ReviewsAutomotive Radiator

J-B Weld FiberWeld 2\ x 36\ Automoitve Repair Cast, Black (38237)

  • FIBERWELD AUTOMOTIVE REPAIR CAST: A high-strength fiberglass wrap, impregnated with a specially-formulated resin for automotive repairs. When activated by water, the product forms a strong, permanent bond that hardens like steel in 15 minutes. Once cured, FiberWeld is temperature resistant up to 400°F and holds water pressure up to 100 PSI..
  • SOAK IT, WRAP IT, DONE: Once the wrap is dipped in water for 5-7 seconds, FiberWeld Automotive Repair Cast has a working time of about 5 minutes and a cure time of 15 minutes! The product achieves full strength in about 2 hours..
  • PRODUCT FEATURES AND STRENGTH: Once fully cured, J-B Weld FiberWeld Automotive Repair Cast has a temperature resistance of 400°F, holds water pressure up to 100 PSI, and can be sanded and painted!.
  • AUTOMOTIVE APPLICATIONS: Radiator & heater hoses, tailpipes & mufflers, oil & transmission lines, vacuum lines, outside mirrors & roof racks, and RV & boat emergency repairs..
  • EVERYTHING YOU NEED: The kit includes a pair of gloves and a 2" x 24" securing bandage!.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Kauplus Radiator and Cap Test Kit Cooling System Pressure Test Kit Radiator and Pressure Cap Test kit Coolant Pressure Tester

  • For testing the leakage in radiator system on a variety domestic/import vehicles.
  • Hand pump and tester head with 12 In. hose and gauge reads pressure in pounds per square inch.
  • 2 popular radiator adapters (32 mm ID cap systems in both the 9.5 mm and the 15 mm depths) and 1 stand cooling cap adapter.
  • Cap has a rotating lever for fine pressure adjustment and safe pressure release.
  • Tests automotive pressurized cooling systems up to 30 PSI.
Check Stock

KCRTEK 170Pcs Automotive Screws and Clips Assortment Kit,9 Size U Clips with Screws foror Dash Door Panel Interior SAE

  • Clip Nuts Automotive are Widely Used on Various Vehicles Dash Door Panel Clamping Projects,for Door Trim,Fender,Bumper,Radiator,Shield yoke,Side Skirt,Grille,Engine Cover ect..
  • The U clips Well Made of Spring Steel with Black Oxide Finish.
  • The Screw is Finished by Zinc Plated.High Quality Material with Heavy-duty Construction for Durability,This Screw Clips Set Would not Break or crack Easily During Use..
  • Automotive Clips Package Includes 4 Popular Screw Size:3*8mm,4*16mm,5*12mm,6*20mm and 5 Common U Clips:3mm,4mm,5mm,6mm,3mm.Total 170pcs assorted in a Compact Plastic Case,It’s Convenient to Carry Out..
  • Easily Use,Each Pastic Case has One Assortment Map,It Will Help us Identify Each Component Conveniently and Each Component was Separated Storeage..
  • What You Get,170Pcs Automotive Clip Nuts.
Check Stock

16 Inch Electric Radiator Cooling Fan 12V Electric Fan Push Pull Slim Mounting Kit

  • 16 inch reversible 12 volt electric cooling fan,Powerful 120 watt motor will keep your engine cool..
  • Blade Size: 16 Inch;Blade Type: Curved;Motor Size: 120 Watts;CFM Rating:1000;RPM Rating: 2250;Amp Draw: 6.6 Amps;Material: Plastic Shroud/Steel Motor..
  • The thermostat kit is a universal fit, which makes it the perfect choice for any automotive vehicle and electric fan..
  • The 3/8" NPT thread-in brass probe with 1/2" NPT adapter are included,Fits For radiators, oil coolers, transmission coolers, condensers and more.
  • Thermostat Kit Universal fit for any automotive vehicle,Activates by grounding electric fans at preset temperature,180'F turn-on temperature, 165'F turn-off temperature,Probe typically threads into radiator, water outlet or manifold..
Check Stock

