ReviewsAttwood Trailer Light Inline Circuit Testers

ALL-TEST PRO Motor Genie Deenergized Motor Circuit Analysis Testing Instrument

  • Accurate measurement: In order to improve the accuracy of voltage measurement,Battery capacity testers circuit is specially designed for DC bias. When the terminal is not connected at all, it will display a small voltage, which does not affect the actual measurement.
  • Size:Discharge testers board size is 5x3.4 cm/1.97x1.34 inch, small, easy to carry and store.
  • Power supply voltage:Battery capacity meters power supply voltage: DC4.5-6V (micro USB interface), working current: less than 70mA. Supported current: no more than 3.000A resolution 0.001A.
  • Discharge voltage:Battery meter testers discharge voltage: 1.00V-15.00V, resolution 0.01V. Termination voltage range: 0.5-11.0V.
  • Battery capacity:Battery meters battery capacity range: 9999Ah (1Ah=1000mAh). When the value is large, it is switched by the decimal point shift. When it is lower than 10Ah, it is displayed as X.XXX, and when it reaches 10Ah, it is displayed as XX.XX..
Check Stock

Partsam 6" Rectangular LED Combination Tail Lights Kit Red, 12V LED Submersible Sealed Rectangular Boat Trailer Stop Turn Tail License Plate Brake Running Light Kit w/25ft Wiring Harness 4Pin+Bracket

  • Partsam LED Trailer Light Kits: package includes 2Pcs LED Combination Trailer Tail Lights, 25 feet wiring harness with a standard 4-way flat connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide.
  • NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit.
  • Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only).
  • Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications.
  • Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for ....
Check Stock

Bussmann CBC-30B Circuit Breaker (Type I Heavy Duty Automotive with Stud Terminals and Bracket - 30 A), 1 Pack

  • WHAT YOU GET: 2 pcs car audio inline circuit breaker with manual reset fuse holder & 4pcs AWG 4-3/8 copper terminal.
  • Package Size: 9.4inch (L) x 6.3inch (W) x 0.4inch (H).
  • SAFE PROTECTION: 150A inline circuit breaker has two modes: current overload disconnection and manual disconnection. The resettable fuse can prevent surges from damaging your amplifier and protect your trolling motor from electrical damage..
  • WATERPROOF & DURABLE: 12V-24V inline circuit breaker is made with high-quality plastic and metal parts. It has good electrical conductivity, temperature, and pressure resistance, and can be waterproof and dustproof. Can be installed on the panel or firewall, and the fuse can be replaced..
  • WIDE APPLICATION: DC inline circuit breaker is usually used in auxiliary and accessory circuits for car audio and video systems, trucks, buses, RVs, ATV Winches, and marine applications. Also used in battery charges and DC sound amplifier system..
  • MOST SATISFACTORY SERVICE: If there is something about our product that makes you unsatisfied, please communicate with us in time, we will do our best to solve your problem until you are satisfied. Thank you for your understanding..
Check Stock

Carrep Submersible Square LED Trailer Lights Kit Waterproof 12V Utility Red LED Stop Turn Tail License Brake Running Light Lamp Under 80' Boat Trailer DOT Compliant

  • Widely Application + DOT Certification⭐ Designed for Trucks, trailers under 80", tractors, semi-trailer, Dump Truck, bus, boat, special vehicle,etc. The LED trailer tail Lights Serves 7 functions: Stop/Turn/Tail/Rear reflector/side reflector/side marker light/ license plate light..
  • All-in-one Kit⭐Trailer tail light kits has everything you need, with 1 Pairs trailer Lights + 2 gaskets + 2 amber clearance lights + one 22 feet and one 4 feet wiring harness + 1 license plate bracket + 4 reflective sticker + some screws..
  • Completely Sealed and Waterproof⭐ No screw on the lamp shade.Submersible Led Trailer Lights's lens and housing are completely welded together, The circuit board of tail light is seal..
  • High Visibility LED⭐ All diodes are LED, NOT Any incandescent bulbs! High Brightness LED Combination tail lights last more 30-40 times than standard incandescent lights.And trailer light kit uses less energy than traditional standard incandescent lights. It saves you time and money..
  • Installation Tips⭐Lamp with license plate light on the left side, the other on the right side. For wiring routing: Please see Product Description or User manual. Gifts for dad men him..
Check Stock

attwood 14060-7 Submersible Multi-Function LED Trailer Light Kit,Silver, One Size

  • Complete kit designed for trailers under 80 inches wide to outfit your trailer with safety lights.
  • Includes: (2) 8-function stop, tail, turn lights, (1) license plate bracket, (1) wiring harness.
  • Ideal for snowmobile, camping, motorcycle, boat, and utility trailers.
  • Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards.
  • Attwood products are both compatible and reliable, engineered and built with a never-fail attitude.
Check Stock

Partsam 12V Waterproof Square LED Trailer Tail Light Kit Clear Lens Red Trailer Brake Stop Tail Turn Signal Running Lights License Kit for Camper Truck RV Boat Trailer Snowmobile Marine Under 80'

