ReviewsAutomatic Test Tool

Bluelab PENCON Conductivity Pen and Digital TDS Meter, Water Tester for Temperature and Nutrient (CF, EC, PPM 500, PPM 700), TDS Testing Kit for Hydroponic System and Indoor Plant Grow

【How to use calibration】Press CAL for 5 seconds to enter the calibration mode, press in turn to select the powders corresponding to 6.86, 4, and 9.18 to complete the calibration..
【Mini Size】The mini size ph meter we designed allows you to easily put it in your pocket, so you can take measurements anytime, anywhere. It can help you test it whether you take it to the pool, on a trip, to the beach or camping..
【Family Essentials】As a tool to improve the quality of life. Can be used to test drinking water, swimming pools, PH balance in aquarium, RO system, spa or hydroponics. Basically all the environments that need to test PH value can use this tester to get accurate data..
【Easy to use】turn on the switch,put the probe into the water and stir (make the small glass ball fully contact the liquid) and the value can be read when the value is stable..
【Automatic temperature compensation】There is no need to care about the temperature of the liquid being measured. The PH meter has an automatic temperature compensation function, which can be adjusted according to the water temperature and water quality..

Check Stock

Pneumatic Clamp 1/8\ Intake Interface High Strength Pneumatic Hold Fixture for Welding

The operation is simple, and it is easy to realize automatic control, and the clamping type work can be performed without using artificial force..
It can stably ensure the machining accuracy of the workpiece. When the workpiece is clamped with pneumatic clamps, the positional accuracy of the workpiece relative to the tool and the machine tool is guaranteed by the fixture, which is not affected by t.
It can expand the scope of use of machine tools and realize multi-function of one machine. The use of special pneumatic clamps can change the purpose of the original machine tool and expand the scope of use of the machine tool to realize multi-function o.
The pneumatic reaction speed is fast and the testability is high, so the test time is shortened and the production efficiency is improved in the production process..
It can reduce the auxiliary working hours, improve the labor productivity, and clamp the workpiece with the pneumatic clamp. The workpiece can be quickly positioned and clamped without the need of alignment, which significantly reduces the auxiliary work.

Check Stock

Diabetes Testing Kit,Bioland Blood Glucose Monitor Kit,100 Test Strips 1 Lancing Device,100 Lancets and 1 Carrying Case No Coding,LCD Lights Display

❀5sec FAST RESULTS❀ Put one drop of blood on the glucose monitor test strip and the result will show within 5 seconds..
❀500 reading memory❀Glucose meter memory storage is up to 500 readings and it can display continuous 7/14/21/30/60/90-day average. It will help....
❀Automatic switching on/off❀ Insert the test strips and the glucose meter can automatically operate. Blood sugar meter can auto pop out the test....
❀Small And Portable,Easy To Carry❀A diabetes testing kit that is small and portablet.You can take it with you anywhere and it's easy to check your....
❀Warm tips❀The blood glucose meter is only used as an auxiliary tool to help you monitor the blood glucose value at any time. Therefore, the final....

Check Stock

AUTOOL Ultrasonic Wave Fuel Injector Cleaner and Tester Automotive Fuel Injection Systems Cleaning Tools for All Petrol 6 Cylinder Vehicles Motorcycle

...tion, difficulty in starting, excessive emissions, and complete blockage of the injector. Cause damage to the engine, so the injector should be cleaned regularly..
【Digital Display】With the help of microcomputer control and digital display, the equipment makes possible automatic cleaning, testing injectors and real-time monitoring of the dynamic values..
【Automatic Cleaning and Testing】Fuel pressure control through microcomputer offers stable pressure control and largeadjustable range, which is suitable for all EGI vehicles and can help to achieve automatic cleaning and testing of injectors..
【Adopting Humanization Design】Automatic fuel draining through preset programs for some test items. Test liquid/detergent can also be drained by pushing a button on the control panel after the test.can make the system pressure fast restored to the default,The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle..
【Reverse Flush】Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector,and to moni....

