ReviewsAutomotive Drain Plugs

RVMATE RV Water Heater Drain Plug Kit, Include Angled Wrench, 4 Pieces 1/2\ NPT Replacement Plugs and 1 roll PTFE Tape

  • Useful RV water heater tool kit, contains 1 wrench, 4 drain plugs and 1 PTFE tape..
  • Special angled design wrench, helps you reach tight places and rotate drain plugs. Suitable for 15/16 inch and 7/8 inch..
  • 1/2” NPT water heater drain plugs fit for most RV water heater..
  • Wrench prongs for rusted drain valves and petcock drains..
Check Stock

AIEVE Drain Plug Hose Connection for YETI Cooler, Cooler Drain Plug Replacement for YETI, Cooler Plug Replacement for YETI Chest, Cooler Accessories for YETI Tundra Cooler, Roadie Cooler, Tank Cooler

  • AIEVE cooler drain plugs for yeti cooloer with leak-proof design replace your old or broken cooler drain plugs perfectly, use with most standard hoses to drain your YETI coolers easily, allows you to drain your YETI Cooler with a garden hose without removing it.
  • This cooler drain plug replacement for YETI coolers is easy to open and close to drain your cooler water, durable and provides a secure connection for easy draining, no long need to pull cooler out your truck to drain water, effective and ice melts eventually.
  • Cooler plug replacement for yeti cooler fit most standard hoses to drain the cooler water easily while drain plug is partially open, garden hose drain plug connector for coolers, connect a standard garden hose, and drain all the way down at the end of the driveway, instead of pooling a big old puddle of cold water into your garage.
  • Tighten the replacement cooler plug and keep your YETI Tundra coolers cold, when not in use, simply attach the provided cap as a leak-proof plug and drain your YETI coolers easily without lifting a finger, no need to drag the ice chest to the end of the tailgate to drain and the wat....
Check Stock

Cooler Drain Plugs Replacement for Yeti Cooler - Drain Plugs Caps Compatible with Rtic Orca Yeti's Line of Roadie Tundra Tank Coolers, 2 Pack Cooler Drain Plugs with Leak-Proof Upgraded Design (Small)

  • Screws right in, seals tight without any leaking issues.
  • Made of ABS+ silicone seal, solid built and durable to use.
  • Nicer plugs with upgraded design for a easier twist.
  • This cooler drain plugs is for Yeti Tundra Roadie coolers, Orca coolers, Nice coolers and Rtic coolers. Had been feedbacked by buyers to fit for the Rtic 20 45 65 110 coolers, Yeti 20 35 45 55 65 coolers..
  • Note: This 2-Pack of drain plugs fit for the RTIC Coolers with ONLY 1 Drain Hole, which was manufactured prior to 2017. Or for the Rtic coolers Made in 2017 to Current, which had 2 drain holes, it just fit the small holes. For the drain plugs of the larger holes, we also had it for sale in our store..
Check Stock

Honda Genuine OEM Automatic Transmission Drain Plug Washers (18mm), Bag of 5-90471-PX4-000

  • Factory replacement automatic transmission drain plug washers, 5 pack.
  • Fits all Honda automatic transmission drain plugs.
  • Fits all Pilot and Ridgeline rear differential drain plugs.
Check Stock

Drain Plugs Replacement for RTIC Coolers,Compatible with RTIC 20QT 45QT 65QT with New 2 Drains Coolers Large & Small 2 Pack

  • COMPATIBILITY: The RTIC Compatible Large & Small Drain Plug Combo Pack Is An Improved Design That Fits Specifically With the RTICs New 2 Drain....
  • PACKAGE CONTAINS: This Package Includes Both RTIC Replacement Plugs Used in the “Dual Drain Plug System” – One Small Plug and One Large Plug..
  • PERFECT SIZE: An Oversized Drain Plug on One Side of the Cooler to Allow Faster and Easier Draining..
  • GOOD REPLACEMENT: The Beast Cooler Dual Drain Plug Kit Contains Both the Large and Small Drain Plugs Specifically Made to Be Compatible With the RTIC....
  • EASY TO USE: Drains Easily and Has a Standard Sized Drain Plug on the Other Side With an Integrated Vacuum Relief Valve for Easier Opening of the....
Check Stock

heyous 2pcs Cooler Drain Plugs with Leak-Proof Design for Yeti's Line of Roadie, Tundra, and Tank Coolers and RTIC Coolers

  • Package includes: 2pcs x Cooler Drain Plugs..
  • It's designed to drain when partially open without having to fully remove the plug, the cooler floor is channeled and recessed for easy drainage..
  • Easy to use these replacement drain plugs to drain the cooler water while drain plug is partially open..
  • Tighten the cooler drain plug is good for keeping your RTIC Coolers or YETI coolers cold and easy draining, great replacement for YETI accessories YETI cooler accessories and RTIC cooler accessories..
Check Stock

