ReviewsAuto Generator Bearing

Jeonestan Cold Water Only Brushed Nickel Deck Mount Sink Bar Tap,Faucet Single Handle 1 Hole 360° High Arc Swivel Spout with Hose and Longer Thread Pipe for Kitchen,Outdoor, Garden and Bar

  • ...es To Effectively Solve The Problem Of Jerky Rotation..
  • 【Integrated Thick Switch Design & Handle Is Not Loose】 We Have Upgraded The Experience Of Using The Product Handle. The Handle Uses A Thick One-Piece Casting, So The Handle Is Hard To Break And There Is No Problem Even If It Is Used For A Long Time..
  • 【Foam Generator & No Splash】 The Water Outlet Of The Kitchen Faucet Adopts A Foam Generator, And The Soft Foam Water Flow Can Prevent Water From Splashing And Weaken The Sound Of Water Flow. It Is A Very Easy-To-Use Single Faucet!.
  • 【Easy To Install & Use】 Our Products Have Reliability And Long-Lasting Performance. And The Mounting Hose Is Also Equipped With Wrench And Faucet Mounting Parts. Easy To Install. It Also Conforms To Japanese Standards, So Please Purchase With Confidence..
Check Stock

SUNGOLDPOWER 4000W 12Vdc Pure Sine Wave Inverter Low Frequency 240Vac Input to 120Vac/240Vac Output Split 50/60 Hz with Battery Charger Off-Grid 12000W Peak, Black, 4000W 12V Split

  • ...ter can be easily customized to Battery priority via a DIP switch, when you choose battery priority, the inverter will invert from battery despite the AC input. It will efficiently draw 12Vdc power from battery to power up the load with 120/240Vac.
  • 4.Auto Gen Start: The power inverter can be customized to start up a generator when the battery voltage goes low. When the inverter goes to low battery alarm, it can send a signal to start a generator, and turn the generator off after battery charging is finished.The auto gen start feature will only work with generators designed to work with this feature..
  • 5.Protections: AC input over voltage protection/AC Input low valtage protection/Low battery alarm/Hign battery alarm/Over temperature protection/Over load protection/Short circuit protection(1s after fault)/Back feeding protection.
Check Stock

T POWER Car Charger for Rockpals NinjaBatt OKPRO Freeman 300 600 Portable Power Station 200W 250W 300W & 500 Watt Solar Generator ONLY Ac Dc Adapter Power Supply

  • T-Power- For Auto Vehicle Boat RV Camper Cigarette Lighter Plug Charger. Brand-new Input Voltage Range: AC 100V - 240V - ( 12V).
  • ⚠️ ( Please Note ! that the " Portable Power Station " available in a number of different Models Number , Please Make sure Your Model or PN : Match this Listing , Thank you )))).
  • Compatible with: Rockpals 200W 250W 300W & 500 Watt Portable Generator Rechargeable Lithium Battery Pack Solar Generator Backup Battery Pack Rockpals WCE001 RP250W 250W 64800mAh 240Wh K53 350W 288Wh Portable Solar Generator , ROCKPALS Freeman 600 600W Portable Power Station ROCKPALS Freeman 300 300W Portable Power Station.
  • NinjaBatt Portable Power Station with 288Wh 280W 300W Lithium Battery NinjaBatt Model: SGR-PPS300-5 300W Portable Power Station PowerStation 26Ah / 280Wh Backup Lithium-ion Battery 300 Watts Ninja Batt AC110V/300W SGR-PPS3005 SGRPPS300-5 SGRPPS3005.
  • OKPRO Portable Power Station, 230W 550W Solar Generator, Portable Power Supply.
Check Stock

Hypertune Universal Two Jaw Pilot Bearing Gear Puller Bearing Gear Remover Tool Carbon Steel Adjustable Pump Pulley Remover Hand Tool Removal Kit Straight Type 3 38x65mm

  • 【WIDELY FITTMENT】Universal for automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing, etc..
  • 【USAGE SCENARIO】Into Tight Areas bearing gear remover can remove gears, pulleys, and flywheels off a shaft in hard-to-reach spots without damaging your application..
  • 【USEFUL DESIGN】Adjust screw design, flexible and convenient to repair different size gears and bearings..
  • 【HIGH-QUALITY MATERIAL】Made of high-quality carbon steel, durable and not easy to rust..
  • 【CAUTION】There will be lubricating oil on the surface of the product, please wear gloves before use..
Check Stock

