty Reinforced Attic Foil Insulation 1000 sq ft | 48-inch by 250-feet Perforated Breathable Radiant Barrier Insulation Roll Reflective Roof Barrier

• Lowers utility bills year round. This commercial grade highly reflective radiant barrier attic foil BLOCKs 95% of radiant heat gain and loss & keeps your home's temperature consistent.
• DIY install by stapling to the underside of attic roof rafters with staple gun. Don't forget to also install on all vertical exterior walls in attic (gable walls) to get complete coverage between indoor attic area and outdoors..
• Industrialized strength perforated radiant barrier attic insulation is tear and puncture proof. Entire roll cuts easily with utility scissors or hack saw..
• Non-toxic, non-carcinogenic, fiber free and maintenance free and does not require any special clothing or breathing masks to install unlike spray foams and reflective radiant barrier paints.
• Class A / Class 1 (ASTM E-84) highest achievable safety fire rating therefore, meets fire and smoke requirements for most local, state and federal building codes..

Tamarack TTi HV1600 R38 Whole House Fan (2 Speeds), Insulated Quiet Cool Attic Fan with Remote and Self-Sealing Doors, Duct Free Whole House Attic Fan Improves Air Quality

• QUALITY AIRFLOW - Tamarack Technologies’ remote-controlled HV1600 Whole House Fan allows you to avoid using your AC when the outdoor air is cooler than the indoor air. The attic exhaust fan pushes hot air, indoor air pollutants, allergens, moisture and odors out through attic vents or gables while pulling cool, fresh air naturally cooling your home and improving the indoor air quality..
• SELF-SEALING DESIGN - The attic fan includes R38 insulated doors that open automatically when the fan is operating and seal shut automatically when the fan is off. The insulated door design prevents cool air from escaping your living area to the attic..
• COST-EFFICIENT - Our whole house fans for home have insulated doors that prevent heat loss through the attic during the cooler months. Installing a Tamarack Whole House Fan reduces energy consumption and saves money. Our household ventilation fans use only 10% of energy a central air conditioning system uses and reduces your energy bill..
• LONG-LASTING AND MADE IN USA - Made with durable metal material, this quiet cool whole house fan is covered by a lifetime manufacturer's warranty. Th....

Window Insulation Kit 47 x 63 Window Plastic for Winterizing Adjustable TPU with Hook Tape Suitable for Attic Fan Cover Shutter Cover Attic Vent Warm in Winter and Cool in Summer

• Window Insulation for Winter: TPU plastic for windows to keep cold out, outstanding cold resistance, non-defrmation, tear-resistant, waterproof, chemical corrosion resistance, safe and durable, It can also keep cool air in summer when using air conditioner, cool for summer and warm in winter with long service life..
• Wide Application: Indoor window insulator kit suitable for most window types, such as aluminum window frame, wrought iron grills, sliding window, casement window, bathroom/toilet window, Attic Fan Cover, Shutter Cover, Door Whole House Attic Ceiling Fan Shutter Seal Cover, Attic Vent.
• Reusable: For day to day use, just wipe with wet cloth to remove any dust. For cleaning, just remove the window film from the window and give it a good rinsing before installing it back onto the window to air dry! (Film can be replaced with mesh screen and it will be window screens.).
• Easy to install and remove: Special hook and loop design, windproof hook and loop fasteners are added to the top and sides of the curtain for reinforcement, can be well adhered to the frame..
• Adjustable TPU: TPU film size: 47 x 63 inches - If your window frame measures 47" x62"or less , then this adjustable window insulation kit will be the perfect fit! Measure your window before o....

ECO-WORTHY Solar Powered Attic Fan Solar Venting Stainless Steel Solar Roof Fan Vent

• ...he load on your air conditioning system, and cuts your cooling costs with low electric power expense..
• 【 Powerful & Built-in Battery 】- With inbuilt rechargeable lithium battery, the solar powered fan turns on as soon as the sunlight hits the solar panel, moves 11.6 cubic feet air per minute and keeps your roof, attic, or shed cool with fresh air circulation all-day..
• 【 Easy Installation 】- The solar attic fan has pre-drilled mounting holes, self-tapping screws for easy installation. It is a ready-to-use play solar fan, just take it out of the box, no extra wiring involved..
• 【 Well-Made Material 】- The material of this solar attic ventilator is stainless steel which provides longevity to the fan and prevents any rust from forming. It is the perfect solar powered exhaust fan for sheds, roof, attic, RV, boats, cabin, etc..
• 【 Friendly Service 】- This solar ventilation fan provides a 30-day quality guarantee, and if there is any quality problem within 30 days, a free return service is provided. Since some parts of the ventilating fan are spliced with adhesive, they will fall off. If you encounter this situation, please contact us as soon as possible, and we will reissue you with a better adhesive..

AA Attic Duct Insulation Cover Whole House Attic Ceiling Fan Shutter Seal Cover Attic Armour Attic Fan Cover, 37.4050.79in

HALO H99ICAT Recessed Lighting Housing for New Construction Ceiling, Insulation Contact, Air-Tite, Aluminum, 4 in.

• New construction recessed can, ideal for those who have easy access to their ceilings.
• Insulation contact rated: Designed for insulated ceilings where contact is necessary.
• Air-Tite rated design meets restricted air flow code requirements which prevents airflow between attic and living areas and saves on both heating and air conditioning cost.
• Listed for damp location when used with dedicated wet rated recessed lights.
• Compatible with a wide variety of 4 inch LED retrofit trims, but is best with HALO quality RL, RA, SLD, LT, SMD, and ML series models (Bulb free with some having a 45 year LED lifespan).
• Compatible with a wide variety of 4 inch recessed light trims, but is best with HALO 999, 998, 993, 992, 990, 953, and 951 series models.
• Got-Nail: Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams.
• Pass-N-Thru bar hangers: Fixture has pre-installed nails that easily installs in regular lumber, engineered lumber, and laminated beams.
• Slide-N-Side Junction Box: connectors allow non-metallic sheathed cable for both U.S. and Canada to be installed without tools.
• Three "Quick Connect" connectors eliminate the need for separate wire nuts - simply strip supply wires and push in.