ReviewsAuto Part Fuel Injector

XTOOL D8 Diagnostic Scan Tool with 3 Years Updates($600 Value), 2023 Newest, CAN FD, ECU Coding, 38+ Resets, Full Bi-Directional Control, All Systems Diagnostics, Key Programming, Crankshaft Relearn

  • ...larm/auto start_stop/daytime running light and maximum speed limiter, etc..
  • ✅PMI for Ford, for Lincoln, for Mazda to copy code into used modules..
  • 【38+ SPECIAL FUNCTIONS】D8 auto scan tool comes with comprehensive special functions:|Oil Reset|EPB|SAS|BMS|Throttle|Injector Coding|ABS Bleed|Key Programming|A/T Match|Suspension|TPMS Reset|Headlight|Window|Seat|Power Balance|ABS Initialization|VSC Yaw Rate/SWS Calibration|Fuel Alcohol Content Reset|Trans Fluid Counter Reset|Idle Relearn| and etc. Note: Special Functions do NOT work on all cars. Please come to us with VIN # via xtooltoolsus @ outlook . c o m to check compatibility..
  • 【FULL BI-DIRECTIONAL CONTROLS】D8 is a full bi-directional control scan tool that can command car ECUs to perform various active tests like |Injector Tests|Fuel Injector Balance|EVAP Tests|Compression Test |Cooling Fan|A/C Clutch On/Off|ABS Motor Pump|Windows/Wipers/Sunroof/Doors| to provide in-depth diagnostic tests and pinpoint fault causes like locating bad injector efficiently & accurately. Note: Active Tests available vary across vehicles. Older vehicles tend to have less tests available..
Check Stock

Hemi: Scifi Alien Invasion Romance (Hell Squad Book 13)

  • XFI 2. 0 Plug and Play - FAST XFI Main and Injector Harnesses are designed to plug directly into the FAST XFI 2. 0 ECU. Each XFI 2. 0 system requires both a Main Harness and a separate Fuel Injector Harness to access basic XFI 2. 0 Fuel Injection functions..
  • OE Quality - Featuring quality wire, protective sleeving and brand-name connectors, FAST brand XFI harnesses bring OE quality into the performance aftermarket..
  • Modern HEMI - The XFI HEMI-specific fuel injector harness ensures a quick and easy XFI 2. 0 addition to your 5. 7/6. 1/6. 4L HEMI. Crafted to ensure quality connections and a tidy appearance, our HEMI injector harness is an easy, time-saving way to add XFI control to your next HEMI engine build or swap..
  • Tech Specs - The XFI Dodge 5. 7/6. 1/6. 4 fuel injector harness is constructed with USCAR/EV6 injector connectors, and the firing order is 1-8-4-3-6-5-7-2. Changing firing orders requires re-pinning injector harness..
Check Stock

FICM Engine Fuel Injector Complete Wire Harness - Replaces Part 5C3Z9D930A, 5C3Z-9D930-A - Compatible with Ford Vehicles F250 F350 F450 F550 - Powerstroke 6.0L Diesel - 2003-2007

  • Replacement Fuel Injector Control Module (FICM) Harness - This wire harness connects the fuel injectors on your 6.0 Powerstroke diesel engine to the FICM module. This is a complete wire harness with all connectors. If your truck is experiencing injection fault codes, idling or running rough your factory wiring may have a short or loose connection. Replace it and get you 6.0 Powerstroke running right..
  • Compatible Replacement for Ford Vehicles - 2003, 2004, 2005, 2006, 2007 F250, F350, F450, F550 and Excursion with the 6.0 Powerstroke Diesel engine. Including model years 03, 04, 05, 06, 07..
  • Replaces Part# - Replaces part number 5C3Z9D930A and 5C3Z-9D930-A - While this is a not a genuine OEM part, it is a direct replacement for the factory FICM injector wiring harness found on your F250, F350, F450, F550, or Excursion. Powerstroke 6.0 diesel Super Duty..
  • OEM Fit, Quality, Finish - This FICM wiring harness features OEM connections for a perfect connection to the FICM and the diesel fuel injectors. High temperature wires are used throughout to insure longevity. The entire wire harness features a high temperature wire loom to product both the harness and pigtails from the heat in your F250, F350, F450, F550, or Excursion's engine bay..
Check Stock

New Injection Pump 6738-71-1520 4063844 Fit for Cummins 6BT5.9 Engine Zexel

  • Includes tools to remove fuel injector sleeves, clean the injector bore and fuel galley, and install injector sleeve cups.
  • With the head removed, the slide hammer adapter can be installed to pull the injector.
  • Brush set properly cleans the injector bore which is required for the fuel injector sleeve cup installer to properly seat the cup.
  • Applications include: 2006-2009 4. 5L Diesel, 2004-2010 6. 0L Diesel.
Check Stock

Design Engineering 010378 Fuel Rail and Injector Cover Kit for Jeep (1997-2004, 4.0L Engine)

