ReviewsAuto Power off Voltage Tester

PM2302 Digital Resistance Meter Ground Earth Tester 0-4K ohm Insulation Tester Multimeter with LCD Backlight Display

  • [Multi Functions] This PM2302 resistance tester can be used to measure maximum, minimum or average and measure relatively.
  • low battery indication and 2 Pole and 3 Pole Mode..
  • [Convenient] This insulation tester can store 100 group of test result, which will not be lost even in case of power cuts..
  • [Easy reading] This digital resistance tester is equipped with large digital LCD and backlights that allow users read the information on LCD easily. Digital Display & Analog Bars Display..
  • [Auto power-off function] It has auto power-off function that conserves battery life and increases the lifespan of your multimeter..
  • [Application] It is the ideal tool for electrical inspection and repair..
Check Stock

Autel PowerScan PS100 Power Circuit Probe Kit with 40ft Cable, 12V 24V Automotive Circuit Tester, Car Electrical Diagnostic Tool, AC DC Resistance Voltage, Short Finder, Continuity/Probe/Signal Test

  • 【2023 ALL-IN-ONE POWER CIRCUIT TESTER KIT---ACCURATELY】Autel PowerScan PS100 is most accurate power circuit probe tester yet, with 160x128 TFT display test all 6-30 volt vehicle electrical systems. Autel PS100 supports voltage&polarity test, continuity test, signal circuit test, components activate, check bad grounding, locate short circuits, circuit breaker protection, etc. Intuitive interface with ergonomic design makes PS100 be best gift for all novice drivers or pro circuit repairers..
  • 【FOUR WORKING MODE---INTUITIVE&EASY】Four working modes make circuit detection more simple:DC Voltage, AC Voltage, Resistance, Tone On/ Off. DC Voltage mode can read DC voltage with 0.1V resolution.
  • AC Voltage can read Max & Min voltage, frequency and duty cycle quickly.
  • Resistance mode can read resistance between tip and auxiliary ground wire. Unique Tone On/Off Design is really useful when working in bright areas, it can judge the circuit voltage according to the volume of the sound..
  • 【COMPONENT ACTIVATION】The component activation feature is specially designed to troubleshoot on/ off-board electrical equipment. By activating the signal generated by th....
Check Stock

Digital Pen Type Multimeter INFURIDER YF-38B Handheld Auto-ranging Voltmeter Ohmmeter for DC AC Voltage,Resistance,Ohm Volt Test Meter with Diode Continuity

  • 【High Accurately】Display with 2000 Counts,Volt meter can accurate autoranging measurement for AC DC voltage to 600V:+/-0.5% of reading.Resistance to 20MΩ. Features with data hold,Diode test and Continuity Buzzer..
  • 【Save your Battery】Pen type digital volt tester with auto power off function and low battery indication, it will automatically shut down if you do not further operation after 20 mins..
  • 【Backlight+Flashlight】Press “☀” button on the pen multimeter to turn on bright flashlight and LCD screen backlit, Then you can accurately testing and reading in the darkness..
  • 【Overload Protection】YF-38B pen type digital multi tester features double insulation protection, CE 600V CAT Ⅲ. This volt tester is portable and stable performance, and works well as a voltage pen type and a necessity for a daily usage.  .
  • 【After-Sales Warranty】INFURIDER provide lifetime technical support, if you have any questions with our products. Do not hesitate to contact us! we will respond to you within 24hours..
Check Stock

AUTOOL Power Probe Circuit Tester 9-30V Automotive Power Circuit Diagnostic Tool Car Fuse Relay Electrical System Tester Digital Voltage Short Finder Thermometer for Vehicle Cable Length 3.6Ft

  • ...is easy to operate, and all operations can be completed with only two buttons. Briefly press the "M" key on the probe tester to switch five test modes. Briefly press the "Lighting" button on the probe tester to turn on or off the light beside the probe..
  • 【Five Modes Optional】 Multi-function Mode: digital display voltage measurement, on-off test, positive and negative pole test. Voltage Test: digital display voltage measurement. On-off Test: can detect open circuit, path, virtual circuit and real circuit. Positive and Negative Pole Test: determine the positive and negative poles. Temperature Test: the pointer is equipped with a temperature sensor to detect the temperature of the specified contact..
  • 【Excellent Design】 The design of this power short circuit probe is exquisite and compact, only 0.2 pounds, easy to carry and operate. The length of the wire is about 3.6 ft, which can cover the entire engine compartment and facilitate the inspection of the vehicle's electrical system. The high sensitivity probe with a tip makes it easier to touch small and difficult areas..
  • 【Safety Protection】The power short circuit probe has overload protection function. When the voltage or current is overloaded, the circuit tester probe will activate the overload....
Check Stock

