ReviewsAutomatic Sump Condensate Pump

HVAC Premium Condensate Removal Pump – Tank Pump 1.1L RTP15WS115L with 3/8' x 15' Pipe – Automatic Safety Switch Sensor - 115V/60HZ

HVAC Condensate Removal Pump With Automatic Switch – Automatically scans, detects, and collects/removes the condensate from HVAC or Air Conditioning Equipment, dehumidifiers, furnaces, condensing boilers, and virtually anywhere a condensing pump is necessary. Suitable for Ducted Units.
Pump Gallon is made of Flame Retardant ABS plastic, Motor Shaft is made of High Quality Flame Retardant Metal that does not corrode, and the Tank Cover is also made of High Quality Flame Retardant Metal.
Pump includes Automatic Safety Switch which can be wired to an alarm to warn of possible tank overflow.
Voltage is 115V/60Hz – See below in description for all TECHNICAL SPECIFICATIONS.
100% Satisfaction Guaranteed – Don’t worry you’re covered by our 100% money back guarantee no questions asked..

Check Stock

Submersible Clean/Dirty Water Sump Pump 1.5HP w/water level sensor (4 ON/OFF positions, no external float switch) 4860GPH, 26'Head, Thermal Protector, Stainless Steel, Copper Winding - Schraiberpump

Dirty water sump pump. With High Flow . This submersible water pump.
is sometimes referred to as a sub pump, utility pump, aquatic pump, pool suction pump, or sump pump. Is typically used in a basin which is in your basement, garage, garden, or yard. It will automatically turn on and off when there is water. That is literally the whole point. This High Flow auto sump pump does not have an attachment for a Garden Hose. Typically these are permanently or semi-permanently installed. So you wouldn't want to waste your garden hose..
New water sensor technology replaces old float switch systems making it fully automatic..
4 adjustable start and stop positions for the sensor, when the sensor gets wet it starts the pump, when it gets dry it stops it..
High quality stainless steel casing. Pumps Starts Automatically between 7.5 & 11 inches..
2 year warranty with us directly. See Manual for our phone number - Premium Pumps USA.

Check Stock

VEVOR Condensate Pump, 6.6 ft/2 m Lift, 110V Removal Drain Pump with 0.63 Qt/0.6 L Water Tank, 5W Automatic Condensation Pump with 100 L/H Flow, for Ice Maker Air Conditioner HVAC Dehumidifier Furnace

0.6 L Water Tank & Efficient Flow: Our condensate pump features a 0.63 Qt (0.6 L) water tank, sufficient to hold the amount of water that needs to be discharged from your ice machines. The water flow rate reaches 105.67 Qt (100 L) per hour to ensure efficient & timely drainage. Thus, a dry environment can be provided for the ice cubes, and you don't need to worry about them melting too fast..
6.6 ft Lift for Different Heights: Our condensate removal pump has a high water lift of 6.6 ft (2 m), from the comfort of which it can be connected to commercial ice makers or air conditioners of varying heights. You can place it right on the floor or tabletop and hang it on the wall..
5W Motor & Low Noise Running: A 5W motor is equipped on our compact condensate pump (7.1"x3.9"x2.6" / 180x100x66 mm in dimensions). The sound volume is about 22 dB, boasting high performance but low noise (p.s. the normal conversation volume is 40-60 dB). It will not disturb your daily life. Besides, the ventilation holes dissipate heat quickly, and the dampening feet decrease noise and enhance its stability..
Plug and Play with Power Cord: Our condensate pump is designed with automatic work and stop. When the water inside reaches the lower probe, it will start working.

Check Stock

The Prophecy Vol. 2

AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor.
BUILT TO LAST: stainless steel motor shaft, thermal overload protected motor.
CSA certified to US and Canadian standards.
PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord.
maximum water temperature: 140 F, equipped with safety switch.

Check Stock

Float Switch for Sump Pump - 6-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
ADJUSTABLE TETHER of its 6-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..

Check Stock

Float Switch for Sump Pump - 10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
ADJUSTABLE TETHER of its 10-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..

Check Stock

Little Giant Select Series LG-S50T 115-Volt, 1/2 HP, 4300 GPH Cast Iron Sump Pump with Tethered Switch, Blue, 14942675

APPLICATIONS: This automatic, heavy duty, cast iron sump pump with tethered switch is ideal for use in residential sump systems or emergency water removal applications.
AUTOMATIC PUMP: activates when water reaches 12 to 14 inches, shuts off when water drops to 4 to 6 inches.
piggy-back design allows switch to be overridden for emergency water removal or testing.
BUILT TO LAST: rugged cast iron volute, housing, motor cover and non-clog type impeller is capable of passing 3/8-inch diameter semi-solids.
also features a carbon/ceramic shaft seal.
ENERGY-EFFICIENT MOTOR: Permanent Split Capacitor (PSC) motor, 115 Volts, 5.3 Amps, 507 Watts, 60 Hz., thermally protected.
PUMP SPECIFICATIONS: 1.5-inch FNPT discharge, 10-ft. power cord, 4300 GPM at 0-ft. lift.
5.5 inches x 8.0 inches x 10.5 inches high.

