ReviewsAutomobile Engine Part

Tachometer Gauge,3.75 Car Universal Black Tachometer Gauge Blue Inter Shift Light 0-8000 RPM

Measurement：Used to measure the RPM of automobile engine，Measurement range is 0~8000RPM..
Apply to：Works on 1 2 3 4 5 6 7 8 cylinder gasoline vehicles or 1 - 2 cylinder new motorcycles.Adjustable shift light on face..
Gauge：Bring you a more cool engine tachometer, the backlight uses blue light, and gasoline cars add interesting auto accessories.After power-on, the....
Note:NOT suitable for diesel vehicles, Only for 12V petrol vehicles..
Package List:1 * 3.75" Tachometer Gauge+1 * Installation Instruction+1 * Package of fitting.

Check Stock

MIKKUPPA Small Inline Spark Plug Tester for Motorcycles Lawn Mowers Small Motor Vehicles

PERFECT FIT YOUR VEHICLES: From small engines like motorcycles and lawn mowers to cars, trucks, boat motors, this small engine spark plug tester tool works for all internal and external combustion engines that use spark plugs..
DIAGNOSE PROBLEMS QUICKLY: Use MIKKUPPA spark plug ignition tester for small engines and vehicles to quickly and easily diagnose ignition, engine problems and defects, and troubleshoot spark plug connections, contact points, defective cables, etc..
SUPERIOR MATERIAL: Rubber sheath, high-quality high-temperature-resistant wire, environmentally friendly acetate fiber plastic, work in high and low temperature environments have no effect..
EASY TO USE: Easily determine which cylinder is causing issues with this spark plug test light. Simply connect the spark detector spark plug tool between the spark plug and the plug wire then start the engine..
PRECISION SPECIFICATIONS: Each engine spark tester automobile spark plug checker has a 3-inch (7.6 cm) nickel-plated shaft and a 7-inch (17.8 cm) rubber straight sleeve and cable. A pair of 1 inch (2.5 cm) lampshades, the distance of this tool is 11.3 inches (28.8 cm), even in hard-to-reach areas, you can check for sparks..

Check Stock

Mopar 82215366 Front End Cover Jeep Gladiator Wrangler W/ Diesel Engine

Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....

Check Stock

G Madlife Garage Carburetor with 2 Barrel For 1966-1973 Dodge Plymouth Models & Dodge Truck with 273-318 Engine (Manual Choke)

★100% brand new and high-quality carburetor..
★Conpatible with: Dodge Chrysler 318 V8 5.2L 1967 - 1980 Dodge 6 Cil Engine..
★For Plymouth models & Dodge Truck 1966-1973 with 273-318 engine..
★Add 5-10% horsepower and maintain near stock fuel mileage..
★Notice: Impurity in fuel may cause clogging in the carburetor, please use the clean fuel to ensure the carb work normally, please clean the automobile oil circuit and air filter before you install the carburetor..

Check Stock

VEVOR Hydraulic Cylinder Liner Puller 15 Ton Liner Puller Tool, Both Dry-Type and Wet-Type Fit Diameter of 80mm-140 mm, Universal Cylinder Liner Puller Tool Set for auto Repair and Disassembly

15t Hydraulic Puller: Max Capacity: 15T. This hydraulic cylinder puller is suitable for all cylinders with a diameter of 80-140 mm. Both dry type and wet type can be used. It's ideal for the disassembly of internal combustion engine and cylinder liner..
Superior Quality: The hydraulic puller is made of premium steel and processed by precision forging. It is sturdy, corrosion-proof, and has stable performance. The support seats, lead screw, and screw nut are all thickened, which will be more durable..
Complete Puller Kit: A complete set of tools required for removing the internal combustion engine and cylinder liner. Every part is included, and they are easy to assemble. Our cylinder-pulling artifact can easily remove the cylinders without damage the original parts..
Easy Operation: This 15t cylinder liner puller is very simple to use. All you need to do is adjust the inner diameter of the cylinder liner that you need to pull out, and you can use it directly—no need to take down the crankshaft..
Wide Application: Suitable for the removal of internal combustion engines and cylinder liners. Also, suitable for pulling hubs, flanges, gears, bearings, and more. It is a great helper for the auto repair shop, garage, automobile maintenance..

Check Stock

Engine Oil Cooler Kit - Compatible with Ford Trucks - Powerstroke 6.0L V8 F250, F-350, F450, F550 Super Duty, Excursion, E350, E-450 - Replaces Part 904-228, OCK388, 3C3Z 6A642 CA - Gasket Seal Kit

Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine..
Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |..
Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle..
OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models....