Stic-Tite Aluminum Radiator Repair

Check Stock

16 Inch Electric Radiator Cooling Fan Mounting Kit & 175-185 Degree Thermostat Relay Switch Kit Black

  • 16 inch reversible 12 volt electric cooling fan,Powerful 120 watt motor will keep your engine cool..
  • Blade Size: 16 Inch;Blade Type: Curved;Motor Size: 120 Watts;CFM Rating:1000;RPM Rating: 2250;Amp Draw: 6.6 Amps;Material: Plastic Shroud/Steel Motor..
  • The thermostat kit is a universal fit, which makes it the perfect choice for any automotive vehicle and electric fan..
  • The 3/8" NPT thread-in brass probe with 1/2" NPT adapter are included,Fits For radiators, oil coolers, transmission coolers, condensers and more.
  • Thermostat Kit Universal fit for any automotive vehicle,Activates by grounding electric fans at preset temperature,180'F turn-on temperature, 165'F turn-off temperature,Probe typically threads into radiator, water outlet or manifold..
Check Stock

CMTOOL Radiator Pressure Tester Kit with Universal Rubber Adapter, Updated Coolant Pressure Tester Kit Coolant Vacuum Refill Kit, Automotive Cooling System Pressure Tester Kit with Carrying Case

  • ...ta clear and easy to read. (0-35psi/0-2.5bar).
  • 【Car Coolant Vacuum Refill Kit with 47.24-inch Transparent Hose】The transparent coolant filling hose is convenient for observing the supply status of the coolant, and the joint is equipped with a brass filter to avoid the inhalation of metal or other impurities. The Automotive cooling system vacuum purge & refill kit can be evacuated within a few minutes to eliminate trapped air..
  • 【Easy-to-Operate Cooling System Pressure Tester】Make sure to start with a full cooling system to properly identify leaks. The thermometer is made of stainless steel and measures the real-time temperature to check whether the temperature is too high. (range: 0-200°C/32-400°F). If the temperature is too high, you need to check whether there is a lack of coolant and whether the thermostat, cooling fan and water pump of the cooling system are faulty..
  • 【Universal Radiator Pressure Tester with Carrying Case】Thanks to the custom molded carrying case of the coolant tester, you can easily organize every item of this device in an orderly manner, ready for your next job. The kit can also be protected during storage. Packing list: coolant system vacuum and refiller, air pressure gauge & air pressure pump, universal rubber adapte....
Check Stock

Master Quick Disconnect Tool Set, 25pc Line Disconnect Tool Kit for A/C Fuel & Transmission Systems, Fuel Line Disconnect Tools for Mechanics Compatible with Ford Chevy GM More, Red

  • COMPLETE REPAIR KIT: Our tool set provides a comprehensive kit for separating standard sizes of automotive AC hoses and fuel lines, suitable for a large variety of domestic vehicles from Ford, Chevy, Dodge, and more.
  • WIDESPREAD APPLICATION: These rugged automotive tools cover almost every type of fuel line, air conditioning line, radiator hose, and heater hose.
Check Stock

Polyvance 5700HT Mini Weld Model 7 Airless Plastic Welder , Red

  • Weld high-melting-point plastics (like nylon radiator tanks) quickly and easily with the 200 watt element.
  • Two different, easy-to-swap welder tips for applying all of the included welding Rod..
  • Includes 8 different types of welding rod that match most of the plastics used in automotive applications..
Check Stock

Orion Motor Tech Master Quick Disconnect Tool Set, 25pc Line Disconnect Tool Kit for A/C Fuel & Transmission Systems, Fuel Line Disconnect Tools for Mechanics Compatible with Ford Chevy GM More, Blue

  • COMPLETE REPAIR KIT: Our tool set provides a comprehensive kit for separating standard sizes of automotive AC hoses and fuel lines, suitable for a large variety of domestic vehicles from Ford, Chevy, Dodge, and more.
  • WIDESPREAD APPLICATION: These rugged automotive tools cover almost every type of fuel line, air conditioning line, radiator hose, and heater hose.
Check Stock

ARES 15027- Cooling System Refill Kit - Easily Test for Leakage in Cooling System - Change Coolant Quickly - Works with Most Radiator and Coolant Bottlenecks

  • Easy to Use: Easily remove the lock nuts on temperature dependent viscosity drive fans.
  • easily hold the water pump pulley in place while loosening the radiator fan.
  • Compatible: Made for but not limited to the following engine models M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B3.
  • Heavy and Durable: Premium high strength steel for this 32mm Automotive Fan Clutch Nut Wrench.
  • If you need to remove the reverse threaded fan,this fan clutch wrench Worked great, made the job of replacing the radiator so much easier..
  • This 2-Piece Fan Clutch Wrench Set is a necessary option if you are going to remove your thermostat or water puimp. Cut my job in more than half the time without it. I recommend that anyone this job needs this tool and the combo set makes it a brainier.
Check Stock