ReviewsAutomatic Terminal Machine

Mini Spot Welder, Battery Handheld Spot Welder 6 Gear Adjustable Mini Spot Welder Machine with Spot Welding Pen and Nickle Sheet for Battery for Craftsman/Beginner (Spot Welder A)

  • Take note to fully charge the battery before use* Made of aluminum alloy material, with anodic oxidation surface, wear resistant and beautiful. It can welding hundreds of welding points on commonly used nickel-plated sheets within 0.1mm-0.12mm..
  • 6 gears of output power adjustable, welding more accurate. Output gears indicator light(red), the number of indicator light corresponding the output gears. Equipped with electricity indicator light(blue), different numbers to shows different electric quantity, 1 light(5-25%,flash003c5%), 2 lights(25-50%), 3 lights(50-75%), 4 lights(75-100%)..
  • Automatic mode and manual mode adjustable, with output mode indicator light, automatic mode-left yellow light turn on, manual mode-right yellow light turn on..
  • USB-C interface 2A input, 6700mAh spot welding machine can be fully charge within 3 hours. 400mm long spot welding pen for flexible operation. Mainly used in the welding of nickel sheet of cylindrical battery, NI-MH battery, nickel cadmium battery etc..
  • Gold-plate terminal welding pen, with fine conductivity and low contact resistance, quickly detachment and easy carring. 2mm thicken pure copper strip, supperlow internal resistance to increase overcurrent capability..
Check Stock

OIIKI 10 Sets 2-Pin 5.08mm Pitch Mount Screw Terminal Block, Straight Plug-in 2-Pin (2 Pole) Screw Terminal Block Connector, Pluggable Male Female Phoenix Type Connector- Green

  • Package Included - 10 Set x 2-Pin Screw Terminal Block.
  • Application - The 5.08mm pitch Screw terminal block is widely used in electronics, communication equipment, instruments, calculator, automatic control system, domestic appliance and warning devices, etc..
Check Stock

Battery Cable wire Lug Crimping Tool for AWG 8-1/0 terminals with Cable Cutter and 20PCS Tubular Ring Terminal Connectors and 20PCS 3:1 Dual Wall Adhesive Heat Shrink Tubing

  • Crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. This tool has widely application in automatic electronics work..
  • The professional cable terminal crimping tool has 6mm²/10mm²16mm²/25mm²/35mm²/50mm² (Similar to AWG 8，6，4，2，1/0) wire size crimping, using rotating heads with a spring loaded locking pin to keep the heads in place..
  • Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs..
  • The handle of the wire crimper is long for 10 inch and wrapped with soft rubber, ergonomic lever structure design can increase friction and help you use less effort when crimping..
  • The crimper set contains 20PCS ring terminal connectors(AWG8-5/16,AWG6-5/16,AWG6-3/8,AWG4-5/16,AWG4-3/8) save your time and money to buy other connetors..
Check Stock

Twidec/3Pcs Waterproof Heavy Duty Toggle Switch 12V DC 30A DPDT 3 Position 6 Pin ON-Off-ON Switch with Weatherproof Boot Cap Cover for Car Boat with Terminal KL-C203-MZ

  • Feature: The waterproof toggle switch is made of metal and bakelite.The shaft, bracket and terminal of the switch are made of copper and nickel plating material. The main body of the switch is made of bakelite material..
  • 30A 12VDC；Each terminal will be equipped with a wiring terminal, which makes wiring more convenient..
  • Mechanical life: more than 50.000 cycles. Electrical life: more than 10, 000 cycles,Total Size(Approx) : 30x20x60mm/ 1.2" x 0.78" x2.3"(L*W*H).
  • Easy to install: Mounting hole diameter: 12mm. Each of the terminals has a machine screw for quick connections, but also easy to be soldered.
  • Package content: 3 X Toggle switch, 3 X High Quality Waterproof Cover ,18 X Terminal.
Check Stock

Reachout Remote Control, Communications & File Transfer

  • Remote Control, File Transfer and General Communications.
  • AutoXfer(TM) Automatic file transfer and synchronization quickly and easily..
  • Multi-wait: Allows host to wait on two devices.
  • ISDN: Supports ISDN CAPI2.0 ISDN Terminal Adapters and Windows 95 ISDN accelorator pack.
  • Quick Start Wizards. Step-by-step wizards walk you through set up and configuration.
Check Stock

Schlage PS902 Power Supply 2 Amp, Satin Chrome

  • Ideal for most automatic door applications, as well as air lock and other security applications..
  • 15 operating modes, with sub-modes. Selection and configuration with 3 push buttons.
  • Selectable time delays, with delay on input activation..
  • Clear plastic case provides better protection of circuit board and easy mounting..
  • Larger terminal strips allow larger wire gauge, or more conductors to be connected..
Check Stock