Signstek UNI-T UT681 Handheld HDMI Cable Tester with Fast Line Collocation for HDMI and Mini-HDMI Connections

  • Application of UT681: UT681 HDMI is a professional tester for HD cable (HDMI 1.2V/1.3V/1.4V/2.0V) test.
  • Function of UT681: It can quickly scan and test up to 19 wires and decide which one is short circuit, open circuit, or in wrong order.
  • Double testing mode: At the power on state, short press the ON/OFF/Option key to switch between scan mode and full display mode. The state indicator flashing style is to identify which mode is chosen.
  • Battery low voltage test: In order to make sure the HD cable tester’s performance, when the battery voltage is lower than about 7.2V, the blue light flashes, prompting to replace the battery.
  • Auto shut down function: when not operation during the last 10 minutes, the instrument will automatically shut down..
Check Stock

Non-Contact Voltage Tester with Adjustable Sensitivity, LCD Display, LED Flashlight, Buzzer Alarm, Dual Range 12V-1000V/48V-1000V & Live/Null Wire Judgment - Tacklife VT02

  • Please press the power button for 2 seconds to switch it on.
  • ▲Non-Contact & Safe Voltage Tester – Testing can be achieved without physical contact for its NCV Inductive Probe.
  • Insulation operation ensures the safety of testing.
  • In testing AC voltage, it can automatically detect the live wire or null wire.
  • In the vicinity of the voltage to be tested, the pen will give an alarming sound;Safety Compliance:CAT.III 1000V CAT.IV 600V;CE.
  • ▲Adjustable Sensitivity & Dual Range Testing – Adjustable sensitivity makes its measurement more sensitive and flexible.
  • The Voltage Tester Pen has the dual testing range, you can adjust the sensitivity according to your needs(12-1000V AC or 48-1000V AC).
  • Automatic Recognition of Voltage Intensity.
  • In using, the NVC sensor of probe can automatically identify the voltage and display it on the LCD screen, simple and clear.
  • ▲High Definition LCD Screen & Low Battery Indicator – When testing the voltage, the brightness bar on the screen will tell you the voltage intensity.
  • The screen will light up in red or green to distinguish the Live/Null Wire.
  • When the battery voltage drops to less than 2.5 V, the flashlight of LED display reminds you to repl....
Check Stock

Non-Contact Voltage Tester, Dual Range Voltage Tester AC 12V-1000V/48V-1000V, ENGiNDOT Live/Null Wire Tester, Electrical Tester with LCD Display, Buzzer & Light Alarm, Breakpoint Test (Blue)

  • 【Safety Non-Contact Voltage Tester】Non-Contact Voltage Tester is safer for testing all Electric Appliances in Your Family. The tester with NCV inductive probe for AC voltage Just places the tip near a terminal strip, outlet, or supply cord. When the tip glows red and the pen beeps, you know there's voltage present. The live wire detector can automatically detect the live or neutral wire..
  • 【 High-Efficiency And Convenient 】The tester with LCD display. When the voltage is detected, the alarm will send out green or red light and beep. When the higher the sensed voltage or the closer it is to the voltage source, it beeps at a higher frequency. At the same time, the screen will be red or green, red means the high voltage and live wire are detected, green means the low voltage and null wire are detected..
  • 【DUAL RANGE/ High&Low Sensitivity】The sensitivity/flashlight key can be switched at high and low sensitivity. Detect high and low voltage (AC 12-1000V /48-1000V )Press the S button to adjust sensitivity and adapt low range for doorbells, thermostats, irrigation wiring..
  • 【Multifunction Design 】Use the Non-Contact Voltage Detector in Circuit Breakers, Lighting Fixtures, Switches, Outlets, Wires, and Anywhere You Need it. Bright LED flashli....
Check Stock