Check Stock

2 in 1 Temperature pH Monitor Meter Tester Sensor Test Kit 0~14 pH Automatic Calibration BNC Electrode Probe for Hydroponics Aquarium Lab Testing Food Drinking Water pH of Saltwater/seawater

[Accurate Test] With a sensitive electrode sensor ph tester with 0-14.0 measuring range could read accurate pH level quickly and easily. This accurate pH tester Kit (0.01 Resolution) is so accurate that it could test accurately within ± 0.01 pH. Enclosed with detailed clear manual will show you how to use it..
[Automatic Temperature] This PH meter has built-in automatic temperature compensation system (ATC) which can accurately determine the PH value of the sample at any water temperature..
[Simple Calibration] Three kinds of pH buffer powder are included for conditions requiring recalibration, such as long period of inactivity..
[Power ] The display is powered by an alkaline 4 x AA battery. After about 5 minutes, it will go into power saving mode. Thus, it can have at least 3 months of battery life..
[Wide application] You can use this tool to monitor the pH and Temperature of any type of water may it be in your aquarium, swimming pool, spa, laboratories, hospitals, hydroponics, agricultural, industrial, and also field water analysis procedure..

Check Stock

VIVOSUN TDS Tester 3-in-1 TDS EC & Temperature Meter Ultrahigh Accuracy Digital Water Quality TDS Tester Blue

Multi-functional: Provides accurate and reliable test readings.
3-in-1 digital tds meter provides accurate readings for TDS (total dissolved solids)....
Useful Tool: Saves you money while protecting your health.
Home water test kit alerts you when it’s time to change filters to remove contaminants....
Easy to Use: Locks your reading making it easy to record.
Large, easy to read LCD screen and data-hold function makes reading and recording a snap.
Long Battery Life: Auto-off function saves on battery usage and our TDS meter has lower power consumption than HM TDS meter.
Measurement Range: 0-9990ppm, 0-9990µs/cm.
Accuracy: ± 2%, 0.1- 80.0°C, 32.0-176.0°F..

Check Stock

Circuit Breaker Finder Find Breakpoints, Automotive Circuit Tester with 75CM Test Lead, Electrical Wire Tracer Find Short Circuits, Circuit Tracer with Earphone & Handbag, Electrical Tester

【Quick Self-Test & Overload Protection】Before you test a circuit or component, the test light can perform a quick self-test to ensure your tool is in good condition. Equipped with overload protection, when the current exceeds 7A, the circuit tester will disconnect the current automatically and give you a buzzer prompt. You can test poor ground contacts directly. Note: This electrical tester can not be used for 110/220V systems, it is only used for DC 6-24V systems. Do not use on AC voltage..
【Automatic Reset Test Light】When the circuit breaker trip is detected, the power circuit probe tester will sound a prompt to remind you that there is a short circuit problem. Then it will automatically reset within 3 to 5 seconds(the prompt sound will automatically turn off), so you can retest or go to test other places..
【Easy Operation Circuit Tester】Unroll the leads. Clamp the red clip of the power circuit probe tester to the positive terminal of the vehicle's battery. Clamp the black clip to the negative terminal of the vehicle's battery. After a simple hook-up of the circuit tracer to the vehicle's battery, automotive technician can conduct a positive or negative battery current to the tip by rocking the power sw....