Check Stock

Little Giant 506160 6-CIA-ML 1/3 HP 2760 GPH 115-Volt Low Level Sump Pump, Blue

AUTOMATIC SUBMERSIBLE SUMP PUMP: designed for compact sump systems with integral diaphragm switch activates when water reaches 4 to 7 inches and shuts off when water drops down between 1.5 and 3.5 inches.
BUILT TO LAST: Epoxy-coated cast iron housing.
nitrile/carbon/ceramic mechanical shaft seal.
CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
APPLICATIONS: designed for compact sump pump systems and general water transfer application. Must sit in water to activate the switch..

Check Stock

Aquastrong 1/38HP 85 GPH HAVC Condensate Pump, 115V/230V, Automatic Safety Switch, AC Condensate Removal for Air Conditioner, Furnace, Dehumidifier, 3.3' Power Cord

High Performance: Automatic condensate pump features an efficient thermally protected motor, providing quick draining and quiet operation. It can move water up to 85 GPH or lift water up to 20ft vertically. Reliable hall switch ensures auto operation and long service life. Ideal for removing condensate from AC units, furnaces and dehumidifiers.
Hi-level Safety Switch: Two signal lead wires can be wired directly to HAVC appliances for safety switch - when the sensor detects high water levels in the reservoir, the safety switch will be triggered and shut off the appliance automatically to prevent possible tank overflow. Please make sure to install the pump vertically on a flat surface or wall.
Compact & Durable: Vertical centrifugal pump design with removable 1/2 gallon reservoir, easy to operate and maintain. Solid plastic construction ensures abrasion and corrosion resistance. Five 1'' inlet ports allow for connection to multiple equipments. 2/5'' O.D. barbed outlet with built-in check valve fits 1/4'' to 3/8'' tubing. Easy to install.
Auto & Safe: Condensate tank pump will auto start when the water level reaches 2.28'' and auto stop by 1.26''. 3.3ft UL power cord with 3-prong plug ensures safety and convenience. It is necessary to clean the pump reserv....

Check Stock

Little Giant VCMX-20ULS-C 115 Volt, 1/30 HP, 84 GPH, Automatic Condensate Removal Pump, 6-Ft. Power Cord, Safety Switch, Anti-Sweat Sleeve, Blue, 554542

APPLICATIONS: ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment.
COMES EQUIPPED WITH: external test/run level.
galvanized steel "quick install" wall mount bracket.
INCLUDES OVERFLOW DETECTION SWITCH: dual function NO and NC operation.
shuts off equipment or can be attached to audible or visual alarm or security system.
AUTOMATIC OPERATION: vertical centrifugal pump design activates when condensate reaches 2.2 inches.
shuts off when condensate falls to 1.6 inches.
SPECIFICATIONS: 1/30 HP, 115 Volts, 60 Hz., 1.5 Amps, 93 Watts, 3/8-inch discharge, check valve included, 84 GPH at 1-ft. lift, 21 ft. shut-off, maximum 9.1 PSI.

Check Stock

DIGITEN Auto Top Off System, Smart ato System, Fish Tank Sump Water Filler Refiller, Automatic ATO System for Aquarium with Pump

【Simple, Complete, Smart Automatic Top Off System】 aquarium automatic water supply system, super easy installation and maintenance. Suitable for aquariums up to 5/8"(16mm) thick, durable PC material holder to prevent move, adjustable bracket on holder make different water levels possible..
【Relay Control】 precise dual float water level sensor for overfilling protection. When the water goes below the minimum water level , the power will be activated, the pump automatically works, and cut off once the water level reach to maximum. The second float ball will work when the first float ball fails..
【Siphon Break】 The siphon break is optional installation part. It is recommended that the water level of display tank be higher than the reservoir, and DON’T leave the end of the water supply pipe in the water, otherwise, it will siphon after the pump shuts off, if so the siphon break must be installed at the end of the water supply pipe..
【Plug-and-Play with all parts included】 Everything you need is included, it will also come with a pump and a ETL listed power adapter. Safely keep sump water levels stable, no....

Check Stock