ReviewsAudi Cv Boot

Stretch Assistant CV Shaft Boot Cone Tool for Universal Fitting Stretchy CV Boot Gaiters (1)

  • Made by plastic material, durable and practical to use.
  • Smooth surface, which helpful to improve the Work efficiency and save time.
  • It can protect the CV Boot Kit from the damage while it installed process.
  • Widely applies to install the stretch CV dust cover CV joint drive shaft, which is very convenient..
  • CV Boot Mounting Cone Tool for Universal Stretch CV Boots.
Check Stock

CV Boot Installation Cone Tool For Universal Stretch CV Boots 13'

  • thickness 0.11" Better quality and more durable..
  • CV Boot Mounting Cone Tool for Universal Stretch CV Boots.
  • Top Diameter: 19mm (3/4 ")(Approx.) Botton Diameter: 108mm (4-1 / 4 ")(Approx.) Height: 330mm (13 ")(Approx.).
  • Plastic Cone Tool For Fitting Stretch CV Boot CV Joint Driveshaft CAN REUSED.
Check Stock

Factory Spec, CV Joint Fast Boot Kit Front OR Rear, Inner OR Outer compatible with Honda Pioneer 500 700 1000

  • Compatibility - CV Joint Boot fit for 1999 2000 2001 2002 2003 2004 2005 Polaris Sportsman 500 2002 2003 2004 2005 Polaris Sportsman 700.
  • Quality - CV boot be made of neoprene, high tensile strength , oil resistance , resistance.
  • Function - To CV axle against damage from sand, and to solve problems such as noise and oil leakage, providing thorough ion boot for CV joint..
  • Tightness - Comes with 2 stainless steel clamps, great resistance to and rot. Blocking foreign material..
  • Tips - Please check product information carefully before placing an order.
Check Stock

Tabazy CV Joint Banding Tool with Cutter, Ear Clamp Pliers with 8pcs Single Ear CV Boot Clamps Tool Kit,

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • CV Joint Clamp Banding Tool: Made of high quality steel, use with banding straps up to 10mm (0.39in) wide, 0.6mm(0.02in) thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. (NOTE: The banding straps are not included, only ear crimp clamps shown in the picture are included. ).
  • Material of Ear Clamp: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Ear Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275" (7mm) in width &....
Check Stock

Ear Clamp Pliers with 12pcs Single Ear CV Boot Clamps Band Tool Kit, Ear Clamp Pincer, Ear-Type Clamp Crimp Hand Tool Ear Type CV Joint Axle Boot Clamp Pliers Tool for Auto ATV UTV

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275″ (7mm) in width & 0.023″ (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354″ (9mm) in width & 0.031″ (0.8mm) in thickness..
  • Material: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Function and Use: These clamps are locking secure and tight on drive & CV Axle. They are good for you to replace the car broken drive shaft CV boot clamp..
  • What You’ll Get: 1Pcs Ear Clamps Pliers, 6Pcs Small CV....
Check Stock

FEBRYTOLD 12 Pcs CV Boot Clamp 6 Pcs Small and 6 Pcs Large Stainless Steel Universal Adjustable Stainless Steel Drive Shaft CV Boot Clamp

  • 【Material】High-quality non-magnetic Stainless Steel. Solid and Durable..
  • 【Function】Use on Drive / CV Axle. They are good for you to replace the car broken drive shaft CV boot clamp..
  • 【Compatible】Adjustable Perimeter(Height): 315-415mm(9mm), 142mm-176mm(7mm)..
  • 【Installation】Good Working Condition and Easy to Install. Placement on Vehicle: Left , Right, Front and Rear..
  • 【Package】6 Pcs Small CV Boot Clamps(Height: 7mm), 6 Pcs Large CV Boot Clamps(Height: 9mm)..
Check Stock

