ReviewsAttwood Automatic Bilge Pumps

attwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump

800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
The easiest, most reliable automatic bilge pump ever designed.
The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
Includes straight outlet and check valve.

Check Stock

Whale BE9003 Electric Field Sensor Switch, 12V or 24V, Suitable for Up to 20 Amps

Precision switch automatically activates and shuts off bilge pumps when water reaches specific levels.
Worry-free, precise operation ensures proper bilge pumping and provides peace of mind.
Automatically activates bilge pump when 2 inches of water is sensed.
Turns pump off when water level drops below ½ inch.
Two color-coded wires make installation easy.
Two test circles can be used to ensure activation.
Offers side or base mounting, can operate with 12V or 24V power, and it is suitable for up to 20 amps.

Check Stock

Rule 3003.7351 Bilge Pump Motor Cartridge 700 GPH

Fits Rule Cartridge and Bilge Live well/Aerator pumps.
Fuse Protection: 5A (fuses sold separately).
Works with Pro-Series Live well pumps (now discontinued).

Check Stock

Rule Marine Tournament Series Livewell Pump 800 GPH

Fits Rule Cartridge and Bilge Live well/Aerator pumps.
Fuse Protection: 5A (fuses sold separately).
Works with Pro-Series Live well pumps (now discontinued).

Check Stock

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..

Check Stock

Float Switch for Sump Pump - 6-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
ADJUSTABLE TETHER of its 6-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..

Check Stock

Float Switch for Sump Pump - 10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
ADJUSTABLE TETHER of its 10-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..

Check Stock

LINGVUM Bilge Pump for Kayak Canoe and Boat - 17 Inch Manual Portable Kayak Hand Water Pumps with Reversible Hose Orange

CONVENIENT BILGE MANUAL WATER PUMP --- Our manual bilge pump length is 16.5", the maximum unfolded length is 25.5", equipped with a 23.2"long hose. At the same time, Our bilge pump has two water inlets and a long hose that attaches to either end, removing water quickly and reducing your fatigue.
MAKES WATER REMOVAL EASIER --- The maximum displacement is 0.4L each time. The premium rubber seal creates a watertight seal that won't come loose or leak allowing for the maximum amount of suction and discharge that performs better than other hand bilge pumps. Suction spacers can allow water to flow into the manual water pump at the fastest speed.
SCENE TO BE USED --- Perfect for emergency water removal in boats, kayaks, canoes or dinghies. With our kayak bilge pump, rest easy knowing that you’ll have a quick and easy way of removing water in those difficult times. Spending time on the water is supposed to be fun! Perfect boating and kayaking accessory.
LIGHTWEIGHT & PORTABLE --- This kayak hand pump is light (Only 0.78 pounds), easy to carry and store. Foam padded handgrip is non-slip and provides buoyanc....

Check Stock

Hand Bilge Pump Manual Hand Water Pump for Kayaks Canoes and Boats Emergency Hand-Operated Marine Bilge Pump with Reversible Hose

⛵HAND BILGE PUMP FOR BOATS: Our manual bilge pump length is 17", and the maximum unfolded length is 28.3", which is easy to store and takes up minimal space. It’s the perfect boating accessory for kayaks, canoes, dinghys and small boats. Our bilge pump remove water quickly and downward strokes for maximum efficiency and less fatigue.
⛵MAKES WATER REMOVAL EASIER & FASTER: Our hand water pump features a 34.6" long hose with a 1.16" intake nozzle and 1.37" diameter hose that makes reaching the bottom of your boat easier and removing excess water faster. This hand suction pump works great to remove water from the bottom of a motorboat, canoe or dinghy.
⛵EASY TO USE: Just simply connect the hose to the end of the pump, insert the bottom of the pump into the water, and use the handle to start pumping. It sucks water when you push the handle in, and disperses the water when you pull the handle out!.
⛵NO CLOG FILTER & ANTI-LEAK DESIGN GASKET: Our marine bilge pump Features a filtered nozzle to prevent seaweed, leaves and debris from clogging this hand water pump. And The premium rubber sea....

Check Stock

Trac Outdoors Automatic Bilge Pump, 600 GPH, 3/4" Outlet - Designed for Easy Installation and Retrofitting - Ideal for All Watercraft (69310)

Internal integrated float switch for AUTO ON/OFF functionality.
Pump body accepts both 3/4” and 1-1/8” screw-on outlets to allow ease of installation.
Each outlet has an O-ring for easy maneuverability without stripping.
Universal strainer base is connection compatible: fits Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps.
screw mounting holes match Rule and Attwood Tsunami.
Strainer base also includes side mounting option for tight spaces.

Check Stock

Seachoice 3-Position Toggle Switch On/Off/On

Suitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and more.

Check Stock