Simply Straight Brush

  • Hair Straightener Brush with MCH Ceramic Heat & Negative Ion Generator: It is mainly for daily care with ceramic even heat technology and negative ion generator to make your hair smooth and shiny! Ionic hair straightener brush helps detangle and straighten hair instantly while leaving a healthy shiny, sleek, frizz-free hair..
  • 11 Temperature Settings Wonderful for All Hair Types: Whether you have color-treated hair, naturally curly hair, or long, thick mermaid hair, you will find this heating hair brush straightener can do the job of your blow dryer, flat iron, and round brush in one simple, easy-to-use tool!.
  • Auto off & Auto Temperature Lock, Anti-Scald Design: As a built-in safety feature, this coating iron hot comb will automatically shut off if not used for 60 minutes. The screen shows LOC when reaching at the target temperature to prevent accidentally pressing the wrong button..
  • Easy to Use & Travel Friendly: Upgrade electric hair brush has 360° swivel power cord design, prevents wire twining and makes it easy to operate with one hand at any angle. The dual voltage 100-240V and freely switch between ℃/℉ by press +/- buttons simultaneously, perfect for travel and business trip..
  • What more will you get? 1 hair straightening brush, 1 gap cleaner br....
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (3in - 38x65mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

Hantek DSO4202C Digital Multimeter Oscilloscope USB 200MHz 2 Channels LCD Display Waveform Generator

  • 100 MHz bandwidth, 1GSa/S sampling rate, 8M memory depth and built-in 25MHz DDS generator.
  • 14 kinds of trigger modes, 5 kinds of serial protocol and decodes, and 32 kinds of auto measurements.
  • Comes with 1 PP150 100MHz probe, 1 USB cable, 1 clip line and 1 US power cable.
  • Inludes another Hantek probe for 2nd channel.
  • Don't confuse it with professional lab scopes, or compare its built-in DDS generator with arbitrary ones.
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (2.5in - 35x45mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

CZC AUTO Wheel Bearing Buddy 1.98 Inch Bearing Protectors with Protective Bras for Trailer Boat, Chromed, Pair

  • Fitting Size: CZC AUTO Bearing Protectors fit 1.98 inch hub grease cap bore diameter (Please measure your hub bore size before ordering).
  • Universal Fitment: 2 Pack Bearing Buddies for trailers prevent wheel bearing failure on boat, RV, snowmobile, ATV and utility trailers.
  • Main functions: 1. Keep water, dirt or road grime out of wheel hubs and bearings. 2. Maintain pressure and keeps bearing greased.
  • Chrome-plated Steel Housing: Make the 1.98 inch trailer bearing buddy rustfree & corrosion resistant, ensures longer-lasting fit.
  • CZC AUTO - Reliable Brand in Bearing Buddy Industry. We offer 30-day money-back for any reason, 12-month warranty for quality-related issues. Any issue in using, simply contact us, your problem will be solved within 24 HOURS.
Check Stock

Moongiantgo Steam Generator Shower 9KW Steam Bath Spa Generator 95-131℉ Setting Waterproof Controller for Shower in Home Steam Room Steamer Sauna Machine (Heating 9M³/318 CUFT)

  • ...ns your pores and induces perspiration to deep clean your skin. Regular steam bathing promotes good health and helps prevent illnesses, as well as promoting soft, supple skin. Many people take steam baths daily to keep themselves relaxed and rejuvenated..
  • EASY TO INSTALL & 3-5MIN QUICK HEAT - Freely locate the steam generator under a bench inside the steam shower, a closet, a cabinet, basement or attic, provided it is a dry, ventilated space that isn’t exposed to freezing temperatures. Steam will begin flowing into the shower within 3-5 minutes after the system is turned on. Steam outlet head features a reservoir cup to hold aromatherapy oils..
  • WATERPROOF CONTROLLER - Let the controller can install both inside & outside of steam room. The temperature setting range is 95-131℉. The steam generator’s working time is 60 minutes and the machine will be off automatically if time is over..
  • SAFER OVER-HEAT PROTECTION & AUTO FUNCTIONS - When the room temperature higher than your setting, steam generator will stop heating and go into heat preservation or protection state. And with auto water filling, automatically off when time runs out function, water tank pressure safety protections, make you enjoy the steam bath better..
Check Stock

Dyna-Living Wind Turbine Generator Kit 400W DC 12V Wind Turbine Motor 3 Blades Wind Power Generator with Charge Controller for Home Marine Industrial Energy(Not Included mast)

  • [High-Quality and Durable]- The 400W wind turbine motor adopts a three-phase AC permanent magnet synchronous generator, free running, low noise and long service life. Teflon wire is heat resistant, which is not easy to damage the wire when the machine is overloaded. It is smooth in operation, good wind resistance for double-row bearing..
  • [Excellent Heat Resistance]-The coil is made of Teflon wire, which is resistant to high temperatures. It has effective regulation of current and voltage, low start-up speed but high wind energy utilization factor, which contributes to the annual energy output..
  • [High-Quality 3 Blades of Wind Turbine Generator]-The blade is equipped with a copper inlay part that does not damage the nylon fiber when the bolt is tightened, the blades are not easily deformed or broken. The working temperature is -40 ° C ~ 80 ° C, do not worry about the temperature being too low and causing the leaves to freeze..
  • [Unique Design]- The wind turbine generator adopts a permanent magnet rotor alternator and with a special kind of stator design, efficiently decreases resistance torque. And the wind turbines match the generators quite well, the blade is designed with aerodynamics to make the rotor run smoothly, quietly and with high wind energy u....
Check Stock