3Pcs Drain Pipe Sewer Seal Rings Deodorant Silicone Ring Washing Machine Sealing Plug for Bathroom Kitchen Cleaning Tools

  • ❤️【Drain Pipe Hose Silicone Plug】These drain pipe seal rings are anti-aging and anti-corrosion, which made of high quality silicone material,....
  • ❤️【Kitchen Sewer Seal Ring】These seal plugs are suitable for washing machine, washing tank, floor leakage and other drains and sewer pipe....
  • ❤️【Washing Machine Drain Multipurpose Pipe Connector】Effective sink stopper. Suitable for drain outlets with a diameter of about 1.5in. The....
  • ❤️【Stylish and Unique Design】Multi-layer thread and flexible design make it tightly integrated the sewer.Washing machine bottom floor drain....
  • ❤️【for Bathroom Kitchen Laundry】 These seal plugs can be used for floor drains in toilets, washing machines, drain tanks in your....
Check Stock

Riakrum 2 Pieces T-Handle Drain Plug Twist-Turn Marine Boat Drain Plugs Rubber Plugs with Brass Handle Boat Marine Accessories Brass Plated T-Handle Plug Rubber Drain Plug for Hull (1 Inch, 40 g)

  • Package contents: you will receive 2 pieces of T-handle drain plugs, they are enough for your daily use and can be your nice helpers for marine work, they can also be your spare drain plugs on your boat, you can also share them with others.
  • Reliable material: we adopt brass and rubber material for these twist-turn boat drain plugs, the plug is made of rubber and the handle is made of brass, which is strong and not easy to bend, the handle is not easy to get rusted, can serve you for a long time.
  • Convenient to use: the T-handle rubber plug measures approx. 5 x 3.5 x 3 cm/ 2 x 1.4 x 1.2 inches, and the diameter of each plug is about 1 inch, it is suitable for 1-inch hole, the plug is about 40 g, very convenient for you to take on boats.
  • Easy to use: these twist drain plugs are simple to install on your boat, you just need to remove the old ones and stick the rubber plugs in the holes, and then twist the T-handles to lock in place, the installation is simple and can be completed in a few minutes.
  • Wild applications: these brass handle rubber plugs can be applied in many occasions, you ....
Check Stock

YETI and RTIC Compatible Large & Small Drain Plug Combo Pack - Compatible Replacement Plugs for RTIC's and Yeti's New 2 Drain Coolers - Yeti Cooler Accessories

  • Compatibility: The RTIC Compatible Large & Small Drain Plug Combo Pack Is An Improved Design That Fits Specifically With the RTICs New 2 Drain Coolers..
  • Package Contains: Yeti bucket accessories has the package which includes Both RTIC Replacement Plugs Used in the “Dual Drain Plug System” – One Small Plug and One Large Plug..
  • Perfect Size: Yeti cooler plug and RTIC cooler plug has an Oversized Drain Plug on One Side of the Cooler to Allow Faster and Easier Draining. Yeti stopper helps to stop the water and easy to drain..
  • Good Replacement: The Yeti Accessories Beast Cooler Dual yeti cooler drain plug Kit Contains Both the Large and Small Drain Plugs Specifically Made to Be Compatible With the RTIC Coolers With Dual Drain Valve System..
  • Easy to Use: Yeti Drain hose or yeti drain plug has a Standard Sized Drain Plug on the Other Side With an Integrated Vacuum Relief Valve for Easier Opening of the Cooler Lid When the Plug Is Pressed..
Check Stock

Camco RV Water Heater Drain Plug and Wrench Kit - Designed for RV & Camper Water Heater Drain Plugs| Fits 7/8\ & 15/16\ Drain Plugs | Angled Design Allows You to Reach Tight Spots -(11633) , Black

  • Designed for RV water heater drain plugs.
  • Angled design allows you to reach tight places.
  • Includes prongs for rusted drain valves and petcock drains.
  • Includes wrench, two 1/2" NPT replacement plugs and Teflon tape.
Check Stock

HESTYA 8 Pieces Kayak Drain Plug Kit Course Thread Drain Plug with 16 Pieces Screws Thread Drain Plugs Bung Screws Kit for Kayak Canoe Boat Replacement Accessories

  • You will get: you will get 8 pieces kayak drain plug kit, with 16 pieces screws, the quantity of drain plugs are enough to meet your daily replacement....
  • Suitable size: Kayak drain plug kit press board size: approx. 2.2 x 1.2 inches (5.6 x 3.1cm), outside diameter of scupper plug: approx. 1 inch....
  • Quality material: Course thread drain plug is made of quality ABS plastic, sun protection, strong and corrosion protection performance, durable and....
  • Easy to use: Thread drain plugs bung screws kit is easy to install, easy to drill, and not easy to mess up.
  • Just install the kayak drain plug kit on....
  • Widely applied: The drain plug prevents water penetration and drains the water from the inner hull of the kayak.
Check Stock