Check Stock

Alpha Rider 100pcs 8mm Fender ATV Push Retainer Clips Fastener for Honda Suzuki Kawasaki Polaris Sportsman Rangers Rzr Replace 7661855

【Fitments】Fit for Honda: Rancher, Foreman ,Rubicon, Rincon, Trx680, Trx650, Trx500, Trx450, Trx400, Trx350, Trx300, Trx250, 250Ex, 300Ex, 400Ex,....
【Perfect replacement 】Replace 7661855 & Made of High Quality Plastic.
【Broad Application】For automobile fenders, bumpers, doors or other automobile surfaces..
【Easy Installation】Insert the female part into the hole and push the male part to the bottom to close the position..
【Size】Max Diameter: 15mm / 0.59", Total Length: 25mm / 0.98", Stem Length: 22mm / 0.86".

Check Stock

A-Premium Left Exhaust Manifold Kit with Gasket Compatible with Nissan Frontier 2005-2019 Pathfinder 2005-2012 NV1500 NV2500 NV3500 2012-2021 Xterra 4.0L

【Vehicle Fitment】This Exhaust Manifold Kit is Compatible with Nissan Frontier 2005-2019, NV1500/NV2500/NV3500 2012-2021, Pathfinder 2005-2012, Xterra 2005-2015---V6 4.0L.
【Durable Construction】This exhaust manifold set is made of solid metal which can resist heat, cold, warping and corrosion, and restore engine proper operation.
【Reference Number】The A-Premium Exhaust Manifold Kit's reference number: 674-947, 674947, 14002EA210, 14002EA21A. Before placing an order, verify that the part is compatible with your vehicle using the compatibility system..
【Customer Support】1 Year Unlimited-mileage Quality Guarantee.
With being sturdy and brand-new, this exhaust long tube headers is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..

Check Stock

Maxwel Manufacturing Wire Harness Automotive Cloth Tape - 2 Rolls Strong Flexibility High Abrasion Resistance Adhesive Force Heavy Duty Wire Harness Tape for Automotive Insulation Wiring 3/4 in 82 FT

✅Pack of 2 pieces cloth tape 3/4IN width 82FT long which can be used for a long time in any automotive wire insulation..
✅The cloth wire tape uses extremely excellent materials which feel soft also have Strong Flexibility!.
✅Also Wiring tape has amazing high and low temperature stability which can work continuously between -40℉and 257℉,so it will be work well in the part of engine, battery or car audio installation..
✅Our wire harness tape is not easy to wear and corrode also has great insulation and amazing abrasion resistance, it is definitely great choice for wire harness on automobile for wire wrapping or wire repair..
✅More than 1.5 N/cm Back adhesion create a strong wire harness that is not easy to fall off, it won't let you down!!.

Check Stock

Partol Carburetor for Dodge Plymouth Dodge Truck 1966-1973 with 273-318 Engine, 2 Barrel Carburetor Carb Replacement - Manual Choke

To ensure correct purchase, please compare your carburetor against pictures before you purchase. Fit Plymouth models and Dodge Truck 1966 1967 1968 1969 1970 1971 1972 1973 with 273-318 engine.
High performance manual choke apply to Dodge 273-318 engine, directly replace the old/broken carb.
High performance Carter style carburetor replacement, add 5-10% horsepower and maintain near stock fuel mileage.
To ensure the carb work normally, please clean the automobile oil circuit and air filter before you install the carburetor.
Package Included: 1x carburetor for Dodge Plymouth. Flange gaskets and air gasket included.

Check Stock

4HP Outboard Motor Boat Engine, 4 Stroke Heavy Duty Outboard Motor Fishing Boat Engine with Water Cooling System (4-Stroke 4HP)

...ight/net weight: 13(28.66lb)/9.7kg(21.3lb).
Recommended engine oil: four-stroke engine oil.
④ATTENTION:Use four-stroke special engine oil (automobile and motorcycle engine oil).
Add oil according to the scale indication on the oil dipstick (the rotating cover),do not add more or less.
The fuel tank of the four-stroke outboard engine can only be filled with No.92 pure gasoline.
Gently press the oiler on the carburetor until the oil flows to the top of the transparent oil pipe..
⑤WIDE APPLICATION: It can be marched with inflatable boats, rubber boats or fishing boats. ( Tips:The running-in period is about 10 hours or one month. Do not drive at high throttle during the running-in period.
Change the engine oil and gear oil after the running-in period, and the second change time is about 100 hours or six months later.
The machine must be erected in a reliable place when not in use.).

Check Stock