ReviewsAutomatic Servo System

Liyeehao 1/10 Servo Stand Mount, RC Servo Stand Mount, Assemble Wear Resistance RC Accessory for RC Car Easy to Install Replacement

  • The servo stand mount can be firmly assembled together without any other attachment, very easy to install and does not take much time..
  • Superb craftsmanship and superior quality enable to increase rigidity and prevent distortion, help extend the service time of servo system..
  • Servo stand mount with steering link rod, fit for AXIAL SCX10 II 90046 1/10 RC car..
  • Servo stand mount is made of high quality aluminum alloy material, steering link rod is mainly made of high quality metal, strong wear resistance, corrosion resistance, no rust and durability..
  • Wonderful replacement for the old or broken one, directly fitment..
Check Stock

Honeywell International VR8200A2132 Valve

  • Includes: One 1/2″ x 3/8″ straight busing, one 3/4″ straighr flange, one hex wrench, one pilot compressing fitting for 1/4″ O.D. tubing, 393691 Natural to LP gas conversion kit.
  • Gas valves include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
  • Solenoid-operated first automatic valve opens on thermostat call for heat.
  • Diaphragm-operated second automatic valve opens under control of regulator.
  • closes if gas or power supply is interrupted.
Check Stock

ALAMSCN 5PCS SG90 9g Servo Motor + 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit DIY Kit for RC Robot Arm Helicopter Airplane Car Boat Remote Control for Arduino for Raspberry pi

  • These SG90 9G micro servo motors have a completely new redesigned PCB and control system to provide more accuracy..
  • Its internal gearing and motor are also upgraded to improve dead bandwidth and centering..
  • For SG90 9G micro servo motor is far more accurate and safe to use in aircraft which require precise servo movements and perfect centering..
  • Apply to remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on Arduino ,Raspberry Pi..
  • Package includes: 5PCS SG90 9g Micro Servo + 1PC PWM Servo Motor Driver. Cost-effective kit to meet your DIY needs..
Check Stock

HiLetgo 3pcs RC Servo Tester 3CH Digital Multi ECS Consistency Speed Controller Checker Adjustment Steering Gear Tester CCPM Master for RC Helicopter Car Boat

  • 1.There are 3 modes to check servos or ESC:.
  • 2.Manual mode: turn the knob with different speed, check the reaction time.
  • 3.Neutral mode: make the servo go back to the neutral point..
  • 4.Automatic "window wiper" mode: make the servo swing like a window wipers in the biggest angle..
Check Stock

US STOCK M3-M16 Drilling Tapping Machine Tap Collets 1100mm Electric Tapper Machine Threading Machine

  • Tapping angle: Universal.Rotation Speed: 0-312r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Standard Accessories Tapping Arm (One Set) Servo Motor And Reducer ( One Set).Tap Holder M3-M16 (One Set) Universal Joint(Tapping For a Vertical/Horizontal ) Optional Accessories:Magnetic Base 300KG (Tapping An Arbitrary Range) Moving Workbench (Mobile Tapping Machine ).
  • Applicable Materials: Aluminum, Copper, A3 steel, 45 steel, Cast Iron, Pig Iron, Q235, S136, mold steel, 718H, 40Cr, Stainless Steel and other metal materials.
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Main Parts(No console):Import Servo Motor+Enhanced Reducer + Touch Screen Control System+High-precision Cantilever Bracket+Import Tap Collet(Standard)+Universal Joint(Tapping for a Vertical/Horizontal).
Check Stock

Teyleten Robot RC Servo Tester 3CH Digital Multi ECS Consistency Speed Controller Checker Tester Master Adjustment Steering Gear for RC Helicopter Car Boat 3pcs

  • Manual: turn the knob with different speed, check the reaction time.
  • Neutral: make the servo go back to the neutral point..
  • Automatic window wiper: make the servo swing like a window wipers in the biggest angle..
  • it can easily detect and set the virtual bit, jitter and middle bit of the server..
Check Stock

Aquarium Fish Feeder Automatic Fish Feeders Auto Fish Food Timer Feeder for Fish Tank

