ReviewsAutomotive Performance Control Arms

Proforged 102-10019 Greasable Front Left Idler Arm - RWD

...el studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability..
BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance idler arms: Proforged..
WHAT IS AN IDLER ARM? A idler arm is part of your vehicle’s steering system - it connects to your center link for support, pivoting as your wheels turn. Idler arms have a wearable joint, just like your hip, and needs to be replaced as it wears out. A worn idler arm causes poor handling and makes it difficult or impossible to achieve an alignment, which leads to rapid tire wear. Replacing your worn idler arm gives a noticeable improvement in steering feel, handling, and safety..

Check Stock

KSP 2-4inch Upper Control Arms Compatible with Ford F-150 Suspension Kits Tubular Black Arms Alignment Lift 2 to 4” for 2004-2020 F150 Replacement Factory/Stock Suspension Arms 2nd Generation

【Fitment】Fit for 2004-2020 F150. Better replacement OEM control arms, lift the vehicle 2-4”.The control arm could perfectly fit the stock....
【Notes】1、the ball joints don't require extra grease；2、Please tighten the zerk at any direction after refilling grease. Do not over-tighten....
【Safety Guarantee】TIG welding and Larger tubular of upper control arms are more solid and stable,enhancing safety performance..
【Better Driving Performance】PU BUSHING instead of rubber bushing,more suitable for low temperatures；DUST CAP increase service lift；Reasonable....
【Warranty】We offer "30-day refund，12-month warranty of ball joint ".Feel free to contact us if you have any problems..

Check Stock

BBK 25210 Rear Lower Control Arm for Ford Mustang V6, GT, Cobra - Non IRS - Heavy Duty Performance - Powdercoat Finish

BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
These BBK Rear Lower Control Arms Will Give Firmer Improved Launches and Improved Handling Characteristics.
Precision Robotic Welding, All Steel Constuction, Baked on Durable Powdercoated Finish.
Polyurethane Bushings are Installed Along with Zerk Fittings to Allow them to Greased Occasionally.
Direct Bolt on for Factory Rear Lower Control Arms, No Modifications Required, (Will Not Fit Irs Applications).

Check Stock

Blondie - AutoAmerican - Chrysalis - 32 027 5, Bertelsmann Club - 32 027 5

FITS: Wheels with a 14mmx1.5 thread pitch and 60 degree conical seat (also known as cone seat/tapered seat).
DON'T FIT: Factory OEM wheels or vehicle Manufactured wheel(vehicles with Mag Seat or Ball Seat/Round Seat).
SPECS: Thread pitch M14x1.5, 60 Degree cone/conical seat, Overall tall 2" (50mm), Width 0.91"(23mm) , Closed end , 1 Socket keys 13/16"(21mm) and 7/8"(22mm) Hex.
Advantages:Anti-Rusting and Anti-Stripped: Cold Forged and Heat Treated SCM 435 Steel(High Strength and Durability), quality durable surface dealing process, clear and clean pitch thread, More Automotive Accessories Parts in Our Store(Wheel Spacers/Lift Kits/Control Arms.
Packages: 32x Black Lug Nuts+1 Key with Pro Shock-Proof Box. 2 years warranty! feel free to contact us if any problems.

Check Stock

DWEII MG995 Servo Motor Control 180 Angle Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter Pack of 3

Stall torque: 12kg/cm(6V), 13kg/cm(7.2V). Recommended voltage: 5V, current usage: 3A.
Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys.
Dimension:40.7*19.7*42.9mm(1.6*0.78*1.69in).
This high-speed standard servo motor can rotate 180 degrees (90 in each direction)..
Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys..
Compatible with most standard receiver connector.

Check Stock

Disney Jackson Storm Build to Race Remote Control Car – Cars

Genuine, Original, Authentic Disney Store.
Swap parts for 2 different performance modes: race mode or off-road mode.
Set includes: Jackson Storm car, 1 remote control, 4 off-road tires, 4 race tires, 1 engine, 2 sets of control arms, 2 axels, hood scoop, zoomies, and....
Compete against Lightning McQueen Build to Race Remote Control Car, sold separately.

