ReviewsAutomatic Shift Boot

SHIFTIN Leather Wood Gear Shift Knob Stick Shifter for Toyota Land Cruiser Prado FJ-150 Lexus GX460 GX470 (Black Leather / Maple Brown)

  • Material: wear resistant microfiber leather with ABS wood surface..
  • Size: 9cm*5.5cm*4.2cm - Detail Dimensions show in the picture..
  • Fits most Automatic Transmission shifters with 8mm thread diameter size (M8 x 1.25). The compatibility list shown in the picture is not fully complete so if your car model has an automatic transmission gear changer and has 8mm knob thread diameters size and has no boot cover or release button, it will most likely fit, please also check our size before buying!.
  • Very good quality and unique design, perfect replacement! Easy to install, just remove the old part and install the new part. (Please press the shift knob with force and twist it when you install the new part!).
  • This shift knob can just fit 8mm shift stick,not for 10mm or 12mm. We mark the size in the picture already,please check the size to see before buying!!.
Check Stock

B&M Automatic Ratchet Quicksilver Shifter,Universal 3 & 4 Speed,Chrome with Black Base,Compatible with TH400,350,250,200,700R4,4L60,4L60E,4L65E,4L80E AUTO TRANSMISSIONS

  • Brand New B&M Automatic Ratchet Quicksilver Shifter, Chrome with Black Base, Universal 3 & 4 Speed (Part #80683).
  • Features a trigger-less shift handle. To access Reverse or Forward gears, lift the handle & pull back, then let the handle drop in gear. No need to lift the handle again to shift gears until you either need to access Reverse or Park. From Drive, lift the handle straight up & this will bypass the reverse lockout safety feature, then move the shift handle forward into Reverse or Park. The reverse lockout feature meets NHRA & IHRA safety regulation..
  • To use the ratcheting function at the strip, shift into low gear, launch the vehicle & hit the shifter forward when it is time to shift. You cannot over-shift & miss a gear. The chrome bezel, shift stick & knob are all accented by the black console, flat boot & deep blue medallion. The shifter includes a lighted gear position indicator in the bezel, a micro-switch for back-up lights and a neutral safety switch preventing accidental starts when in gear..
  • Includes a 5-foot long performance shift cable, cable bracket, trans shift lever, all hardware and detailed instructions for an easy installation you can do at home. Compatible with TH350, TH400, 700R4, 200R4, 4L60, 4L60E - 4L80E transmissions ....
Check Stock

Pursuestar Tan Leather Light Brown Wood Upgrade Shift Knob for Toyota RAV4 Land Cruiser Hiace Solara Sienna Avalon Lexus ES RX GS LS M8X1.25

  • Material: Wear resistant microfiber leather with wood surface. Color: Tan Leather and wood, chrome color.
  • Size: Detail Dimensions show in the picture. Package Content: Gear Shift Knob*1.
  • Fits most Automatic Transmission shifters with 8mm thread diameter size (M8 x 1.25). The compatibility list shown in the picture is not fully complete so if your car model has an automatic transmission gear changer and has 8mm knob thread diameters size and has no boot cover or release button, it will most likely fit. For example, Toyota, Mazda, and Acura car models, please also check our size before buying!.
  • Very good quality and unique design, perfect replacement! Easy to install, just remove the old part and install the new part. (Please press the shift knob with force and twist it when you install the new part!).
  • This shift knob can just fit 8mm shift stick,not for 10mm or 12mm. We mark the size in the picture already,please check the size to see before buying!!.
Check Stock

New B&M Automatic Ratchet MEGA Shifter,Universal 3 & 4 Speed,Polished Aluminum with Black Base,Compatible with GM TH400,350,250,200,700R4,4L60,4L60E,4L65E,4L80E AUTO TRANSMISSIONS

  • Brand New B&M Automatic Ratchet Mega Shifter, Polished Aluminum with Black Base, Universal 3 & 4 Speed (Part #80690).
  • Compatible with 3 or 4 Speed Automatic Transmissions | Ratchet Action Ensures Positive Up or Down Shifts | Forward and Reverse Shift Pattern Compatible | Console can be Trimmed for Custom Fit | Meets NHRA/IHRA Saftey Standards | Classic Race Styling & Heritage | Over 65 Years of B&M Quality | Straight Forward Install | Includes Hardware | Overall Dimensions - 13L x 6.6W x 12.6H.
  • The B&M MegaShifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that has been one of the most popular automatic shifters of all time. The MegaShifters positive ratcheting function will not allow you to over shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track..
  • The look and feel of the T-handle and accordion style shift boot really shows off the racing heritage of the MegaShifter. Other features include a black console that you can trim to fit your vehicle floor for a perfect fit, 5 foot shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything....
Check Stock

Dewhel Shift KNOB Boot Retainer/Adapter for Manual Gear Shifter Lever 10X1.25 (Red)

  • Made from aircraft grade billet aluminum.
  • Takes up the space between the bottom of your shift knob and the top of your shift boot for a nice aesthetically pleasing affect. This shift boot retainer adapter will allow you to buy any aftermarket shift knob of your choice and say goodbye to your ugly OEM shift knob. The shift boot adapter is meant to be used on MANUAL Gear Shifter Lever TRANSMISSIONS (ONLY)..
Check Stock

