ReviewsAuto Rubber Fitting

3M Auto Bedding and Glazing Compound, 08509, 1/10 gal Cartridge

  • Designed for creating seal between rubber windshield gasket and auto body.
  • Non-hardening synthetic rubber-based formula is ideal as a glass bedding.
  • Suitable for use as supplementary sealer for auto glass.
  • Non-sagging properties are excellent for overhead and vertical auto seals.
  • One-part sealer applies without mixing and cleans quickly with a dry rag.
  • For industrial/occupational use only. Not for consumer sale or use..
Check Stock

DERNORD 2 Pack 1.5\ Tri Clamp to 0.5\ Hose Barbed Adapter SUS304 Sanitary Hose Barb Pipe Fitting

  • Adapter for connecting pipes or fittings of different types.
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
  • For use with rubber hoses: Barb: 1/2" Barb For Rubber, Plastic, TPU, or other hose.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock

DERNORD 1.5\ Tri Clamp to 1\ Hose Barbed Adapter SUS304 Sanitary Hose Pipe Fitting (1 Inch Barb Hose)

  • Adapter for connecting pipes or fittings of different types.
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
  • For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock

10FT 6AN Braided Fuel Line Hose -6AN Nylon Braided for 3/8\ Tube Size

  • Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc.
  • Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch).
  • Working pressure: 500 PSI. Burst pressure: 2000 PSI.
  • Note: Double check the hose size before bidding. Our rubber hose should compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT..
Check Stock

Auto Meter 4384 Ultra-Lite Mechanical Vacuum Gauge Regular, 2.3125 in.

  • Traditional incandescent lighting illuminates around the perimeter of the dial.
  • Auto Meter’s race proven mechanical instruments provide trusted accuracy while being simple to install.
  • No electrical system required for gauge operation - compatible with every street or race vehicle.
  • Mechanical movements provide accuracy and durability even in the harshest environments.
  • Gauge kit includes 1/8” nylon line, T-Fitting, vacuum fitting, compression fittings, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation.
Check Stock

Wind Fairing for Low Profile Rack / 1165mm/1255mm(W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1087mm(42.8") L x 2mm(0.1") W x 127mm(5") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND FITTING: A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

TWCC 770 Pcs Rubber O Rings Kit 18 Size Universal Nitrile NBR Washer Gasket Assortment Set for Automotive Faucet Pressure Plumbing Sealing Repair,Air or Gas Connections,Resist Oil and Heat

  • {WIDE APPLICATION} O-ring kit for faucets,plumbing,pressure washer,hose nozzles,sinks,filters,hydraulics fluid,auto engines, machinery bearings,pumps,boats,oils,gas control valve, spray, air,kitchen bathroom water fitting seal leak repair.
  • {MULTIPLE SIZE} Metric oring assortment kits contains the most commonly used 18 size ID:(3mm, 4mm, 4.5mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, 13mm, 14mm, 17mm, 18mm, 20mm, 22mm, 25mm, 27mm) x Thk:(1mm, 2mm, 2.4mm, 2.5mm, 3mm, 4mm),can meet almost all your needs.
  • {MATERIAL} Rubber o rings set made of high-quality commercial grade black nitrile(NBR,Buna-N),it has excellent high temperature and low temperature resistance,the working temperature range is from -40℃/-40℉ to 120℃/248℉,maintains good elasticity,has It has the advantages of ozone resistance and weather resistance.
  • {CONVENIENT STORAGE} Assorted o rings rubber are placed in a sturdy plastic storage box, each size with detailed label paper,are stored in order of small to large for easy retrieval.It can be used for months or even years rather than buying them at a hardware store.
  • {SATISFACTION GUANTEE} TWCC brand always guarantees high-quality products and good after-sales service. If you have any unhappy,we would return your kit for free with no reason.
Check Stock

Front Runner Wind Fairing Compatible with Land Rover Discovery LR3/LR4

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing is made of Black powder coated aluminum and EPDM Rubber. It help improves fuel consumption..
  • IMPROVING AERODYNAMICS: Improve the aerodynamics of your Front Runner Slimline II roof rack and reduce wind noise when travelling at high speeds..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Securely mounts to Slimline II rack and extends to the Discovery LR3/LR4's roof. A clear protective strip for the roof is included that stops any scuffing caused by dust..
  • DIMENSIONS: 157mm (6.2") L x 1174mm (46.2") W x 174mm (6.9") H and consists of 1 x Wind Fairing, 1 x Rubber Blade, and Installation Hardware..
  • INSTALLATION AND FITTING: An additional rubber blade is fitted to the bottom edge of the Wind Fairing to seal any gaps and act as a roof guard when traveling over rough terrain. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

theBlueStone -4AN -6AN -8AN -10AN Braided Fuel Line Hose 20FT -8AN Nylon Braided for 1/2' Tube Size

  • Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc.
  • Inner Diameter: 11.12 mm (0.44 inch), Outer Diameter: 17.2 mm (0.68 inch).
  • Working pressure: 500 PSI. Burst pressure: 2000 PSI.
  • Note: Double check the hose size before bidding. Our rubber hose should compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT..
Check Stock

theBlueStone -4AN -6AN -8AN -10AN Braided Fuel Line Hose 10FT -6AN Nylon Braided for 3/8" Tube Size

  • Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc.
  • Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch).
  • Working pressure: 500 PSI. Burst pressure: 2000 PSI.
  • Note: Double check the hose size before bidding. Our rubber hose should compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT..
Check Stock

EK-Quantum Torque Rotary 90° - Black 90 Degree Fitting

  • EK-Quantum Torque (Adapter Fitting) is a revolvable angled (90°) adapter fitting with G1/4" threads..
  • In the form of a cylinder, it is very sturdy and there are zero movements in the revolvable joint..
  • This Quantum Line adapter is made out of CNC machined brass while the seal is made by quality rubber O-rings. It is an extremely secure and sturdy....
  • The adapter allows for connection of fitting with G1/4" threads to extend tubing possibilities in your water cooled system allowing for easier bends....
  • The outer diameter measures 23mm while the installed height is 31.5mm..
Check Stock