ReviewsAuto Drive Shaft Parts

uxcell 5/32 Inch Diameter x 1.7 Inch Length Landing Gear Steel Axle Shaft Drive Axle with Nuts for RC Airplane - 2PCS

  • FEATURES: Item Name: Landing Gear Steel Drive Shaft Drive Axle. Usage: for RC Airplane landing gear..
  • ITEM SPECIFICS: Thread Diameter: 4mm(5/32").
  • COMPATIBLE WITH: Vehicles & Remote Control, Helicopters.
  • ADVANTAGE: High strength steel material, excellent workmanship, Suitable for fixed wing model landing gear..
Check Stock

RC Car Drive Shaft Front Rear Universal Drive Shaft CVD Heavy Duty Compatible with 1/10 Traxxas Slash VXL 4x4 Platinum Ultimate/Rustler VXL 4X4/Stampede VXL 4X4/Hoss VXL 4X4 Replacement Parts (Red)

  • RC drive shaft is special designed increases the smoothness and angle of remote control car. And it can help improve the overall comprehensive performance..
  • RC metal drive shaft is widely applicable to 4X4 1/10 RC car, precise position, complete functions. And it can help better control your RC models..
  • The builtin antiseparation design reduces the failure rate, high performance. And it is a wonderful upgrade replacement for broken or old one..
  • RC front rear drive shaft is made of prefect quality metal material, and with sophisticated workmanship, which is easy to install, sturdy and has a long service life..
  • Highprecise and accuracy, perfectly matched models can replace original parts. And it is preferred by the knowledgeable model hobbists & RC enthusiasts..
Check Stock

WEISHUJI Universal Stainless Steel Centre Drive Shaft, Stainless Steel Centre Drive Shaft, Stainless Steel Drive Shaft 140-250mm for Tamiya RC4WD D90 SCX10 SCX0016 Off-Road RC Crawlers Car

  • Universal Stainless Steel Centre Drive Shaft is compatible with HSP 94180 RC 1:10 racing climbing rock crawler, Stainless Steel Drive Shaft is also compatible with Axial SCX10 Electric 4WD RC Car..
  • Universal Stainless Steel Centre Drive Shaft length range is 140mm-250mm, Stainless Steel Centre Drive Shaft Hole Size is approx 5mm/0.20inch..
  • Universal Stainless Steel Centre Drive Shaft General Diameter is approx 12mm/0.47inch..
  • Universal Stainless Steel Centre Drive Shaft Axle Body Diameter is approx 10mm/0.39inch..
  • Package of Universal Stainless Steel Centre Drive Shaft includes: 1 x Stainless Steel Centre Drive Shaft.
Check Stock

E-cowlboy Bearing & Seal Kit with Tool Fit Whirlpool W10435302 & W10447783 Washer Tub Bearing Installation & Removal Tool Complete Package (19 Pcs)

  • Great Compatibility — Works with some Whirlpool Washer / Kenmore Washer / Combo Washer / Maytag Washer (Please be sure that your washer model should match on our product description listing below).
  • Superior Quality — Advanced heavy duty steel process, durability, high precision and hardness. High quality aftermarket shaft, bearings and seals provide a much longer service life. No noises and no leaks..
  • Benefits — Comes with everything required to remove, fix and replace the old parts. Replace bearings and use the PVC seal to reseal the installation. Grease and adhesive kits to ensure parts move smoothly during and after installation..
  • Includes — Tub Bearing Shaft & Seal Kit: Drive Shaft / Spacer Tube / Tub Seal / Top Bearing / Washer / Shaft Nut / Bottom Bearing / Threadlocker / Adhesive and Grease / Tub Press Tool Kit: Top Press Nut / Top Bearing Press / Press Rod / Bottom Bearing Press / Thrust Bearing / Shaft Nut / Locking Bar / Steel Pole and PVC Tube..
  • 100% Satisfaction Guarantee — If you’re not 100% satisfied with E-cowlboy’s washer tools, simply return it for a full refund in 30 days. Support 12 months’ Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!.
Check Stock

Lubegard 60902 Automatic Transmission Fluid Protectant, 10 oz. , RED

  • Rear Drive Shaft Axle Assembly For 2004-2008 Ford F-150 RWD 4.2L 4.6L 144.7 or 144.5 Wheel base, w/10 Bolt Differential Cover.
  • Shaft Length Compressed (in): 90 3/4" | Shaft Diameter (in): 2-7/8 Inch | Measure the Length to Confirm before Order.
  • This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints..
  • Ready to install - this drive shaft arrives pre-balanced to make installation quick and simple.
  • 100% new - this drive shaft is made from all new components so there's no core charge or return hassle.
Check Stock

Accuflex Tantrum 48 INCH World Long Drive +YDS 48" .335 Shaft-R,S,X,2X,3X,4X (Stiff)

  • Accuflex Tantrum 48 Inch World Long Drive Shaft.
  • Tantrum 48 Inch Swedish/Asian/Australian Ld Shaft.
  • Original Limited Edition Accuflex Tantrum 48" World Long Drive Golf Shaft Technology.
  • Best Long Drive Shaft for the $$ - Outperforms them all.
Check Stock