  • 4.56″ long x 3.78″ tall x 2.63″ deep.
  • trailer light kit with 2 stud mount waterproof LED tail lights, corrosion-resistant license-plate bracket, 25ft wiring harness(one 21.98 feet and one 3.93 feet wiring harness), stainless steel mounting hardware, 2pcs amber clearance lights and 4pcs reflective sticke. 2-stud mount on 2″ centers.
  • 2 Clear/Red, waterproof, stud-mounted LED trailer tail lights for less than 80″ trailers tractors truck boat snowmobile, esp. ideal for jet ski trailer lights. Square trailer light serves 7 functions: Stop light, Turn signal light, Tail light. Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator(only for LH Side/Driver Side).
  • For this Red submersible LED trailer light kit, Right light has 16 LEDs (12 face, 4 side).
  • Left/streetside light has 21 LEDs (12 face, 4 side, 5 bottom). These trailer tail lights has no screws on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. excellent tightness makes it be definitely IP67 waterproof and submersible. Of course, you can also put the clear epoxy around it for a guarantee.
  • White+ Yellow, front side works and is high brightness.
Check Stock

Partsam Submersible Under 80\ LED Trailer Light Kit,Square Stop Turn Tail RV Truck Lights w/Wire &Bracket,Red/Amber Side Fender Marker Lamps,3rd Brake ID Light Bar for Camper Truck RV Boat Snowmobile

  • Package included: this 12v led trailer lights kit has verything you need, 2Pcs square combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15 Inch Trailer 3rd brake identification light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. Provides you with great convenience to upgrade your trailer lights at once.
  • Multi Functions: Function as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar.
  • High Btightness: 15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light w/reflector-Curb side.
  • 19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator.
  • Advanced LED combination lights with better heat distribution, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather.
  • Waterproof: The square trailer lights kit is completely sealed, it mean no water can enter inside to damage the circuit board. The screws have been removed from the l....
Check Stock

Partsam Submersible Led Truck Trailer Lights Kit 12V, 2xSquare Led Trailer Light Kits+14.17' Red 3 Light 9 LED ID Light Bar+2xAmber Side Marker w/ Reflex+ 8pcs 2.5' Oval Led Marker Clearance Lights

  • Package included: this 12v led trailer lights kit has verything you need, 2Pcs square combination tail lights, 8Pcs Mini Oval side fender marker clearance lights (4Red+4Amber), 1Pc 14.17 Inch Red Clearance 3-Lamp Truck Trailer identification light bar, 2Pcs amber Clearance Lights with Reflex Lens, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. Provides you with great convenience to upgrade your trailer lights at once.
  • Multi Functions: Function as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar.
  • High Btightness: 15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light w/reflector-Curb side.
  • 19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator.
  • Advanced LED combination lights with better heat distribution, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather.
  • Waterproof: The square trailer lights kit is completely sealed, it mean no water can enter....
Check Stock

attwood Bi-Color Lightarmor LED Navigation - Pole Light Red-Green - 10\ - Boat Bi-Color Lightarmor LED Navigation - Pole Light NV6LC2-10-7 Red-Green - 10\ - Boat

  • 2 nautical mile visibility Red/green bow mount pole light incorporating Attwood newest LED technology.
  • Additional integrated White LED task light enables greater function with a narrow beam work light.
  • Easy plug in design incorporates top-quality materials and robust and sleek design.
  • Simple removal and stowaway enables a clean deck for greater access to bow or trolling motor.
  • Three-pin Connector fits Attwood light arm or plug in bases.
Check Stock

AMRA-11901-4 Attwood Battery Charger

  • Attwood's Battery Charger is compact and perfect for your bench, garage or shop use. Overcharge, short circuit and reverse polarity protection provides years of worry free use..
  • Provides 2 and 6 amp charge for 12V batteries. 6 amp charge for 6V batteries. Automatically switches to trickle charge mode after battery is fully charged. Dual rated 12 and 6 volt battery charger can be used for all of your marine, automotive, RV and sports applications..
  • LED indicator - power on. Ammeter indicates charging current.
Check Stock

Partsam 12V LED Submersible Low Profile Rectangular Trailer Lights, Waterproof LED Combination Trailer Tail Light Kit Stop Brake License Plate Turn Running Lights Sealed for Boat Trailer Lights Truck

  • FUNCTIONS& LEDS: Rectangular combination tail lights are designed to serve 7 functions on trailers over 80" wide when properly mounted: Stop, tail, turn, side marker, side reflex, rear clearance, rear reflex and Built-in license plate light on driver's-side light illuminates license plate.
  • Left light have 22 diodes which include 4 diodes for license plate light function,Right light have 18 diodes , applied for Trucks,trailers,tractors,Dump trailer,bus,Utility boat,RV,Camper cargo,etc.
  • FEATURE: Use the highest quality components for great conductivity and durability.Complies with DOT standards. Best quality GUARANTEED! Designed tough and ready to handle harsh weather and road vibratio.using welded together to ensure a permanent and water proof seal..
  • INSTALLATION: Each rectangular light size:8" Length* 3" width* 2-3/4" height,Stainless steel hardware for under and over 80" marine towing vechiles..
  • IP68 Waterproof and Submersible(We Upgraded it this Year): There is no screw on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. We have this tail light chipped in the center to prevent water to come in, thus, the water will flow into interlayer of the outer lens, but be prevented by the isolated ch....
Check Stock