  • Simple operation and installation:Lmanual and automatic and adjustable discharge port and 360 degrees rotation.
  • Multiple sets of multiple flexible timing functions,can be automatically fed many times by week and date..
  • WIFI and VOICE CONTROL:You can download app on your phone and remotely control the feeder. Also, it comes with voice control, so that you can easily control the feeder by giving an voice order..
  • Intelligent servo system:It can be continue to work according to the feeding time that set during networking after disconnecting the network.
  • Power outage feeding protection:The fish tank filter stops working during a long power outage.If put in the food at this time,it will increase the amount of nitrite in the water,Increase the oxygen consumption of water and accelerate the metabolic failure of fish.
Check Stock

Juki Industrial Lockstitch DDL Series Servo Motor, Table, LED Lamp.Assembly Required. DIY (DDL-5550 Made in Japan)

  • ✅Application: Medium-weight Max. sewing speed: 5,500 Stitches per Minute Max. stitch length: 5mm Needle bar stroke: 30.7mm Lift of the presser foot by hand: 5.5mm Lift of the presser foot: 13mm Needle (at the time of delivery): DB×1 (#14) #9~#18 / 134 (Nm90) Feed dog: 4-row (3-row) Hook: Automatic-lubricating full-rotary hook Lubrication: Automatic Lubricating oil: JUKI New Defrix Oil No.1 (equivalent to ISO VG7).
  • ✅SINGLE NEEDLE LOCKSTITCH AUTO-LUBRICATION OF HOOK HORIZONTAL AXIS HOOK AND BOBBIN ADJUSTABLE REVERSE FEED.
  • ✅It comes complete with sewing machine table and Electronic DC Servo Motor 1/2 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM (Model DMS-550), everything (drawer, belt, tools,lamp and instruction manual) brand new,Thread Stand *Bobbin Winder *Oil Pan/Knee Lifter *Extra Bobbins *Extra Needles *Instruction Manual *Screw Driver* Machine Oil *Table top (size 48" x 20") *Heavy Duty Legs, *Table Top,*servo motor *V Belt Hardware.✅.ASSEMBLY REQUIRED.
Check Stock

DIYmall RC Servo Tester 3CH Digital Multi Servo Tester ECS RC Consistency CCMP Master Speed Controller Checker

  • CCPM Servo Consistency Master/Servo tester, 2PCS:https://www(dot)amazon(dot)com/dp/B095HDN2T6?ref=myi_title_dp.
  • The device also can be used as a signal generator for electric speed controller (ESC).
  • With it, you can test your motor system without using a transmitter and receiver.
  • There are 3 modes to check servos or ESC,the ability to easily detect and configure the server's virtual spaces, jitter and median. It can connect 3 servos of the CCPM helicopters and select servos.
  • What you will get is: 1 X Servo tester. Any question, pls feel free to contact us.
Check Stock

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

  • [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
  • [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
  • [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
  • [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
  • [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check Stock

Audio-Technica AT-LP60XBT Bluetooth Fully Automatic Stereo Turntable Bundle with PreSonus Eris E3.5 Bluetooth Monitors and Knox Gear Cleaning Kit (3 Items)

  • Bundle Includes: Audio-Technica AT-LP60XBT Bluetooth Fully Automatic Stereo Turntable (Black), PreSonus Eris E3.5 Bluetooth Reference Monitors with Acoustic Tuning (Pair), and Knox Gear Vinyl Record Care System.
  • Two Speeds: The Audio-Technica Bluetooth Fully Automatic Belt-Drive Stereo Turntable is capable of playing records at two speeds. Play all of your favorite records at both 33-1/3 RPM and 45 RPM. It utilizes an anti-resonance die cast aluminum platter.
  • Superior Sound: The AT-LP60XBT Stereo Turntable is powered by a DC servo-controlled motor. With the built-in phono pre-amplifier you can connect to your favorite audio devices to get the sweet sound of vinyl from anywhere. The ATLP60X features a redesigned tonearm base and headshell to improve tracking and reduce resonance. The AC adapter moves the AC/DC conversion outside the chassis to further reduce noise.
  • Dual Magnet: Cartridge Audio-Technica has been a leader in phono cartridge design for more than 50 years. The Audio-Technica AT-LP60XBT has a Dual Magnet cartridge with a replaceable diamond stylus. The cartridge is integrated into the headshell for assured performance and ease of setup.
Check Stock