ReviewsAuto Gas Spring Strut

8MILELAKE Macpherson Strut Spring Compressor

  • This Macpherson Strut Spring Compressor designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice. compress the coil spring to replace the shock absorber unit or spring.
  • For repairs on bent struts, strut tubes, and damaged pieces.
  • Using a 3/4"or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge. Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut.
  • threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression.
  • it allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.
  • The 8MILELAKE Macpherson Strut Spring Compressor constructed with forged hooks and center screw hardened for maximum strength and longevity.
  • A plastic carry case is included. easy to organize and carry the tool.
Check Stock

Monroe 172604 Quick Complete Strut Assembly

  • ...ing Plate The new bearing plate helps ensure consistent precise steering return by eliminating “memory steer ” Helps eliminate steering noises commonly associated with worn or corroded bearings Also improves overall steering smoothness (if equipped - front only).
  • Upper Spring Seat Each new spring seat is engineered to complement the ride control characteristic of the corresponding premium Monroe strut and upper strut mount The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis Also supports the vehicle’s weight and helps properly offset the spring in the strut tower.
  • Coil Spring Manufactured from high-quality U S steel each coil spring is precisely calibrated to support the vehicle’s weight and help ensure correct ride height Each spring is painted or powder-coated for excellent rust resistance.
  • Boot Kit The durable strut boot protects the strut rod and seal from dirt and debris The premium bumper prevents component damage when the suspension bottoms out.
Check Stock

JOMBULL 2pcs Spring Compressor, McPherson Strut Spring Compressor with 10.5in Range, 13/16in Socket 1/2in Drive to Compress The Coil Spring

  • 【Adjustable range】 Our McPherson strut spring compressor offers an adjustable range of 10.5 inches, a wide spring contact surface and a built-in locking pin that helps lock the spring in place for safer spring compression..
  • 【Durable】 The spring compressor, with heat-treated carbon steel construction and oxidation treatment along the threaded rod, improve the corrosion resistance of the surface, effectively extending the service life..
  • 【Convenient】 Our McPherson strut spring compressor, suitable for strut assemblies removed from vehicles, you can use a 13/16" socket to turn the spindle, compress the strut spring, safely remove the fastener nut and transfer the spring to the new strut..
  • 【Professional】 The McPherson strut spring compressor, compresses coil springs for repairing bent and damaged parts, and performs suspension maintenance on McPherson struts and springs in most small to medium-sized vehicles..
  • 【Safe storage】 Our spring compressor comes with a custom molded case, sturdy and durable, easy to store and carry..
Check Stock

SCITOO 2Pcs Macpherson Strut Spring Compressor Tool 11.5\ fit for 13/16\ Socket 1/2\ Drive

  • 【WIDE APPLICATION】 The SCITOO coil spring compressor fit for Macpherson strut coils of various sizes. Working with manual or power tool's 1/2 inch square drive or 13/16 inch hex sockets to compress the coil spring to replace the shock absorber unit or spring.
  • 11.5 inch threaded rod for maximum opening to 10.5 inch on MacPherson struts springs to install the jaws to the coil, suitable for most vehicles with MacPherson strut springs..
  • 【PRODUCT USAGE】 Common to strut assembly from vehicle to transfer old spring to new strut, to repairs on bent struts, strut tubes, and damaged pieces. Compress the strut spring coils for convenience when replacing strut assembly and springs contact and built-in detent pins lock the spring coil in place for safer operation. Lubricate threads withseize compound for prolonged life..
  • 【BUILT TO LAST】 The threaded rod is made from carbon steel and the hooks are forged steel, high-quality materials provide better compression resistance and long service lifetime. Easy to use, suitable for both professional mechanic and beginner use..
  • 【LOCKED FIRMLY】 The SCITOO threaded rod has a wide spring contact surface and a built-in positioning pin, which can lock the coil spring in place to ensure safer compression of the....
Check Stock

Maxorber 2pcs Rear Left Right Shocks Struts Absorber Compatible with 2000 BMW 323Ci 328Ci,2001-2006 BMW 325Ci 330Ci,2001-2005 BMW 325i 330i 330xi,1999-2000 BMW 323i,BMW 328i 323is 328is 343352 5988

