ReviewsAuger Reamer

RHKING Two Stage Auger Adapter Precision Durable Alloy Steel for use with Auger Drill

  • ✅ APPLICATION:The adapter allows you to use your Power drill with Auger Drill. Suitable the 3/4 inch internal diameter of the auger shaft and 7/8inch internal diameter of the auger shaft..
  • ✅ MANUFACTURE:Auger adapter are made of alloy steel with high strength, Quenching treatment, being hard chrome plated and good wearing resistance. good impact resistance and good deformation resistance..
  • ✅ SIZE:Auger adapter Overall Length: 5inch,Body Diameter: 0.71inch and 0.86inch.Bolt hole is 0.25inch hole and 0.31 inch hole. Fits drill chucks 1/2 inch and larger..
  • ✅ EASY TO USE:Three flat milled sides to fit in 1/2 inch drill chuck,flat surfaces large enough，Longer shank for the Power drill to clamp securely without slipping..
  • ✅ DIY DESIGN:If you use it for an ice auger, you can DIY make a Auger Stop plate, install it on the step of the adapter, and clamp it with the inner hole internal diameter 5/8 Shaft Collar, so as to prevent the auger from falling into the water..
Check Stock

Pellethead 2 Pack for Englander 1RPM Pellet Stove Auger Motor PU-047040 PH-CCW1- Top and Bottom Auger Motor

  • 【The PU-047040 Auger Motor Technical Specifications】★ Volts: 120 V, ★ Amps: 1.03 A, ★ Cycles: 60 Hz, ★ RPM: 1.0, ★ Direction: Counter Clockwise. ★ Wire Length: 20" with ¼" Male and Female Terminal. ➤ Package includes two CCW1 Auger Motors..
  • 【Compatibility】➤ Replacement PU-047040 Auger Feed Motor For Englander Pellet Stove 25-PDVC, 55-SHP10, 55-SHP10L, 55-TRP10.
  • 【Replacement For Part Number】Englander PU-047040.【High Quality Auger Motor】Powerful, Quiet, Energy Efficient and Long Lasting. 1 year warranty..
  • 【High-quality & Easy to install】☞The 1RPM Englander 25-PDVC auger motor is easy to install with 20 inch wire, we provide both male and female spade connectors, depending on your stoves configuration. ☞The CW1 auger motor is made of quality stainless steel, durable material that can be applied for a long time..
  • The PU-047040 auger motor is designed to fit Englander pellet stoves including models 25-PDV and 25-PDVC (two per unit), and is the stirrer motor on Englander's....
Check Stock

StrikeMaster Lite-Flite Lazer Drill Unit 8"

  • AUGER DRILL ADAPTER: Convert hand auger into a power auger with this ice auger adapter for cordless drill.
  • Must-have ice fishing accessories to break ice into ice holes.
  • CONNECTIVITY: Ideal cordless drill ice auger attachment to perfectly fit majority augers including Eskimo, Expert Pro, Arctic, Spiralen, Easy Ice, Viking, Micro and StrikeMaster augers (Mora & Lazer).
  • NON-COMPATIBLE with all other diameters, bolted joints, or augers with the threaded connection.
  • POWER DRILL COMPATIBLE: Recommended to use with cordless power drills of 18V–3Ah 40/80 Nm.
  • DURABLE STEEL CONSTRUCTION: Zinc plated high-quality carbon steel construction for robustness and corrosion resistance.
  • Lightweight ice fishing auger drill adapter for convenient handling and transport.
  • SAFE AND EASY TO HANDLE: Non-rotated rubber-coated handle adds safety, control, and protection.
  • 0.23" and 0.31" holes allow for universal utilization of ice auger drill bit and a little extension of the screw conveyor.
Check Stock

LG EAU60783827 Ice Maker Assembly, White

  • The LG Auger Motor is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • LG Auger Motor drives the auger to dispense ice.
  • The high quality LG Auger Motor replaces 2666357, EAU60783807, EAU60783808, EAU60783818, EAU60783835, EAU60783839, PS7791887.
  • Repair your appliance with confidence when you choose LG Auger Motor.
Check Stock

3/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 5/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1/2\ Expansion Reamer, Carbide Tipped, Straight Shank, 56005, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 7/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

23/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56012, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56018, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

31/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56020, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56009, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56059, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock