ReviewsAutomatic Tool change

Industrial Service Solutions Aftermarket Gardner Denver Aeon 4000 (1 Gal.) Compressor Oil | 1 Gallon | Replacement Lubricant | for Compressed Air Equipment and Systems

  • Mobil met 766 is used for tapping, threading, milling, gear shaving and shaping, broaching, planning, parting-off and automatic lathe operations.
  • Increased production resulting from longer tool life and reduced downtime for tool changes.
  • Improved surface finish, closer tolerances and reduced formation of built-up edge resulting in fewer rejects.
  • Cooler work pieces and increased feed rates possible for reduced operating costs.
  • Suitability for a wide range of severe machining operations on difficult steels.
Check Stock

Sesamee K440 4 Dial Bottom Resettable Combination Brass Padlock with 4-Inch Hardened Steel Shackle and 10,000 Potential Combinations

  • Set-your-own 4-digit combination for convenience and security.
  • 10,000 possible combinations which can be easily changed and set.
  • 2 inch wide solid brass case for superior security and weatherability.
  • Best used for job boxes and gang boxes, utility meters, substations, cable boxes, tool chests, boxes and cribs and lockers.
  • Shackle clearance is 4 inches and there are 4 dials.
  • Set your own combination 10,000 potential personalized optionsDescriptionCCL K440 Sesamee 4-Dial Resettable Brass Body with Brass Internal Parts is a set-your-own 4-digit combination for convenience and security. 10,000 possible combinations which can be easily changed and set. 2 inch wide solid brass case for superior security and weatherability. All brass internal locking mechanism. Tough heel and toe lever locking system. Hardened steel-chrome plated shackle. Automatic "0000" stop. Product of Taiwan and designed in Wheeling, Illinois. Best used for job boxes and gang boxes, utility meters, substations, cable boxes, tool chests, boxes and cribs and lockers. Shackle clearance is 4 inch. 4 dials. Carded packaging..
Check Stock

Makita XT704 18V LXT Lithium-Ion Cordless 7-PC Combo Kit 3.0Ah

  • Variable 2-speed 1/2" hammer Driver-Drill (0-600 & 0-1, 900 RPM) with Makita-built 4-pole motor delivers 480 in.Lbs. Of max torque.
  • Variable speed impact driver (0-2, 900 RPM & 0-3, 500 IPM) provides 1, 460 in.Lbs. Of max torque for a wide range of fastening applications.
  • 6-1/2" circular saw delivers 3, 700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. With battery.
  • Recipro saw provides 0-2, 800 SPM and features "tool less" blade change.
  • 4-1/2" cut-off/ angle grinder delivers 8, 500 RPM.
  • features automatic speed change technology that adjusts speed and torque during operation for....
Check Stock

DEWALT Angle Grinder, 7-Inch, 8,500 RPM, 4.9-HP (DWE4597) , Yellow

  • Anti-Rotation E-CLUTCH System of the angle grinder activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor..
  • High power 4.9 HP (maximum motor HP) 8,500 rpm motor of the metal grinder provides overload protection giving higher operating speeds under load.
  • Anti-Rotation E-CLUTCH System activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor of DEWALT angle grinder..
  • Anti-vibe side handle is a Perform and Protect feature that reduces the users exposure to vibration.
  • Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position.
  • Power-Off advanced electronic overload protection shuts the tool off before it reaches overload or burn-up.
  • Dust Ejection System increases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor.
  • Low-profile gearcase allows for work in tight areas.
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage.
  • 3-position side handle provides improved ergonomics for specific applications.
Check Stock

Makita 9565PCV SJS High Power Paddle Switch Angle Grinder, 5'

  • Variable 2-speed 1/2" hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 inches Lbs of max torque.
  • Variable speed impact driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 inches Lbs of max torque for a wide range of fastening applications.
  • 6-1/2" circular saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs.
  • Recipro saw provides 0-2,800 SPM and features "tool less" blade change.
  • 4-1/2" cut-off/ angle grinder delivers 8,500 RPM.
  • features automatic speed change technology that adjusts speed and torque during operation for optimum performance.
  • Includes - (2) 18V LXT Lithium-Ion batteries, rapid charger, XPH10Z, XDT11Z, XSS02Z, XRJ04Z, XAG03Z, DML185 and bag.
Check Stock

Bosch RH745 1-3/4-Inch SDS-Max Rotary Hammer

  • SDS-max bit system provides tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate.
  • Combination dual mode selector 2 modes of operation: rotary hammer and hammer only mode.
  • Variable speed dial provides accurate bit starting and controlled chipping applications.
  • Turbo Power feature delivers 10% more power in hammer only mode.
  • Service Minder light indicates when preventative maintenance is required.
Check Stock

Makita XT706 3.0Ah 18V LXT Lithium-Ion Cordless Combo Kit (7 Piece)

  • Variable 2-speed 1/2″ hammer Driver-Drill (0-600 & 0-1, 900 RPM) with Makita-built 4-pole motor delivers 480 in.Lbs. Of max torque.
  • Variable speed impact driver (0-2, 900 RPM & 0-3, 500 IPM) provides 1, 460 in.Lbs. Of max torque for a wide range of fastening applications.
  • 6-1/2″ circular saw delivers 3, 700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. With battery.
  • Recipro saw provides 0-2, 800 SPM and features “tool less” blade change.
  • 4-1/2″/ 5″ cut-off/ angle grinder delivers 8, 500 RPM.
  • features automatic speed change technology that adjusts speed and torque during operation for optimum performance.
Check Stock

BOSCH 11316EVS SDS-Max Demolition Hammer, Bosch Blue

  • Power: Featuring a 14.0 Amp Motor and Constant Response Circuitry for Soft Start, Constant Speed Under Load, and Protection Against Overload. The Bosch 11316EVS Provides 12.4 Ft. Lbs. of Impact Energy and No Load Bpm 900 1,890.
  • CONVENIENT: Featuring the SDS max bit system for tool free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. Vario Lock positioning locks chisel into 12 different positions for optimum hammering angles.
  • VERSATILE: With a variable speed dial, the tool allows for controlled chipping applications and can be adjusted to match the impact force with the material being removed.
  • RELIABLE: The Bosch 11316EVS features a Service Minder light to indicate when preventative maintenance is required.
  • COMFORT: This demo hammer weighs only 23 pounds and has a 360 degree auxiliary handle and a padded rear handle for added user comfort during extended periods of work.
Check Stock

USG Sheetrock 'The Dimpler' Drywall Screw Setter Bit - Reversible with Clutch

  • #2 Phillips bit sinks and sets screws to perfect finish depth..
  • Automatic clutch release eliminates tear-out of screws in drywall and stripping of screw heads and bits..
  • Replaceable Phillips bit tip can be changed when worn. No need to replace the entire tool..
  • Reversible with turn-to-lock feature for screw removal..
  • Made by USG Sheetrock - the Leading Brand in Drywall Hand Tools.
Check Stock

UNIGT Belt Changing Tool with Clutch Cover Removal Tool Kit Replacement for Polaris XP/RZR XP4 1000/RZR S 900

  • Belt changing tool help RZR owner to change a belt, the clutch tool can help you easy to remove the clutch cover.
  • Belt changing tool made by Solid Aluminum Alloy, the clutch tool is dismountable and flexible.
  • A must tool kit for your Polaris RZR: The RZR belt changing tool makes changing your belt easier,and speed up change belts,save the time of Polaris RZR owner.
  • Custom design: This rzr belt removal tool is custom made for Polaris XP/RZR XP4 1000/RZR S 900 etc almost all Polaris rzr belts.
  • Easy to use: the belt changing tool is with an ergonomic handle for a comfortable grip, it’s very easy to changing the belt. It can be rotated 360 degrees..
Check Stock

Pneumatic Clamp, Pneumatic Hold Down Clamp, 1/8\ Intake interface Metal Cylinder Pneumatic Clamp Hold, 50KG Clamp Force, for Positioning Clamping

  • The operation is simple, and it is easy to realize automatic control, and the clamping type work can be performed without using artificial force..
  • The pneumatic reaction speed is fast and the testability is high, so the test time is shortened and the production efficiency is improved in the production process..
  • It can stably ensure the machining accuracy of the workpiece. When the workpiece is clamped with pneumatic clamps, the positional accuracy of the workpiece relative to the tool and the machine tool is guaranteed by the fixture, which is not affected by t.
  • It can reduce the auxiliary working hours, improve the labor productivity, and clamp the workpiece with the pneumatic clamp. The workpiece can be quickly positioned and clamped without the need of alignment, which significantly reduces the auxiliary work.
  • It can expand the scope of use of machine tools and realize multi-function of one machine. The use of special pneumatic clamps can change the purpose of the original machine tool and expand the scope of use of the machine tool to realize multi-function o.
Check Stock