ReviewsAutomatic Stainless Steel Nozzle

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

Nozzle Cleaning Kit: you will get 32 MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....

Check Stock

mistcooling 24\ OSC Misting Fan Kit - High Pressure - (3 Fan)

24 Inch Fans 1500 PSI Misting Pump Six Nozzle Stainless Steel Misting Fan Ring 25 Ft High Pressure Flexible Tubing Stainless Steel Misting Nozzles Stainless Steel ¼ Inch Clamps Easy to Install DIY Install.
Misting Pump Features : Maximum Pump Speed (0.15/ 0.30 gpm.): 1800 RPM Maximum Inlet Pressure: 100 PSI Minimum Inlet Pressure: (Based on setting on Pressure switch) or Flooded if Pressure switch is bypassed Maximum Outlet Pressure: 1500PSI Maximum Flow: 0.15 GPM, 0.30 GPM (Refer to manufacturing label on pump) Full load Amps. (0.15/ 0.30 gpm.): 1.38 Amps. /2.15 Amps Voltage: 110V/ 220V AC (Refer manufacturing label on the pump) Noise Level: 75 DB. Maximum Fluid Temperature: For Room Tem.
Outdoor Fan Features : "Size: 24” Color: White RPM: 1110, AMPS: 2.65, CFM:9100 3 speed Pull chain Stainless Steel hardware with Durable Corrosion resistant finish Motor with thermal Overlade protection industrial Grade aluminum blade 10 Ft Heavy Duty cord with cord wrap Quiet operation For indoor/ Outdoor Use Osha Approved Grill ".
Stainless Steel Ring Features Made with Industrial Grade 3/8'' Rigid Stainless Steel 316 Compatible with all High and Mid Pressure Mist Pumps Pre-threaded nozzle slots for 10/24 Thread Rated for up to 2000PSI Attaches to any wall mount, ....

Check Stock

3D Printer Part, 5PC 0.4mm Brass Extruder Nozzle Print Head+ 5PC 30mm Length Teflon Throat Tube+ 5PC Heater Blocks Hotend for Anet A8/A6 3D Printer

Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm.
a set of 25pcs printer nozzles，wrench and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle..
Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original..
Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging..
Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother..

Check Stock

Jiffy Pro-Line Commercial Clothing Steamer Metal Steam Head with Hose in Pink

Pink304 stainless steel internal boiler tankNo water lines that could become clogged with hard water deposits1 gal / 3.79 L self-contained water tankSight gauge for quick view of water level and sediment buildupColor-coded high temperature wiringFusible link with automatic shut-off for safety.

Check Stock

32PCS Mk8 Nozzles 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.4mm,Compatible with CR-10 Ender 3/ V2 Ender3 pro,Prusa i3

Value for money: 10 pieces stainless steel nozzles and 16 pieces brass nozzles,5 nozzle cleaning needles,1 Nozzle Spanner,possesses 0.2 mm,0.4....
High precision: the inner wall of the 3D printer extruder nozzle is smooth and has no burrs, its viscosity coefficient is small, and extruder nozzle....
Premium material: Our MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material....
Good performance: this MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be....
Extensive Compatibility: Outer Thread M6，Input Diameter 1.75mm ,these high temperature pointed wear resistant nozzles are compatible with MK8 hotend....

Check Stock

Hicello Stainless Steel Fountain Nozzle, 3/8\ Pond Sprinkler Spray Head, Adjustable Pond Sprinkler Nozzle, Garden Column Water Spray Head

【Excellent Performance】With stainless steel fountain nozzle effect, water and air are suctioned in, mixed intensively and accelerated into the air, forming an impressive soft flowing fountain..
【Premium Quality】The pond column water spray head is made of quality stainless steel material, which is corrosion resistant and durable with a long service life..
【Scientific Design】The jet angle of stainless steel spiral nozzle is generally 120 degrees with smooth flow paths, which can minimize the liquid blocking so that the liquid reaches the maximum flow..
【Wide Application】The pond sprinkler head is widely used in the courtyard, garden, lawn, green belts and another small area of agricultural spray irrigation..
【Product Details】The connection size of fountain nozzle: G2/8(DN10, 16mm). Nozzle size: approx. 56mm/2.20inch. Pressure: 30-50Kpa. Amount of water: 5-8 m3/H. Spray height: 0.5-1.0M. Cover the diameter: 1.6-2.0M..