Check Stock

BBK 25260 Rear Upper And Lower Control Arm Set for Ford Mustang V6, GT, Cobra - Non IRS - Heavy Duty Performance - Powdercoat Finish

BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
These BBK Rear Upper and Lower Control Arms Will Give Firmer Improved Launches and Improved Handling Characteristics.
Precision Robotic Welding, All Steel Constuction, Baked on Durable Powdercoated Finish.
Polyurethane Bushings are Installed Along with Zerk Fittings to Allow them to Greased Occasionally.
Direct Bolt on for Factory Rear Lower and Upper Control Arms, No Modifications Required (Will Not Fit Irs Applications).

Check Stock

BBK Performance 2526 Rear Upper and Lower Control Arm Kit for Ford Mustang V6, GT Cobra, Non IRS, Heavy Duty Performance - Powdercoat Finish, Red

BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
These BBK Rear Upper and Lower Control Arms Will Give Firmer Improved Launches and Improved Handling Characteristics.
Precision Robotic Welding, All Steel Constuction, Baked on Durable Powdercoated Finish.
Polyurethane Bushings are Installed Along with Zerk Fittings to Allow them to Greased Occasionally.
Direct Bolt on for Factory Rear Lower and Upper Control Arms, No Modifications Required.

Check Stock

Gates Engine Coolant Thermostat compatible with Pontiac G6 3.5L 3.9L V6 2006-2010 Cooling Housing Belts

This Gates Radiator Cap is compatible with Jeep Liberty 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003 2.8L 3.7L L4 V6 and is perfect for a tune up or performance upgrade..
CATCH COOLANT OVERFLOW: This exact OE-replacement Gates Radiator Cap is critical to keep your engine cooling system operating at optimal pressure and temperature. The Gates Radiator Cap is designed for easy and effective installation to meet your repair or replacement needs. Gates partners with OEM manufacturers to ensure that every part is an exact fit for your vehicle. The cap requires no adjustment for installation.
EXTEND SERVICE LIFE: All Gates radiator pressure caps are constructed of corrosion-resistant, heavy-gauge metal to ensure long service life and accurate control of pressure. It also can be installed and removed much easier than conventional caps.
RELY ON QUALITY BELTS AND HOSES: In the most extreme environments and those more familiar, Gates is there with the right product, in the right place, at the right time. Whether building original equipment or maintaining products in the aftermarket, they enable their customers to be more efficient, productive, and profitable. Gates proudly brings quality, reliability, and performance to their OE-equivalent aftermark....

Check Stock

Neiko 20687A Ball Joint Separator Tie Rod End Remover Pickle Fork Set | 5 Piece | Automotive Specialty Tool

[APPLICATION]: The ball joint separator is used for separating the ball joint from the spindle support arm on front wheel drive vehicles, both domestic and import..
[QUALITY]: This set comes with a one piece alloy steel construction that ensures durability and strength to withstand the heavy duty hammering force transferred to automotive attachments in your home garage or work..
[DESIGN]: The knurled handle creates a strong, tight, controlled, and well-placed grip when handling the separator on oil and greasy surfaces in automotive work and allows for precision and accuracy in its application..
[DURABLE]: The heat-treated tapered fork smoothly separates ball joints and slips in between the ball and housing, which makes it easy for maintenance tasks and automotive repairs on most car vehicles..
[VERSATILE]: The pickle fork tool in this automotive collection varies and comes in 5 sizes, making it usable for a variety of pitman arms, ball joints, and tie rods of automobiles including cars, trucks, and SUVs..

Check Stock

3M 6386 Tool/Shop Supplies

0.045″ thick, medium density black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner.
Uses automotive OEM approved acrylic foam core and adhesive technology.
Stronger, higher performing, stress handling products than other automotive attachment tapes.
These tapes offer more robust performance to a wide variety of automotive substrates.

Check Stock