Check Stock

Launch Creader VII+ OBD2 Scanner ABS SRS Transmission and Engine Code Reader Diagnostic Scan Tool

...NG/AT/ABS/SRS DIAGNOSES: LAUNCH VII+ OBD2 scanner can easily access to the Engine, Transmission, ABS, and SRS to retrieve their DTCs, text or graphic live data stream and other ECU information. Once the detected problems are fixed, you can use this scan tool to clear the DTCs, and then the warning light will be off automatically..
ALL 10 OBD II TEST MODES: Equipped with FULL OBDII functions, this OBD2 scanner is not limited to reading and clearing DTCs, but also supports advanced live data stream for focusing on any suspicious or symptom-specific data parameters, as well as O2 Sensor test and EVAP system test for detecting their faults in time to avoid emission problems..
WIDE VEHICLE COVERAGE: You can use this OBD2 scanner to diagnose a wide range of vehicles even 12V diesel cars. The Full OBD2 Functions can be used for all vehicles compatible with OBDII & CAN protocols, and the Four Systems Diagnoses can be used for 2006 and newer vehicles. Notice: To confirm the diagnostic compatibility, please contact us via Q&A or email..
COMMONLY-USED FEATURES: This OBD2 scanner features “DTC Lookup” – to retrieve detailed DTC definition in seconds.
“Automatic Diagnostic Report” and “Data Playback” – to record the diagnostic informatio....

Check Stock

Enkelbruke Pneumatic Clamp, GH-12130 Professional Cylinder Pneumatic Hold Down Clamp, 230kg Clamping Force

FUNCTIONS -- The hold down clamp can not only reduce the intensity of labor of workers, but also help ensure the machining accuracy of the workpiece..
ESSENTIAL TOOL -- The toggle clamp is a essential clamping tool that can help achieve automatic control..
HIGH EFFICIENCY -- The cylinder pneumatic clamp can largely shorten the test time and improve the production efficiency..
230kg CLAMPING FORCE -- With a total length of 300mm and a maximum clamping force of 230 kg, the clamp helps to ensure the machining accuracy of the workpiece.
APPLICATION -- This pneumatic lever clamp is used for mass production, and the workpiece station that needs to be positioned and clamped can be used. It is commonly used in stations such as welding, gages, and molds..

Check Stock

Digital Multimeter AC DC Voltmeter Ohm Volt Amp Tester Continuity Battery and Diode Multi Tester with Set of Test Leads Probes Test Clips Dupont Wires Crocodile Clips Wire Stripper from Plusivo

Wide Range of Applications: can measure AC and DC voltage, resistance, and current, It can also test circuit continuity, battery quality, and diode....
High Quality Display with Backlight Function: features a high quality 3 ½ digits display with maximum display value of 1999 with automatic polarity....
Features Hold function that retains the last measured value, a kick-stand, silicone cover for protection.
low battery indicator icon displayed when....
Comes with Additional Items: set of test leads, normal and needle types of probes, test clips, dupont wire probes, crocodile clips, mini crocodile....
Satisfaction Guarantee: with 30-day manufacturer’s guarantee and lifetime customer support for customer’s satisfaction.

Check Stock

Pneumatic Clamps Pneumatic Clamp 300mm GH-12130 Professional Cylinder Pneumatic Hold Down Clamp

...atic Clamp provides a smoother operation during repeated clamping operations than manual clamps. The intake port size is M10.The maximum working pressure is 9Kgf / cm2 (0.9mpa) 100PSI, and the movable distance of the clamping rod is 60mm / 2.3in, The Pneumatic Clamping Tool operate easily, and it is easy to realize automatic control..
【Improve efficiency】This Pneumatic Hold Down Clamp is used for positioning, clamping workpiece station. It is powered by compressed air and has the characteristics of labor saving, energy saving and environmental protection. It can shorten test time,and improve production efficiency which reduce labor intensity of workers.Pneumatic clamp is easy to operate and easy to implement automatic control..
【Application】 This Pneumatic Lever Clamp is used for mass production, and the workpiece station that needs to be positioned and clamped can be used. It is commonly used in stations such as welding, gages, and molds.Pneumatic hold down clamp can shorten test time and increase production efficiency..
【Quality Assurance】: As a professional seller, we offer high quality products and thoughtful services. Each product must be strictly inspected to ensure reliable quality. Please rest assured to buy our products, I hope you ....

Check Stock