OTC 4723 Stinger Ear-Type CV Boot Clamp Plier

  • OTC's Ear Type CV Boot Clamp Pliers are designed to crimp the ear-type CV boot clamps used on most Cars, Trucks, SUV's, Vans and off-road vehicles that use CV boots.
  • May also be used to crimp the type of clamps used on fuel and cooling system hoses.
  • Ensures even, precise crimping for a tight, leak-proof seal.
  • Using the correct tool reduces the possibility of damage to the clamp, boot, or hose.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

East Lake Axle replacement for front left cv axle Arctic Cat 550/650 / 700 Prowler 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015

  • 1, 【What Will You Get】We prepared 12Pcs small stainless steel cv boot clamps and 12Pcs large clamps for fixing cv boots in this kit!.
  • 2, 【Wide Application】Suitable for inner or outet CV joints on most cars and light commercial vehicles, 100% brand new , professional manufacturing, steel clamp is the best replacement for your old one. A perfect replacement for your car broken drive shaft CV boot clamp..
  • 3, 【Simple to Use 】There is the band that goes round the boot, and then a part of it sticks up like a upside down U and the rest of the band clips into place over the other end of the band making a full loop. You get it as tight as you can then use the pliers to pinch the U shut to tighten it the rest of the way. This would be easier with a drawing..
  • 4, 【 High Quality】The cv boot clamps are made of non-magnetic stainless steel material, which is an ideal choice for areas that get a lot of rainfall or snow because the metal is resistant to rusting and very durable..
  • 5, 【100% Satisfaction Guarantee 】 We promise to provide every customers with 100% satisfying shopping experience. If you come across any issues during use our products, please feel free to contact us by email, we will be here to help..
Check Stock

Flexx Boot FB3000 Small Shaft Universal CV Boot

  • Proprietary engineering processes ensure that all CV Drive Axles meet OE form, fit and function.
  • CV Drive Axle part numbers with an “HD” suffix are severe-duty applications and include a thermoplastic outboard boot for increased life and....
  • An axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or....
  • CV Drive Axle measurements are validated after assembly to ensure a proper fit.
  • Threads are precision rolled to ensure proper fit when axle nut is....
  • Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
Check Stock

Complete Ball Joint Lower and Upper Kit for Honda TRX500FA 2001-2016 All Balls

  • 【Universal Fit】Ideal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp plier fits most of cars..
  • 【With 20PCS CV Boot Clamp】 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It's perfect for you to replace the car broken drive shaft CV boot clamp..
  • 【High-quality Materials】The pliers are made of high-quality stainless steel as a whole, which is durable, corrosion-resistant, oil-resistant, high-temperature resistant, and has a long service life. The clamp head undergoes a quenching process for higher hardness. Equipped with an ergonomically designed non-slip insulated handle, it is practical and comfortable..
  • 【Simple & Easy To Use】Crimp the clamp and then push down on the crimp to lock into place. It's a good partner of a 1/2" extension handle or torque wrench..
  • 【Package Includes】10X Small Clamps, 10X Big Clamps & 1X Pliers Tool. The clamp and tool set can be used directly, which is convenient and worry-free..
Check Stock

Dorman 614-030 Uni-Fit C.V. Joint Boot Air Powered Installation Tool Universal Fit

  • 【Universal Fit】Ideal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp plier fits most of cars..
  • 【With 20PCS CV Boot Clamp】 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It's perfect for you to replace the car broken drive shaft CV boot clamp..
  • 【High-quality Materials】The pliers are made of high-quality stainless steel as a whole, which is durable, corrosion-resistant, oil-resistant, high-temperature resistant, and has a long service life. The clamp head undergoes a quenching process for higher hardness. Equipped with an ergonomically designed non-slip insulated handle, it is practical and comfortable..
  • 【Simple & Easy To Use】Crimp the clamp and then push down on the crimp to lock into place. It's a good partner of a 1/2" extension handle or torque wrench..
  • 【Package Includes】10X Small Clamps, 10X Big Clamps & 1X Pliers Tool. The clamp and tool set can be used directly, which is conv....
Check Stock