ReviewsAuto Feed Tapping

Amazon Basics 150-Sheet Autofeed Micro-Cut Paper Shredder & Office Desk Tape Dispenser - 3-Pack

  • Product 1: Micro-cut shredder turns paper into tiny confetti-like pieces measuring 5/32 by 15/32 inches (4 by 12 mm).
  • shreds 6x smaller than standard cross-cut shredders (2,235 pieces vs. 360 pieces).
  • Product 1: Shreds up to 150 sheets (auto feed, loaded into 8.5-by-11-inch paper tray) and up to 10 sheets (fed manually) of 20-pound bond paper at a time (no need to remove staples or small paper clips).
  • Product 1: 60 minutes on / 45 minutes off (auto feed tray).
  • 10 minutes on / 45 minutes off (manual feed slot).
  • auto shut off protects the motor from overheating.
  • Product 1: 4-mode control switch (auto/on, off, reverse, forward).
  • LED indicators (feed error, bin full, door open, overload, overheat).
  • Product 2: Includes 3 black plastic tape dispensers.
  • Product 2: Weighted core and non-skid rubber base to keep dispenser in place.
  • Product 2: Less wasteful and more affordable than disposable dispensers.
  • Product 2: Accepts tape sizes 1/2 inch and 3/4 inch wide, up to 1500 inches long.
Check Stock

uxcell Metric Machine Thread Milling Tap M16 x 2 H2 Titanium Coated Ti-coated High Speed Steel 4 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

  • Thread Size: M16 x 2. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
  • The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction..
  • Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Metric Machine Thread Milling Tap M8 x 1.25 H2 Titanium Coated Ti-coated High Speed Steel 3 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

  • Thread Size: M8 x 1.25. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
  • The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction..
  • Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

SF-080 Replacement Spool,GH3000 Trimmer Spools, Auto Feed Replacement Spools,20-Foot, 0.08-Inch, Auto Feed,Compatible with Black and Decker Weed Eater LST540 LST540B SF-080-BKP String Trimmer- 7 Pack

  • SF-080 Replacement Spool-20ft 0.080 inch Replacement Spool Line,Compatible with SF-080 SF-080-BKP Auto Feed Spool Single Line Trimmer,Compatible with Black & Decker GH3000 LST540 LST540B GH3000R 7.5-Amp Electric String Trimmer..
  • SF-080 Spool-Sturdy ABS spool & durable polyamide nylon thread, flexible and long service life.Use centrifugal force and aerodynamics to reduce drag and achieve fast cutting.feed spool sf-080,LST540 trimmer,GH3000 trimmer spool replacement,sf-080 afs spool,gh3000 replacement parts.Compatible with:black and decker gh3000 replacement spool,black and decker gh3000 replacement line,080 trimmer line spool,sf-080 auto feed spool single line trimmer fits gh3000,gh3000 string,gh3000 line,gh3000 spool.
  • GH3000 Spools Compatible with: black decker string trimmer spool by the CNC machine cutting and winding, automatic line change, eases the tedious work of hand-winding spools.sf-80 spool,sf-080 replacement spool,black and decker gh3000 spool,feed spool sf-080,weed wacker string gh3000,sf-080 line,black and decker gh3000 weed eater spool,spool for gh3000,black decker gh3000 spool,replacement spool sf-080,sf-080 spool,black and decker trimmer spool sf-080,black and decker sf-080 spool..
  • Compatible with:gh3000 replacement spool,black and decke....
Check Stock

BONSEN Paper Shredder, 100-Sheet Autofeed & 10-Sheet Manual Micro Cut Shredder Heavy Duty, P-4 High Security Paper/Credit Cards/Staples/Clips Shredder with 4 Casters, 6 Gallons Wastebasket(S3110)

  • 【Auto Feed 100 Sheets & Manual 10 Sheets Shredding】 Shreds up to 100 sheets (Auto Feed Mode) and up to 10 sheets (Manual Feed Mode) of 20-pound bond paper at a time. BONSEN micro-cut paper shredder can operate simultaneously or independently..
  • 【Long Running Time & High Speed Shredding】 In auto feed mode, the machine can run continuously for nonstop 30 minutes. In manual feed mode, the machine can run continuously for nonstop 10 minutes. Shredding Speed: 71" /min. Efficient cutting speed makes your work more efficient..
  • 【Superior Security P-4 Level】 Document shredder protects your privacy perfectly! It turns sheets of paper into 5/32" x 15/32" ( 4mm x 12mm ) tiny particles, meets Superior Security P-4 Level. The manual feed mode can shred paper, credit cards, staples and clips. The auto feed mode can only shred paper..
  • 【Visible 6-Gallon Wastebasket】 6-Gallon large wastebasket capacity, no need to empty the bin frequently. 【Lockable 360° Casters】 With 360° Universal wheels, you can move the shredder for home office heavy duty freely. When you want to fix the paper shredder somewhere, just lower the brake and it can be positioned..
  • 【Safe Protection & 1-Year Warranty】 Pull out the wastebasket, office shredder will stop working ....
Check Stock

uxcell Metric Machine Thread Milling Tap M12 x 1.75 H2 Titanium Coated Ti-coated High Speed Steel 4 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

  • Thread Size: M12 x 1.75. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
  • The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction..
  • Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
  • total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock

uxcell Metric Machine Thread Milling Tap M16 x 1.5 H2 Titanium Coated Ti-coated High Speed Steel 4 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

  • Thread Size: M16 x 1.5. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
  • The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Good for processing through holes or shallow holes.
  • Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

Staples 2722147 Fully Automatic Electric Pencil Sharpener Black (51498)

  • Electric, Moderate use. Black. Medium. 4.5"L x 4.5"W x 7"H. AC Powered. Quiet operation. Auto feed and auto eject..
  • The Staples Brand Pencil Sharpener Quality Promise..
  • 4.5"L x 4.5"W x 7"H. The Staples Brand Pencil Sharpener Quality Promise..
Check Stock

uxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
  • total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock

GBC Paper Shredder Auto Feed 130 Sheet Capacity Super Cross-Cut Small Home Office Shredder Stack-and-Shred 130X 1757571 Black

  • AUTO FEED – Auto feed takes the headache out of shredding: just stack, shut and shred. Simply put a stack of up to 130 sheets into the auto feed....
  • CONVENIENT & CONFIDENTIAL – Shredder works hard to maintain your security. Super cross-cut style shreds give you P-4 Level Security..
  • AUTOMATIC JAM CLEARANCE – Smart, user-friendly Intelligent Auto+ Jam Clearance automatically reverses and re-feeds stuck papers..
  • SELF-CLEANING CUTTERS – Self-Cleaning Cutters automatically remove shreds that can cause build-up and lead to jams. Convenient Power Save auto shut....
  • FEATURES FOR MAX FUNCTIONALITY – 7-gallon pull-out waste bin with bin full indicator. Ultra-quiet shredder functions below 60dB, minimizing office....
Check Stock