DEWHEL Shift KNOB Boot Retainer/Adapter for Manual Gear Shifter Lever 10X1.25 (Black)

  • Made from aircraft grade billet aluminum.
  • Takes up the space between the bottom of your shift knob and the top of your shift boot for a nice aesthetically pleasing affect. This shift boot retainer adapter will allow you to buy any aftermarket shift knob of your choice and say goodbye to your ugly OEM shift knob. The shift boot adapter is meant to be used on MANUAL Gear Shifter Lever TRANSMISSIONS (ONLY)..
Check Stock

B&M AUTO RATCHET QUICKSILVER SHIFTER,BLACK FINISH,UNIVERSAL 3 & 4 SPEED,12.23" SHIFT LEVER LENGTH,COMPATIBLE WITH GM TH350,TH400,700R4,200R4,4L60, 4L60E - 4L80E TRANSMISSIONS

  • Brand New B&M Automatic Ratchet Quicksilver Shifter, Black PVD Coating, Universal 3 & 4 Speed (Part #81683).
  • The QuickSilver features a black PVD coating. Features a reverse lockout that meets NHRA & IHRA safety regulations. The chrome bezel, shift stick & black knob all feature a black finish that blends nicely with the console & the shift boot. It includes a lighted gear position indicator in the bezel, a micro-switch for back-up lights & a neutral safety switch preventing accidental starts when in gear..
  • The console shifter kit includes a 5-foot long performance shift cable, cable brackets, trans-shift levers & all required hardware along with detailed easy step-by-step install instructions. Compatible with GM TH350, TH400, 700R4, 200R4, 4L60, 4L60E - 4L80E transmissions (w/o PRNDL switch), Ford C4, C5, C6 & Mopar A727 & A904 transmissions right out of the box. Bracket & Lever kits available separately for other 4-speed auto transmissions..
  • Specs: Application: Universal | Backup Light Switch: Yes | Brand: B&M | Cable End (Shifter): Single Eylet | Cable End (Transmission): 10-32....
Check Stock

1979-2004 Mustang Lower Shift Boot with Metal Support Bracket and Mounting Hardware

  • Fits ANY 1979-2004 Mustang w/ Manual Transmission.
  • Exact reproduction of 2003-2004 Mustang lower shift boot.
  • Better shift movement & clearance than factory shift boot.
  • Includes 4 clip nuts and 4 bolts to attach the lower shift boot to the transmission tunnel.
Check Stock

OriginalEuro Euro Fender Flares Wheel Arch Moulding Trim Spoiler for VW Golf Jetta MK3 3 Vento

  • Fitment---- This gear shift knob gaiter boot is suitable for Golf 3 for Jetta MK3 1991-1998. The size is about 28 * 17cm/11 * 6.7in. Please confirm....
  • High Quality Gear Shift Knob Gaiter---- This gear shift knob gaiter boot cover is made of high-quality ABS & artificial leather materials,....
  • Exquisite Workmanship---- The gear shift knob gaiter boot has exquisite workmanship, and the classic black modeling design brings cool style to your....
  • Additional Protection---- This 5 speed gear knob and gaiter full kit also has the function of dust prevention, which can prevent sundries from....
  • Easy to Install---- The car gear shift knob boot gaiter can be installed directly and is easy to install. Give your gear knob a brand new look. A....
Check Stock

Wooden Gear Shift Knob Shifter Knobs with 3 Adapters Manual Stick Shifter Round Ball Universal Fit for Honda Acura Mazda Mitsubishi Nissan Infiniti Lexus Toyota Scion BRZ Hyundai Ford Jeep et

  • Material: wear resistant microfiber leather with ABS wood surface..
  • Size: 10cm*5.2cm*4.2cm - Detail Dimensions show in the picture..
  • Fits most Automatic Transmission shifters with 8mm thread diameter size (M8 x 1.25). The compatibility list shown in the picture is not fully complete so if your car model has an automatic transmission gear changer and has 8mm knob thread diameters size and has no boot cover or release button, it will most likely fit, please also check our size before buying!.
  • Very good quality and unique design, perfect replacement! Easy to install, just remove the old part and install the new part. (Please press the shift knob with force and twist it when you install the new part!).
  • This shift knob can just fit 8mm shift stick,not for 10mm or 12mm. We mark the size in the picture already,please check the size to see before buying!!.
Check Stock

Dewhel Shift KNOB Boot Retainer/Adapter for Manual Gear Shifter Lever 12X1.25 (Black)

  • Fit for most Manual Subaru Impreza , Susuki Samurai ,Toyota Supra 1993 -98 (JZ) ,Toyota MR2 1991-95 (SW20),Toyota Corrola,Toyota Celica-Tercel,Toyota Camry,Toyota Trucks,Geo tracker,Ford Mustang (Newer manual),Skyline (R34),Scion xA xB and tC(excluding Scion tC and xB 2008) etc.
  • Made from aircraft grade billet aluminum.
  • Takes up the space between the bottom of your shift knob and the top of your shift boot for a nice aesthetically pleasing affect. This shift boot retainer adapter will allow you to buy any aftermarket shift knob of your choice and say goodbye to your ugly OEM shift knob. The shift boot adapter is meant to be used on MANUAL Gear Shifter Lever TRANSMISSIONS (ONLY)..
Check Stock