ReviewsAuto Orifice Tube

Twinkle Star Sewer Jetter Kit for Pressure Washer -100 ft Hose, 1/4 Inch NPT, Drain Cleaning Hose, Button Nose & Rotating Sewer Jetting Nozzle, Orifice 4.0, 4.5, 5.5, 4000 PSI

[Pressure Washer Sewer Jetter Kit]: The water jet drain cleaner can be used to remove indoor or outdoor drainage of many types, combined with any type of pressure washer, can easily flush obstacles and maintain flow. 1 x 100 FT Pressure Washer Hose, 3 x Button Nose – Orifice 4.0, 4.5, 5.5, 1 x Rotating Nozzle, 1 x M22-14 Solid Brass, 1 x Thread Seal Tape, 1 x 1/4 ” Quick Connector..
[Durable Plumbing Jetter Hose]: Small outside diameter flexible and strong toughness sewer line hose with couplings, allowing hose and nozzles to fit through sewer line. PE tube, PVC cover, Dual-layer terylene reinforcement, which is very durable and can resist weather,oil, ozone and abrasion..
[3 + 1 Sewer Jetter Nozzle]: 3 Button Noses, 1 front jet at 0° to clear the blockage in the pipe, 3 rear jets at 33° pushes forward and washes loose debris before. Orifice: 4.0, 4.5, 5.5. Rotating Nozzle rotates 3 rear jets at 33° for shot blasting, the water unblock pipe, clear and flush debris. Orifice: 4.5..
[Widely Used]: Work with lots electric and gas-powered pressure washers up to 4,000 PSI. The sewer jetter hose can be used for pressure washer pump with American standard M22-14 Solid Brass. It also can be connect to trigger gun or pressure washer wand with 1/4&#....

...1/4" high tenacity polyester textile braid, which is chemically bonded. It is ISO 9001 Certified. Pin test each crimp to check the proper internal crimp..
【Button nose sewer jetter nozzle】1 front jet at 0° angle can clear blockages. 3 rear jets at a 33° angle can flush out debris loosened by the front jet. The orifice is 4.0..
【Rotating sewer jet nozzle】3 backward rotating blasts into the clogged pipe and move the nozzle through the pipe. The nozzle is easy to slide into drain pipes and sewer lines. It offers an even cleaning and flushes out debris. The orifice is 4.5..
【Widely Application】The sewer jetter hose can connect to the pressure washer pump with an M22 coupler (female M22 to female 1/4’’ NPT). It can also connect to a pressure washer wand or trigger gun with a 1/4’’ quick disconnect plug. The sewer jetter hose connects to the sewer nozzle with a solid end. The other end is a swivel which releases stress between the sewer hose and gun/pressure washer outlet..

This is an Officially Licensed Ford Product.
TPMS Compliant, including inner "O" ring seal ensuring a clean valve orifice to maintain consistent tire pressure.

This is an Officially Licensed Ford Product.
TPMS Compliant, including inner "O" ring seal ensuring a clean valve orifice to maintain consistent tire pressure.

Brand New, OE replacement: UAC branded Liquid Line w/o Orifice Tube.
100% Guaranteed Fit! Add your car (year/make/model) to Amazon's garage to confirm.
tested to meet or exceed OEM specifications.
Goodyear / Veyance / Contitech Galaxy hoses used in the assembly.
All units are pressure tested for leaks to ensure product quality.
product is backed by industry leading warranty.

[COMPATIBILITY]--These are propane nozzle for turkey pot cooker, cast iron cooker stove with 3/8" male thread x 1/8" NPT thread and jets. The orifice compatible with Gasone cooker or other similar brand..
[SIZES]--The thread of propane orifice: 3/8" flare MNPT x 1/8" MNPT..
[PREMIUM QUALITY]--This gas orifice jets connector brass hose fitting is made of high quality brass. Brass for corrosion resistance and durability , high temperature ductility and low magnetic permeability..
[NOTE]--The propane stove orifice is not fit for potable water appliances..
[SERVICE WARRANTY]--If you have any questions with 3/8 flare to 1/8 orifice, please contact with us and we will reply within 24 hours..

ATTENTION: Please screw in the orifice nozzle tighten enough, or it is hard to get thick foam..
Include 1 piece of foam maker (mesh filter) and 1 piece of orifice nozzle tips (foam generator nozzle). They assembly inside foam cannon for foam....
If foam cannon works not very well as before, maybe mesh filter wore down and foam cannon orifice tips blocked. You can replace them with new ones and....
FOAM MAKER: Size: Diameter 0.61 x Height 0.41 inch.
foam creator made of stainless steel, work durably in the foam sprayer.
ORIFICE NOZZLE TIPS: NPT male screw nozzles, about 0.28 inch, Orifice Size 1.1 mm. Made of brass, work durably in the foam lance. Max. Pressure: 3000....

This sewer jetting nozzle is used in wide range of cleaning applications, such as general sewer and drain cleaning and industrial pipe and tube cleaning.
1 forward jet and 6 rear jets.1 forward hole is ideal for cutting debris and breaking up stubborn dirt ahead of it & 6 backward holes drive the nozzle forward and flush debris.

Kit includes HA-3i and HA-11i Inferno brazing tips.
and 3/16-inches by 12-feet A x A red hose.
Durable, long-life design crafted from strong 304 stainless steel tube stock and designed to stand up in the field.
Quality, precision manufacturing for consistent production and each tip is tested to ensure a perfect orifice and again to ensure flame quality.
Hottest tip, everytime based on exacting standards to eliminate irregular heating, "horns" and other inconsistencies.
Proof positive - the perfect flame - the tips are configured to produce reliable and repeatable flame performance and are evaluated using thermal photography techniques.

1 forward jet at 0° which clears blockages. 6 rear jets at 30°, which flush out debris loosened by the front jet..
Application: General sewer and drain cleaning.
The pressure drain jetter hose nozzle is made of stainless steel, durable and resistant to corrosion. Orifice Size: 6.5.
Fitting: 1/4 Inch quick connector + 1/4 Inch female NPT thread..
Working Pressure is up to 5000PSI. Water temperature is up to 310° F..