Check Stock

3D Printer Nozzles 26PCS Hardened Steel and Brass MK8 Nozzles 0.4MM with Cleaning Tool Kit for Makerbot Creality CR-10/ Ender 3/5 Compatible with All 1.75mm PLA ABS 3D Printer

MK8 nozzle Parameter: Input diameter 1.75mm.
Wide compatibility :0.4mm nozzlethe input diameter is 1.75mm, m6 thread, suitable Compatible with 3D printer Makerbot Anet A8, MK8 Reprap Prusa I3,....
Value for money: package comes with 4 pieces of hardened steel nozzles, 12 pieces brass nozzles, 5 nozzle cleaning needles, 1 Nozzle Spanner , 1 Box....
Premium material : MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material is....
Cleaning needles ,wrench : 5 Flexible stainless steel needles with a of are used to clean 3D printer extruder hot end nozzle clogs and other hard to....

Check Stock

Manual Potato Peeler Multifunctional Vegetable and Fruit Peeler Kitchen Tool Three in One Peeler Glass Bitters Bottle Japanese

Cocktail Peeler Juice Begonia Peeler Potato Peeler Left Handed Japanese Gadgets for The House Electric Grater Electric Fruit Potato Peeler Peeler for Old Fashioned Automatic Potato Peeler Replacement Super Peeler Carrot Peeler Stainless Thin Baby Food Peeler 5 Seconds Peeler Potato Peeler Gloves Cheese Peeler Masher Peeler Vegetable Peeler Kitchen Peeler Soft Fruit Peeler Electric Food Peeler Stainless Steel Corn Peeler Peal Co 9 Kid Peeler Cut And Keep Potato Peelers Automatic Peeler for.
Japanese Home Gadgets Fruit Peeler Potato Peeler Stainless Steel Electric Fruit Peelers for Kitchen Food Peeler Electric Garlic Skin Peeler Vegetable Brush Soup Cubes Storage Peeler Peeler Set Stainless Steel Mixing Bowls with Handles Finger Peelers for Kitchen Cocktail Fruit Peeler Grape Peeler for Skin Ceramic Potato Peelers for Kitchen Stainless Steel Y Peeler Potato Peelers Electric Automatic Potato Peeler Electric Tomato Peeler Electric Gift for People Who like to Cook Finger Peeler.
Cheese Shder Vegetables Peelers Lefty's The Left Hand Store Metal Peeler Ceramic Grater Japan Potato Masher Stainless Steel Cocktail Garnish Peeler Veg Peeler Left Handed Japanese Kitchen Gadgets Economy Peeler French Log Peeler Vegetable Peeler Stainless Steel for Kitchen Peeler fo....

Check Stock

LEM Products 468 Jerky Cannon,Silver/Black

Included: Two stainless steel nozzles (1 3/16" x 1 3/16" flat jerky nozzle and 1/2" ID round snack stick nozzle).
Two bags of seasoning (Jerky & Snack Stick).
Heavy duty plastic piston with a stainless steel rod and plastic coated steel handle.

Check Stock

Brand-New MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

100% Brand New and All parts are tested and quality controlled prior to shipment..
Compatible with: MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle..
Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
Package includes: 1 piece 0.4mm nozzle with M7 thread,1 piece throat with 1.75mm PTFE tube , 1 piece aluminum heater block as shown in the pictures..

Check Stock

WeldingCity 2-pk Gas Nozzle 21-50-F (Flush Tip) 1/2\ for Lincoln Magnum 100L and Tweco Mini/#1 MIG Welding Guns

【Craftsmanship】 The welding gun nozzles are processed by exquisite craftsmanship, and the surface is fine and smooth, and the high-quality speed welding nozzle is more practical..
【316 Stainless Steel】 Comparing to other material plastic welding nozzle, such as 304 stainless steel, 316 stainless steel is higher grade and better for rusting resistance, corrosion resistance, strength, welding, and heat resistance..
【Performance】 The nozzle has stable performance, is not easy to oxidize and deform, has strong high temperature tolerance, is not easy to be polluted, and has a long service life..
【What Do You Use the Welding Kits In】 Arc Welding nozzles and tips are suitable for hot air hand tools such as hot air welders, heat guns. Good replacement nozzle for vinyl heat gun..
【Widly Applications】 This hot air welding gun nozzles can be used to weld ABS, PE, PP, PVC and other plastic plates, professional and practical. Suitable for a wide range of work including plastic fabrication, plastic welding, civil engineering, geomembrane, bumper repairing, roofing and vinyl floor welding etc..

Check Stock