Measureman Non-Contact Detector AC Voltage Tester Pen 12-1000V/48-1000V Dual Range with LED Flashlight Live/Null Wire Judgment

  • Non-contact: Just place the tip near a terminal strip, outlet, or supply cord. It will send out multiple alarms through sound and light. Red means....
  • Dual range: The Voltage Tester Pen has the dual testing range. You can press the S button to adjust sensitivity (12-1000V/48-1000V AC)..
  • LCD display and LED light: Bright LED flashlight ensures clear views in dark and narrow spaces. The tester pen with LCD display, easily to get the....
  • Low power consumption: Auto power-off feature conserves and extends battery life..
  • Portable design: Pocket-sized, pen hook allows you to carry it in your pocket..
Check Stock

AenKall AC Voltage Tester Pen Non-Contact Voltage Detector, Electrical Tester 12V-1000V with LED Flashing and Buzzer Alarm for Live/Null Wire Judgment

  • 【Non-Contact】The voltage tester pen using NCV inductive probe to detect voltage in a non-contact way. You just need to put the probe close to the power supply, when the pen beeps, you will know there's voltage present, so you don't worry about there could be any possibility of being shocked by the electricity. (It can accurately Identify null and live wire, and can be used as Wire breakpoint finder).
  • 【Safe and Easy to Use】The AC voltage detector pen has【CE CAT III600V RoHS Certificate】and It's safe. Easy to use at the same time, The tip of the voltage tester pen glows red and beeping sound. When the higher the sensed voltage is, or the closer it is to the voltage source, it beeps at a higher frequency and the number of glows red will more. You don't have to call a professional electrician if you have it, the voltage tester pen is perfect for DIYers, hobbyists and housewives..
  • 【Multifunction and Portable】The non-contact voltage tester pen comes with an emergency LED torch to support operation in dim environments. It can automatically turns off the power after 5 minutes of no operation or signal detection. Only pocket-sized, the pen hook allows you to carry it in your shirt pocket..
  • 【Wide Range of Tests】The voltage test range of this e....
Check Stock

Electronic Load Battery Capacity Tester, EBC-A40L 5V High Current Lithium Battery Capacity Tester 40A Manual 200W CC/CP

  • EBC-A40L Electronic Load Battery Capacity Tester Charge / Discharge 40A 200W.
  • Voltage Range:0-5V,Voltage Accuracy:0.2%+-0.003V, Current Range:0.1- 40A ( Max charging current is 40A ) , Current Accuracy:0.2%+0.01A.
  • Discharging Mode:CC/CP, Discharging Termination:Time/Cut-off Voltage/Manual, Discharging Power:200W Max.
  • Charging Mode:CV, Charging Termination:Cut-off Current/Manual, Heat Dissipation:Fan, Power Supply:AC110V.
  • Package Included: 1 x Battery Tester,1 x Online cable, 1 x Testing cable, 1 x Power supply cable.
Check Stock

IDEAL INDUSTRIES INC. 61-025 Volt Aware Non-Contact Voltage Tester, Clear and Compact Voltage Testing, CATIV for 1000v

  • ACCURATE VOLTAGE TESTER: Green LED shows unit is active, flashing red indicates live voltage. The VoltAware NCVtester is useful for identifying hot conductors, finding breaks in wires and detecting the presence of AC voltage at outlets, switches, electrical panels, wires and cables..
  • ULTRA EASY TO USE: Twist the tester body to the On position and verify the green light is on. Verify tester operation on a known voltage source. Next, place the tip of the tester near an AC voltage source to obtain a voltage indication. Voltage presence is indicated by a red, flashing light. If no voltage is detected for a period of 15 minutes, the tester will flash green three times then shut off automatically.* Twist the tester body to the Off position, then back to On to reactivate..
  • SLEEK, COMPACT DESIGN: The sleek, non-contact voltage tester designed by the innovative minds at IDEAL. Its compact design makes it ultra easy to use, even in tight spaces and it is packed with features that will help you on the job..
  • BATTERIES INCLUDED: (2) AAA Batteries included with voltage tester. Quick and easy battery replacement — with the tester in the middle position, simply pull apart the two case halves and replace with 2 AAA (LR03) batteries..
Check Stock