ReviewsAutomotive Engine Bolts

Gates Engine Coolant Thermostat compatible with Dodge Grand Caravan 3.3L 3.8L 4.0L V6 2007-2010 Cooling Housing Belts

...oes more than just regulate your engine operating temperature. This top quality, OE-equivalent thermostat is designed to reduce engine wear, increase fuel efficiency, diminish emissions, accelerate engine warm-up, improve cold-weather usability, and prevent engine overheating.
CONTROL TEMPERATURE CONSISTENTLY: Gates automotive thermostats offer precision temperature control within optimal operating range and are innovatively engineered to significantly improve engine cooling system performance. The Gates Engine Coolant Thermostat is designed for easy and effective installation to meet your repair or replacement needs. Gates partners with OEM manufacturers to ensure that every part is an exact fit for your vehicle.
RELY ON QUALITY BELTS AND HOSES: In the most extreme environments and those more familiar, Gates is there with the right product, in the right place, at the right time. Whether building original equipment or maintaining products in the aftermarket, they enable their customers to be more efficient, productive, and profitable. Gates proudly brings quality, reliability, and performance to their OE-equivalent aftermarket parts.
TRUST IN GATES: This leading supplier of belts, hoses, timing belt kits, belt tensioners, serpentine belts, and more has ....

Check Stock

Gates Radiator Cap compatible with Jeep Liberty 2.8L 3.7L L4 V6 2003-2012 Antifreeze Cooling System Belts Radiators Coolers

...oes more than just regulate your engine operating temperature. This top quality, OE-equivalent thermostat is designed to reduce engine wear, increase fuel efficiency, diminish emissions, accelerate engine warm-up, improve cold-weather usability, and prevent engine overheating.
CONTROL TEMPERATURE CONSISTENTLY: Gates automotive thermostats offer precision temperature control within optimal operating range and are innovatively engineered to significantly improve engine cooling system performance. The Gates Engine Coolant Thermostat is designed for easy and effective installation to meet your repair or replacement needs. Gates partners with OEM manufacturers to ensure that every part is an exact fit for your vehicle.
RELY ON QUALITY BELTS AND HOSES: In the most extreme environments and those more familiar, Gates is there with the right product, in the right place, at the right time. Whether building original equipment or maintaining products in the aftermarket, they enable their customers to be more efficient, productive, and profitable. Gates proudly brings quality, reliability, and performance to their OE-equivalent aftermarket parts.
TRUST IN GATES: This leading supplier of belts, hoses, timing belt kits, belt tensioners, serpentine belts, and more has ....

Check Stock

ACDelco GM Original Equipment 10-9147 dexos™1 GEN 2 Full Synthetic 5W-30 Motor Oil - 5 Qt

Designed to help provide maximum protection for your vehicle’s engine.
Meets the industry standards for automotive engine wear protection to provide top-of-the-line engine support.
Meets ILSAC GF-6 specifications to fulfill current energy-conserving performance standards.
The ILSAC GF-6 engine oil performance standard is designed to improve fuel economy and enhance engine capabilities for passenger cars.
Meets API SN Plus Service Classification requirements to be suitable for use in modern engines.
Provides protection against high-temperature deposits to help reduce engine wear.
Provides protection against viscosity breakdown for long oil life and drain intervals.
Helps protect against the formation of sludge and varnish deposits on engine parts to provide additional engine support even in demanding stop-and-go driving conditions.
Meets the industry standards for automotive engine wear protection to provide exceptional engine support.

Check Stock

Gates Radiator Cap compatible with Dodge Ram 2500 4.7L 5.2L 5.7L 5.9L 6.7L 8.0L L6 V10 V8 1994-2010 Antifreeze Cooling System Belts Radiators Coolers

...oes more than just regulate your engine operating temperature. This top quality, OE-equivalent thermostat is designed to reduce engine wear, increase fuel efficiency, diminish emissions, accelerate engine warm-up, improve cold-weather usability, and prevent engine overheating.
CONTROL TEMPERATURE CONSISTENTLY: Gates automotive thermostats offer precision temperature control within optimal operating range and are innovatively engineered to significantly improve engine cooling system performance. The Gates Engine Coolant Thermostat is designed for easy and effective installation to meet your repair or replacement needs. Gates partners with OEM manufacturers to ensure that every part is an exact fit for your vehicle.
RELY ON QUALITY BELTS AND HOSES: In the most extreme environments and those more familiar, Gates is there with the right product, in the right place, at the right time. Whether building original equipment or maintaining products in the aftermarket, they enable their customers to be more efficient, productive, and profitable. Gates proudly brings quality, reliability, and performance to their OE-equivalent aftermarket parts.
TRUST IN GATES: This leading supplier of belts, hoses, timing belt kits, belt tensioners, serpentine belts, and more has ....

Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
The holder bar keeps the water pump pulley in place while loosening the radiator fan.
FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
Also compatible with some Ford, GM, and Chevy models.
Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....