  • Important Note: 2pcs Rear Shocks kits (without strut mount,coil spring and rubber buffer).Please Double-Check the year,make,model,trim before purchasing.. Please feel free to if you have any other concern. Position:Rear Left & Rear Right.
  • Shocks Struts ADVANTAGES: To get the best-rated shocks and struts for your car, shocks absorbers are made from strong,thick steel, reinforced with a chrome or zinc coating.Japanese Made Oil Seals,no squeaking noise,long durability..
  • Interchange/Cross Part Number: 343352 5988 1923352 G69863 31306757043, 31306757044, 31311090461, 31311090462, 31311091101, 31311091102, 31311091269, 31311091270, 31311092307, 31311092308, 31311096853, 31311096854, 31311096855, 31311096856, 31312282459, 31312282460, 31316750789, 31316750790, 31316750791, 31316750792, 31316759097, 31316759098, 31316759561, 31316759562, 33521091245, 33521091246, 33521095913, 33521096366, 33522282461, 33526750783, 33526750784, 33526757045, 33526759100 Shocks Struts.
  • Easily Installation: This is 100% tested auto shocks. The buckle holes are consistent with the original car in situ,so you can remove and replace it without take apart existing strut assembly or any other changes,quick installation..
  • Premium Qualified Finish: Rust protection.
Check Stock

C16-09209 16 inch 38 Lbs (169 N) Gas Struts Spring Shocks 15.7 inch C1609209 Lift Support for Truck Cap Leer Topper Window are Canopy Pickup Bed Truck Topper Camper Shell, Pack of 2 ARANA

  • ✅ Interchange Number:C1609209,C16-09209, SE150P40M10.
  • ✅ 16 inch 38Lb Gas Struts — Extended Length (Center-to-Center): 15.7in (399mm).
  • Compressed Length (Center-to-Center):9.4in (239mm).
  • Force: 38 Lbs (169 N) (Per Strut), 2 Struts per set, not 1.
  • ✅ C1609209 16 inch Gas Spring — ARANA C1609209 struts could be used as the replacement parts for Truck Cap Leer Topper Window ARE Canopy Pickup Bed Shock Strut are Truck Topper Camper Shell Parts Gas Springs, etc..
  • ✅ 16 inch 38lb Gas Prop Struts — Please confirm the Interchange Number of your old struts if you use the struts as the replacement, and re-check the length before purchasing to avoid buy wrongly.
  • ✅ 18 Months Support– If any questions or dissatisfaction before/after purchasing or need installing/using guide, please message ARANA directly to let us provide in-time assistance to you!.
Check Stock

C16-09209 16 Inch Gas Struts 38Lbs/169N Spring Lift Support Shocks for rear window lid cover Leer ARE ATC Camper Topper 2pcs by IAQWE Sliver

  • [GAS SPRING PARAMETER]: Force: 38Lbs/169N 15.7 Inch per Strut, a pair of 2 shocks. Extended Length: 15.7”, Compressed Length: 9.4”. Ball Joint....
  • [15.7 INCH GAS SHOCKS]: Exchange number: C1609209,C16-09209, SE150P40M10. Package include Struts* 2, Installation Guide* 1. A variety of colors are....
  • [38LBs GAS STRUTS]: Suitable for Camper Shell, Truck Topper Window, Leer ARE ATC Camper Topper, Rear Window, Truck Topper Bed and so on. Scope of....
  • [PREMIUM 15.7 INCH GAS STRUTS]: Our products are suitable for various harsh weather environments such as outdoor heavy rain and minus 104℉. As the....
  • [GAS SPRING SUPPORT]: 36 Months Replacement Support. Any issues, just mail us via Amazon, and we will solve for you within 24HRS..
Check Stock

45Lbs/200N 17 Inch Gas Struts C16-04270 Lift Support Shocks for Camper Shell Rear Window Truck Canopy Cap ARE ATC Leer Topper Window Toolbox 2pcs by IAQWE