Twidec/3Pcs Waterproof Heavy Duty Toggle Switch 12V DC 30A SPST 2 Position 2 Pin ON/Off Switch with Weatherproof Boot Cap Cover for Car Boat with Terminal KL-C101-HMZ

  • Feature: The waterproof toggle switch is made of metal and bakelite.The shaft, bracket and terminal of the switch are made of copper and nickel plating material. The main body of the switch is made of bakelite material..
  • 30A 12VDC；Each terminal will be equipped with a wiring terminal, which makes wiring more convenient..
  • Mechanical life: more than 50.000 cycles. Electrical life: more than 10, 000 cycles,Total Size(Approx) : 30x15x52mm/ 1.2" x 0.58" x2"(L*W*H).
  • Easy to install: Mounting hole diameter: 12mm. Each of the terminals has a machine screw for quick connections, but also easy to be soldered.
  • Package content: 3 X toggle switch, 3 X High Quality Waterproof Cover ,6xTerminal.
Check Stock

Singer Sewing Machine Foot Pedal Replacement by Enduro – Variable Speed Foot Operated Control Pedal for Domestic and Imported Sewing Machines

  • Foot operated speed control pedal fits many popular brands of portable electric sewing machines..
  • CHECK THE PLUG BEFORE BUYING! If the plug on your existing pedal doesn't match the second photo on the left, this pedal will not work..
  • The plug end on this pedal is 1.25" wide and 3/8" tall, it has three evenly spaced terminal plugs in a horizontal position and the plug body is rounded around each terminal..
  • The cord is 52" long from the pedal to the machine, and 76" from the machine to the 110V wall plug..
  • The wall outlet plug is a standard Type-A, 110 volt, North American style two-prong plug..
Check Stock

Solsop Battery Cable Crimping Tool from AWG 8, 6, 4, 2, 1, 1/0, Battery Cable Lug Crimper for Heavy Duty Wire Lugs, Battery Terminal, Copper Lugs AWG 8-1/0

  • The battery terminal crimper has 6mm2/10mm216mm2/25mm2/35mm2/50mm2(Similar to 6 dies of 8, 6, 4, 2, 1, 1/0 AWG) using rotating heads with a spring loaded locking pin to keep the heads.
  • Operating Way - Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.
  • Battery cable crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure, which this tool has widely application in automatic electronics work.
  • Comfortable Operation Handles - Comfortable grip with anti-slip surface saves strength and improves user's experience.
  • Durable Material - Made of high quality carbon steel is more sturdy and durable for heavy crimping works.
Check Stock

Solsop Battery Cable Crimping Tool from AWG 8, 6, 4, 2, 1, 1/0, Battery Cable Lug Crimper for Heavy Duty Wire Lugs, Battery Terminal, Copper Lugs AWG 8-1/0

  • The battery terminal crimper has 6mm2/10mm216mm2/25mm2/35mm2/50mm2(Similar to 6 dies of 8, 6, 4, 2, 1, 1/0 AWG) using rotating heads with a spring loaded locking pin to keep the heads.
  • Operating Way - Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.
  • Battery cable crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure, which this tool has widely application in automatic electronics work.
  • Comfortable Operation Handles - Comfortable grip with anti-slip surface saves strength and improves user's experience.
  • Durable Material - Made of high quality carbon steel is more sturdy and durable for heavy crimping works.
Check Stock

J Bryant Gym Machine Accessories for 5mm Cable Ball Stopper Interface Port Components Fitness Equipment Wire Rope Port Joint Replacement Parts for Home Gym Machine Use

  • SIZE: The ball is 4cm diameter, with 1cm hole. The bowl-shape plate has a 38mm diameter, with 7mm hole. The metal eyelets terminal is used for cables with a diameter of 5mm and an internal steel wire diameter of about 3mm. The wire rope clamp is for a 5mm rope or cable..
  • DURABLE MATERIAL: The ball is made of high quality plastic, the bowl-shape plate is made of metal alloy. The eyelet terminal is made of metal alloy. The wire rope clamp and thimble are made of 304 stainless steel..
  • USE: Use a hydraulic crimper (plier) tool to link the cable with the metal eyelet terminal. The ball, bowl-shape plate and the terminal.
  • you can use as ball stopper set on cable machine. Put the wire rope thimble together with the clap and cable, it can use as clothesline or fence line, the thimble and clamps are wear-resistant..
  • You can choose the appropriate connector type according to the training equipment or sports environment, which is convenient and practical..
Check Stock