Check Stock

Aintier Radiator or AC Condenser Engine Cooling Fan Clutch 2790 Replace Fit for Dodge Durango/Dakota/D150/D250/D350

FIT THESE VEHICLES – 1992-1993 Dodge D150.
DETJTECTION – 1.Fan spins excessively when engine is stopped.2.Poor A/C performance at idle or low vehicle speeds.3.Fan speed does not increase when engine is hot.4.Fan speed does not increase until engine is excessively hot.5.Fan blade tip moves more than 1/4â€front to back.6.Fan turns roughly or does not turn at all.7.Excessive fan noise at all speeds due to failed bearing.8.Vibration that increases with engine speed..
INSTALLATION – Step 1: Remove the fan shroud.
Step 3: Rock from side to side. Step 4: Remove the bolts.
Step 7: Put the fan back into the engine..
FEATURES – Turns the fan 70-90% of the shaft speed when engaged for increased cooling.
Turns the fan 25-35% of the shaft speed when disengaged.
Used with deeper pitch fans (2-1/2″of pitch).
Land and groove design with up to 27 square inch of working surface.
Identified by finned aluminum face plate and thermal spring on the front.
PACKAGE INFORMATION – 1 piece of engine cooling fa clutch,and our professional customer service team,ple....

Check Stock

Fuel Banjo Bolt Ultra High Flow Upgrade Kit for Ford 6.0L & 6.4L fit for Powerstroke F250, F350, 450, F550

Fitment -- This Banjo Bolt Upgrade Kit is a recommended update for Ford 2003-2008 6.0L and 2008-2010 6.4L fit for Powerstroke F250, F350, 450, F550 diesel..
Tear Drop Design -- Design for both Power Stroke 6.0L and 6.4L owners who want to ensure maximum fuel flow to all injectors. These banjo bolts go into the head in the front of the engine to feed fuel to the injectors..
Improve Performance -- The OEM Banjo bolts part numbers W302472 (Bolts) W303659 (Washers) cause a restriction in the supply of fuel to the engine, replacing them with our updated bolt kit will improve performance in your engine considerably..
Package Include -- The kit contains 2 upgraded banjo bolts with new copper seals..
100% Satisfaction Guarantee -- If you're not 100% satisfied with this kit, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..

Check Stock

Allstar ALL96480 Black Plastic Engine Connecting Rod Guide Tool for 3/8\ or 7/16\ Rod Bolt

Engine connecting rod guide tool fits 3/8 inch or 7/16 inch rod bolts and is made from quality black plastic.
Simply slip the tool over the rod bolts to ease piston installation and eliminate rod bolts from hitting the crank.

Check Stock

Gates Radiator Cap compatible with Ford F-100 3.8L 3.9L 4.2L 4.9L 5.0L 5.8L 5.9L 6.4L 6.6L 7.5L L6 V6 V8 1966-1983 Antifreeze Cooling System Belts Radiators Coolers

...oes more than just regulate your engine operating temperature. This top quality, OE-equivalent thermostat is designed to reduce engine wear, increase fuel efficiency, diminish emissions, accelerate engine warm-up, improve cold-weather usability, and prevent engine overheating.
CONTROL TEMPERATURE CONSISTENTLY: Gates automotive thermostats offer precision temperature control within optimal operating range and are innovatively engineered to significantly improve engine cooling system performance. The Gates Engine Coolant Thermostat is designed for easy and effective installation to meet your repair or replacement needs. Gates partners with OEM manufacturers to ensure that every part is an exact fit for your vehicle.
RELY ON QUALITY BELTS AND HOSES: In the most extreme environments and those more familiar, Gates is there with the right product, in the right place, at the right time. Whether building original equipment or maintaining products in the aftermarket, they enable their customers to be more efficient, productive, and profitable. Gates proudly brings quality, reliability, and performance to their OE-equivalent aftermarket parts.
TRUST IN GATES: This leading supplier of belts, hoses, timing belt kits, belt tensioners, serpentine belts, and more has ....

Check Stock

ISPINNER 150pcs 304 Stainless Steel Cotter Pin Clip Key Fastner Fitting Assortment Kit

【HIGH QUALITY】Made of high quality 304 Stainless Steel, corrosion resistant, durable and steady, high quality materials and construction to ensure long service life..
【UNIQUE DESIGN】The cotter pin made of heavy duty material, with hair pin style design gives fast and secure hold for bolts and pins, specialty locks to ensure tight hold that will last long..
【VARIOUS SIZES】150Pcs 6 different Sizes in a convenient grid storage box, Including M1.6*25, M2.5*25, M2.5*40, M3.2*30, M3.2*40, M4*60. Different sizes can meet your different daily needs..
【EASY TO USE】When the nut is tightened, put cotter pin into nut groove and the tail hole of the bolt, and pull off the tail of the cotter pin, which can prevent the relative rotation of the nut and the bolt..
【WIDE APPLICATIONS】 Perfect for Automotive, Mechanics, Car Garage, Workshop, Power Equipment, Cars, Trucks, Lawn Mower, Small Engine Repair, & Fastening..

Check Stock

Chelhead LS Flywheel Locking Tool Steel Black Oxide Flexplate Locking Holder Tool Compatible with Engine Chevy LS 1 2 3 LSX

Chelhead LS flywheel locking tool Compatible with Chevy LS 1 2 3 LSX, clears all RWD bellhousings-Manual and Automatic (do not work on FWD engines).
TIG welded using 1/4" cold rolled USA Steel, proven design for strength and reliability.
Easy to install - ls engine tools just bolts in place of your starter and locks securely into the flywheel teeth.
ls flywheel locking tool are designed to work on engines mounted to an engine stand or an engine already installed in the vehicle.
Packing: 1PCS Engine Flywheel Locking Tool Comes with two proper length grade 8.8 bolts.

Check Stock