  • [GAS SPRING PARAMETER]: Force: 45Lbs/200N 17 Inch per Strut, a pair of 2 shocks. Extended Length( hole to hole): 17”, Compressed Length( hole to....
  • [17 INCH GAS SHOCKS]: Exchange number: C16-04270, C1604270. Package include Struts* 2, Installation Guide* 1. A variety of colors are available for....
  • [45LBs GAS STRUTS]: Suitable for Camper Shell, Truck Topper Window, Leer ARE ATC Camper Topper, Rear Window, Truck Topper Bed and so on. Your DIY can....
  • [PREMIUM 17 INCH GAS STRUTS]: Our products are suitable for various harsh weather environments such as outdoor heavy rain and minus 104℉. As the....
  • [GAS SPRING SUPPORT]: 36 Months Replacement Support. Any issues, just mail us via Amazon, and we will solve for you within 24HRS..
Check Stock

DASBET 2pcs Macpherson Strut Spring Compressor(300mm) with Detent Pins

  • Compress Most Sizes Of Macpherson Strut Springs With The Oemtools Strut Spring Compressor – Quickly And Safely Compress The Spring For Easy Replacement Of The Strut Cartridge Or Strut Assembly Repair.
  • Safer Spring Compression with the Broad Spring Contact.
  • Heat-Treated Forcing Screw and Safety Latches for Locking Hook to Spring.
  • Do not use with impact driver tools. Our products are 100% brand new. If you think the item you received is used, please contact us for a replacement..
Check Stock

C16-20651 18.7 Inch 40lb/178N Gas Struts Shocks Spring Lift Support for Leer Camper Shell Topper Rear Windows Door Truck Cap Toolbox Canopy Struts Replacement Parts, Set of 2 by HUOPO

  • 【Truck Camper Shell Replacement Part】 Gas shock spring strut for leer camper shell topper rear windows door truck cap toolbox canopy cover. Please compare the interchange number and dimensions with the OEM gas spring before purchasing..
  • 【C16-20651 Gas Struts Specifications】 18.7 inch 40lb/178N Gas Struts Shocks Spring Lift Support. Extended Length 18.70 inch. Compressed Length 10.82 inch. The 18.7 inch gas struts connector is 10mm Nylon Socket type. End fitting 10mm ball stud. WARM TIPS: The 40lb gas struts is so strong that you can't compress it by hand..
  • 【18.7 Inch Shock Interchange Number】 Find the below Interchange number on your OEM gas shock cylinders for a exact match: C16-20651 SE187P40 SE187P40S10, These camper shell shocks are compatible with many truck canopy types, LEER truck cap parts, ARE truck topper parts, Snugtop replacement parts, These are the perfect OEM replacement parts..
  • 【C16-20651 Struts Package Content】Package contains 18.7 inch gas struts*2. Installation with a flat screwdriver, no special tools required..
  • 【13 Months Replacement Warranty】 HUOPO offer a 13-month replacement service. Let us know your concerns about Huopo products. Contact us via Amazon Mail. Our customer service team will respond quickly and wi....
Check Stock

C16-03795 12' 24Lbs/107N Gas Shock Struts for Leer are Camper Shell Truck Topper Rear Window, Pickup Truck Tool Box Cab Canopy Door, Set of 2 Vepagoo

  • 【PLACEMENT】12in 24lb gas shock strut fit for Leer/ARE/Snugtop camper shell rear window truck topper door pickup cab canopy and so on..
  • 【PARAMETER】Compressed Length (Center-to-Center): 8.3in, Extended Length (Center-to-Center): 12.2in, Force: 24Lbs /107 N Per Strut..
  • 【NEED KNOW】Please compare the length of your original gas spring' compression and extension, type of connector, and lift capability before purchasing..
  • 【PART NUMBER】Interchange Part Number：C1603795, C16-03795, SG459002. Easy to install, no special tools required..
  • 【12+1 MONTH REPLACEMENT SERVICE】A NEW PACKAGE will be offered if any quality defects occur. Welcome to Click "Ask Seller" Besides Your Order for In-time Assistance!.
Check Stock