  • Designed for 1997-2004 Jeep models with inline 6 motor.
  • Reduces fuel rail and injector heat sink, reduces the chance of vapor lock, and keeps fuel cool.
  • Easy to install kit includes one manifold heat shield, one fuel rail heat cover, size fuel injector covers, and 12 fuel injector O-rings.
  • The heat shield is a glass fiber-backed heat barrier with thick aluminum skin.
  • The fuel rail and injector covers are designed to reflect engine heat.
  • the hook and loop design makes for easy installation.
Check Stock

Fuel Injector Removal Puller Kit Injector Seal Install Tool Compatible with Volkswagen TDi 4 Cyl 8V 16V Diesel Replacement for Audi VW 1.2 1.4 1.6 1.8 2.0 2.7 3.0 3.2 3.6 V6 4.2 V8 FSI TSI TFSI Petrol

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

YZHIDIANF 6 Pcs FJ1147 62410 Fuel Injector 0280158233 Fits For For:-Ram ProMaster, For:-Jeep Grand Cherokee Wrangler, For:-Dodge For:-Chrysler 3.6L V6 2011-2019, 05184085AC 5184085AD

  • ⭐⭐⭐⭐⭐【Little Secret】Because Of Individual Model Differences, If The Rubber Ring Does Not Fit, Small, You Can Remove The Rubber Ring Of The Injector Nozzle On The Original Car, Replace The Rubber Ring Of Our New Injector Nozzle, You Can Very Perfectly Solve The Sealing Problem And Rubber Ring Fit Problem.
  • 【Application】 Compatible with For:-Ram ProMaster 3.6L , For:-Jeep Grand Cherokee Wrangler 3.6L, For:-Dodge Avenger Challenger Charger Durango Grand Caravan Journey For:-Chrysler 200 300 Town & Country 3.6L V6 2011 2012 2013 2014 2015 2016 2017 2018 2019.
  • OEM/Alternate Part Numbers: 0280158233 05184085AC 4G2269 280158233 5184085AD 62410 812-11135 RL184085AC.
  • 【Preium Quality】 PREVENTS CORROSION AND BUILD UP with stainless steel slide and spring assembly, leading to longer service life of fuel injection system.REPLACEMENT FUEL INJECTOR PROMOTES SMOOTH ENGINE OPERATION and optimal gas efficiency.
  • can reduce harmful emissions caused by worn injectors.
  • 【Regular Cleaning Fuel Injectors】Generally Speaking, If The Car Is In Good Condition And The Fuel Quality Is Good, It Can Be Done Every 40,000-60,000 ....
Check Stock

Diesel Fuel injector Common Rail Injectors 095000-5215 Car Accessories 0950005215 Engine Parts Fits for HINO P11C Kobelco SK450 Excavator

  • Diesel Fuel injector fits for HINO P11C Engine.
  • Diesel Fuel injector fits for Kobelco SK450 Excavator.
  • Manufacturer Part Number:095000-5215 OEM Number: 095000-5215.
  • If you don't know which model to choose, Please contact us..
  • Material: Made of high quality for longer durability and strength.100% quality inspection. Upgraded packaging avoid damage..
Check Stock

Aumzong FJ504 Spider Fuel Injector Assembly，Compatible with 1996-2002 GMC Chevy Pickup Truck Suburban Express Savana Cadillac Escalade 5.0L 5.7L V8

  • Manufacturer Part Number: FJ504，89060440，17091626， 25340347, 2173029, 17114163, 93441235, 217-3029, 4G1888, 16970, 63886, 238887, 833221028, 800-1513N, M1046..
  • The injector is a fuel delivery component that is responsible for injecting gasoline or diesel fuel into the combustion chamber. It is simply a special valve that primarily receives and delivers fuel to the cylinder. It is electronically controlled to open and close completely or partially, depending on the data collected by various sensors in the vehicle..
  • There is a bracket in our package. Please be sure to fix the bracket on the injector before installing the injector. This can prevent other problems such as oil leakage. We recommend that you go to a professional 4S shop to install it to ensure your driving Safety..
  • Fitment: for Chevy GMC Oldsmobile Pickup Truck V8 5.0L 5.7L.
  • Note：The tube is plastic, please rotate and twist, please be careful not to pull, it will cause the tube to break and can not be used（For non-professionals, please install under the guidance of professionals）.
Check Stock

Sea Foam IC5 Fuel Injector Cleaner, 5.25 oz

  • Treats Up To 25 Gallons ps, lost acceleration and rough idling for improved performance.
  • Jet fuel serves as the carrier for the active ingredien Helps Recover Lost Mpg And Reduce Exhaust Emissionst nts, creating a high-quality additive for easy auto care.
  • Add this fuel injector treatment to your vehicle regularly when you fill your gas tank Friction modifier in the fuel additive combats upper cylinder friction.
  • The product is 5, 25 oz, fuel treatment, for gasoline lpg and diesel fuel, contains no alcohol/solvents/kerosene/diesel fuel, lubricates rings and cylinder walls for longer life, increases mileage, cleans and lubricates valves, pumps, carburetors, and injectors.
  • Cleans fuel injectors, intake valves and ports to restore performance, fuel economy and prevents future carbon build-up, which reduces emissions.
Check Stock