ReviewsAutomotive Brake Line Flaring Tool Set

Eastwood 3/16 Die Kit Replacement Brake Line Tubing Flaring Tool 45-Degree Single Double and Bubble Brake Flares

  • Flare Punch Set For Eastwood Pro Brake Tubing Flaring Tool.
  • Direct Replacement For Your Worn 3/16” Die Set.
  • Restores Like New Performance To The Eastwood Pro Brake Tubing Flaring Tool.
  • This Kit Includes The Op1 Punch Die, The Op2 Punch Die And The 3/16 Inch Die Plates To Make A Complate Kit To Refresh The 45 Degree Turret Head.
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock

Wostore Double Flare Tool Adapters 7 Pcs 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 Inch Tube Expander Flaring

  • The kit includes 7 PCS flaring adapters..
  • Flaring tool adapters apply to 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" O.D.tubing..
  • Designed to use when flaring double flare in copper, aluminum, magnesium,and brass tubing as well as soft steel brake line tubing..
  • Multiple size options,meets almost all your flare needs..
Check Stock

Neiko 20657A ISO/Bubble Flaring Tool Kit

  • Designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
  • Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
  • Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
  • Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm.
  • Includes blow-molded carrying case for organization and storage.
Check Stock

YAETEK Swaging Tool Kit – Flaring Tool Kit - Tube Cutter Rachet Wrench Swag Tool - 45 Degree Brake Line Tubing Brass Aluminum Copper Extrusion 1/8 to 3/4 for HVAC Water Gas Pipe Automotive Plumbing

  • Sizes of This YaeTek Swaging Flaring Tool Kit: Flare adapters 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" OD.
  • Material: Swivel is made of alloy steel, chrome-plated to assist in reducing friction.
  • Yoke is heat-treated forged steel with max strength and....
  • Do your Brake Line Job: This YaeTek Flaring Swaging Tool Kit 10pc Tubing Flaring Kit includes 2 bars (9 sizes) with a self-centering, slip-on yoke to....
  • A CompleteFlaring Tool kit with necessary tools to complete your job.
  • This Tool makes 45 Degree Flares on soft copper, brass, aluminum and mild steel....
  • Package includes flare adapters, swage fittings, refrigeration wrench to open square valves on hose bibs and acetylene tanks, with a Plastic carrying....
Check Stock

HORUSDY 7 Dies Flaring Tools Set For Sizes 3/16' -3/4' Refrigeration HVAC 45 degree Heavy Duty Eccentric Cone Type Kit for Water Gas Refrigeration Brake Line Applications,

  • The clever clutch mechanism automatically prevents over-tightening.
  • Off-set yoke reduces friction and force required, working together to produce perfect SAE 45° flares every time on copper, brass, aluminum and other soft steel tubing. Will also flare hard copper, steel, stainless steel and brass through a wall thickness of 0.035 inches。.
  • It creates a perfectly smooth flare. Will not crush the tubing. Hardened steel flaring cone, eccentrically mounted in needle bearings, produces rolling action for even metal flow, giving uniform flare walls without galling. Ideal for Water, Gas, Refrigeration, and Brake Line Applications.
  • A single clamp screw provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort.
  • Pipe sizes for the Flaring Tool are 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4".
  • Silver flaring bars are heat-treated for durability and secure grip on tubing.
Check Stock

25Ft 3/16 Copper-Nickel Coated Alloy Brake Line Tubing Coil Kit Tube Roll with 16 Fittings

  • 25 Ft Roll x 3/16" copper-nickel alloy COATED OD Zinc plated steel brake line tubing with 16 assort fittings..
  • It won't rust, corrosion resistance, extremely easy to bend by hand and flare by simple tools..
  • The brake line is very flexible and very easy to bend and flaring to mount - you can manually bend our brake lines without the need for a bending tool.
  • It includes SAE flare Nuts and meets relative international standards..
  • With superior durable material and great performance for longer use..
Check Stock

OTC 4504 Stinger ISO Bubble Flaring Tool Kit

  • Designed for crack-free bubble flares on soft steel tubing used in automotive brake systems.
  • Flaring bar and all the adapters needed for ISO bubble flaring.
  • Forged yoke is made of heat-treated steel.
Check Stock

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

  • Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • GM transmission cooling line 3/8" and 1/2".
  • Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
  • Dies have an enlarged compression area to grip the dies better.
  • Flaring tool set includes a Stabilizing Arm for easy tube forming.
Check Stock

KOOPOOL Double & Single Flaring Tool Kit for Brake Line HVAC System with Tube Cutter Extra 7 Adapters,Brass Copper Pipe 45 Degrees Flaring Tool

  • 【Multifunction】This flaring tool creates 45-degree double or single flares. It can be applied to copper, aluminum, brass, magnesium, and other soft steel lines. Ideal for brake line, HAVC, air conditioning brass line and so on.
  • 【Durable Material】Yoke made of heat-treated steel material for maximum strength and longevity. Swivel made of chrome-plated alloy steel to reduce friction.
  • 【Applications】Double flaring tool kit suitable for: 3/16”, 1/4”, 5/16”, 3/8", 7/16", 1/2", 5/8" (5, 6, 8, 10, 12, 14, 16mm) single or double flares.
  • Tubing cutter has a 1/8” to 1-1/8” inches (3-30 mm) capacity with inner / outer reamer.
  • 【Tubing Cutter Included】Pipe cutter has 2 rollers and fold-away slide lock reamer deburring blade.
  • used to cut steel, aluminum, and copper tubing.
  • cutting wheel life and adjustment amount for each turn depends on material hardness.
  • 【Easy Storage and Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization.
Check Stock

Durable Universal Hydraulic Pipe Expander Fuel Line Flaring Tool Set Dilator Scraper Cutter Hole Splint

  • Expanding & Flaring Functions: This hydraulic flare tool features 2-in-1 tube expanding and flaring functions with eight expanding dies(3/16", 1/4",....
  • Manual Hydraulic Mechanism: This flaring tool set achieves the pipe expanding and flaring with a hydraulic mechanism. The hydraulic tool is designed....
  • Pipe Cutting & Deburring: This flaring tool comes with one pipe cutter and one deburring tool, both of which are easy to use with the handwheel....
  • Durability & Portability: The flaring tool is made of durable hardened steel, which is reliable and built to last, saving your money. Besides, the....
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding and flaring soft metal tubing and piping, such as copper and aluminum....
Check Stock