High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (Black)

  • Clock movement: high torque clock movement with hook, long shaft, drive long clock hands (10 mm to 450 mm).
  • Total shaft length: 28 mm (1-1/ 10 inches), thread length: 15.4 mm (3/ 5 inches), suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel.
  • Size from the center of the hole to the tip: the hour hand is approx. 203 mm/ 8.0 inches long.
  • The minute hand is about 305 mm/ 12 inches in length.
  • Note: please check the size before buying.
  • Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork materials to make a clock by yourself.
  • Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.
Check Stock

High Torque Long Shaft Clock Movement Mechanism with 2 Different Pairs of Hands (Color Set 1, Shaft Length 9/10 Inch/ 23 mm)

  • Clock parts kit: high torque I shaft clock with metal hook, the shaft can drive long clock hands (10 mm to 450 mm), suitable for repairing, replacing or making a clock.
  • SA0856 SA1036 SA1054: Clock mechanism size: total shaft length is approx. 23 mm (9/ 10 inches), thread length is 15.4 mm (3/ 5 inches).
  • Jump second movement, suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panelSA1026 SA1035 SA1053: Clock mechanism size: total shaft length is 20 mm (4/ 5 inch), thread length is 11.7 mm (9/ 20 inch).
  • Jump second movement, suitable for 4 - 8 mm (4/ 25 - 3/ 10 inch) thickness clock panel.
  • Clock hands kit: package includes 2 pieces of minute hands and 2 pieces of hour hands, easy for installation.
  • Simple and elegant design, these replacement parts suit well to different styles of clock frame.
  • Hole center to the tip hand size: the hour hands are approx. 90 mm/ 3.5 inch and 93 mm/ 3.7 inches respectively, minute hands are approx. 120 mm/ 4.7 inches and 127 mm/ 5.0 inches, the second hand is approx. 100 mm/ 3.9 inches, second heads is approx. 7 mm/ 0.28 inches.
  • Warm note: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before purchase.
Check Stock

YOUNGTOWN 12888 High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (1 Set)

  • Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock..
  • Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions..
  • Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements..
  • Parameter: High Torque "I" Shaft,drive long clock hands (10 mm to 450 mm).
  • total shaft length is 28 mm (1-2/32 inch), thread length is 15.4 mm (39/64 inch). 9-13 mm ( 23/64 - 1/2 inch ) thickness clock panel..
  • Clock hands kit: package includes 1 minute hands and 1 hour hands, 1 second close nut, easy for installation.
  • Simple and elegant design, these replacement parts suit well to different styles of clock frame..
Check Stock

Grasshopper Mower Belt for PTO Shaft & Clutch Assembly, Designed to Specific Standards That Ensure Superior Performance and Long Life, Genuine Replacement Part, OEM 381903G

  • COMPATIBILITY INFO: Matched set of hydrostatic or PTO shaft drive belts. For use with 5" pump pulleys. Grasshopper Part Number 381903G For PTO Shaft & Clutch Assembly 616T/620T (2007-2008), 721DT/723T/727T6 (2008) For Drive Assembly 718 (2000-2005), 718K/720K (2000-2005), 721/725 (2000-2002), 721D (2000-2005). Will not fit 5.5" pump pulleys..
  • QUALITY FIRST, MONEY SECOND: We focus on providing our clients higher value for the dollars they invest with us. The service-friendly Grasshopper design makes it easy to keep your Grasshopper zero-turn mower in peak operating condition. Fewer grease points and easy access to belts and filters translate into less time spent maintaining your mower, and more time using it profitably..
  • LAWN SERVICE SATISFACTION GUARANTEED: Don't cut corners on quality. No matter what Grasshopper mower you own, with a wide range of Grasshopper lawnmower parts available, you'll easily find necessary parts to fix up your machine. You can fully rely on original Grasshopper parts that we provide to repair and extend the operating life of your machine..
  • MANUFACTURING EFFICIENCIES: At Grasshopper, we believe that being aware of environmental issues benefits not only our planet, but our customers and our business. The Grasshopper Company endea....
Check Stock

RC Car Drive Shaft, 2 Set Metal Transmission Drive Shaft Upgrade Parts Compatible with Axial SCX10 D90 1/10 Model Car(Silver Red)

  • Fine WorkmanshipThe RC drive shaft has fine workmanship make sure the longevity of the product.112mm to 150mm adjustable length..
  • Increase Control PerformanceThe RC drive shaft can enhances the control performance of your car, reliable and durable to use..
  • Compatible withThe RC drive shaft is suitable for Axial SCX10 D90 1/10 RC car model..
  • Improve PerformanceThe RC drive shaft can improving comprehensive performance for your RC model cars, which is making it more attractive..
  • Wonderful AccessoryThe RC drive shaft is high precision, which is wonderful accessory for the old or broken one, directly fitment..
Check Stock