ReviewsAutomotive Replacement Oxygen Sensors

ITEQ 7/8 Inch (22 mm) 6-Point by 1/2 Inch Drive Offset Oxygen Sensor Socket with Wide Side Cutout for Preventing Damage to Wires

  • Perfect tool for removing, inspecting, replacing and installing heated and non-heated oxygen sensors on most vehicles with computer-controlled engines.
  • The 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 1/2” drive and 7/8” ends can be used with both ratchet and torque wrench.
  • The oxygen sensor socket's special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Made of high-quality Chrome vanadium steel for extra strength and durability.
  • Suitable for oxygen sensors found on most modern vehicles.
Check Stock

5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

  • 【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • 【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • 【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • 【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • 【Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

AP1822F 3/8-inch Drive by 7/8-inch 22mm Offset Oxygen Sensor Socket High-performance chrome molybdenum steel construction Wire Gate Accesses Sensor from The Side Preventing Damage to Wires

  • DESIGN: Our socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact....
  • QUALITY:This socket made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures....
  • FUNCTION: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's....
  • FEATURES:Removes and installs oxygen sensors on vehicles with computer-controlled engines,Common 6 point, 7/8 in. (22mm) socket fits most oxygen....
  • LIFETIME WARRANTY - This air door actuator comes complete with a lifetime warranty. If the part ever fails simply contact us for a replacement for....
Check Stock

5 PCS Automotive Oxygen Sensor Socket Wrench Removal Tool and Thread Chaser Set (Blue Case)

  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • Package1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads.
  • USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • Service100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Bapmic 5-Wire Wideband Oxygen Sensor O2 Sensors Upstream for Cadillac Infiniti Nissan CTS QX56 Frontier Forester 250-25005

  • [ REMINDERS ] - Please must read our description and pictures carefully to check details about our sensors, especially the plug, it must be completely....
  • [ PART NUMBER FITS ] - Please check your vehicle's parts Number, It must in our fitment OEM number: 234-9066 250-54022.
  • [ Meet or Exceed OE Standard ] - HiSport oxygen sensors are manufactured under the highest standards, with anti-oxidant coating, durable and resistant....
  • [ 100% TESTED ] - All oxygen sensors are tested by our QA department before the packing. It may cause the test solution remains on the sensor surface,....
  • [ EASY TO INSTALL ] - Direct Plug-In installation, All HiSport oxygen sensors are easy to be replaced in your vehicle, and all parts are pre-installed....
Check Stock

Heated Oxygen Sensor 234-4622 13355 Downstream Sensor 2 for Toyota 4Runner Camry RAV4 Solara Tacoma Avalon Lexus ES300 ES300h ES330 GS300

  • High Quality: A ABIGAIL Oxygen Sensor Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing..
  • Function:Lambda sensor can improve engine efficiency performance and fuel economy, reduce CO2 and other harmful emissions, extend expensive Catalytic Converter life..
  • Interchange Part number: A ABIGAIL Oxygen Sensor is Compatible with Bosch 13355 Denso 234-4622. These sensors will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
  • The metal shroud doesnot look as shiny as other Oxygen Sensors. Because it is made of SUS310 high temperature resistant material. And every single item is heated at 1562. The high temperature also makes it stands wear and tear..
  • One Year Unlimited Warranty. Please use the Year & Make & Model drop down bar and check the wire length & plug & position to confirm the compatibility before placing orders. Please check your part pictures with our pictures, it must be completely same. Or it will not fit your car. It will save your time and cost. If you have any questions or the items you received with problems, contact us directly, we'll provide you with some professional suggestions within 24 hours..
Check Stock

Denso 2344256 OXYGEN SENSOR

  • High Quality: A ABIGAIL Oxygen Sensor Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing..
  • Interchange Part No.: A ABIGAIL Oxygen Sensor is Compatible with Bosch 15284 Denso 234-4668. This sensor will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
  • Function:Lambda sensor can improve engine efficiency performance and fuel economy, reduce CO2 and other harmful emissions, extend expensive Catalytic ..
  • Performance: The metal shroud doesnot look as shiny as other Oxygen Sensors. Because it is made of SUS310 high temperature resistant material. And every single item is heated at 1562℉. The high temperature also mskes it stands wear and tear..
  • One Year Unlimited Warranty. Please use the Year & Make & Model drop down bar and check the wire length & plug & position to confirm the compatibility before placing orders. Please check your part pictures with our pictures, it must be completely same. Or it will not fit your car. It will save your time and cost. If you have any questions or the items you received with problems, contact us directly, we'll provide you with some professional suggestions within 24 hours..
Check Stock

Solder-It Catalytic Converter Cleaner and Deodorizer (16 fl oz) | Fuel System Cleaner | EGR Valve, Combustion Chamber, and Oxygen Sensor Cleaner | Catalytic Cleaner Fuel Additive for Gasoline Engines

  • MAINTAINS CAT CONVERTER: Our Solder-It Catalytic Converter Cleaner and Deodorizer is a fuel additive for automotive engines that supports functional converters by removing build-up in the system.
  • HELPS GET RID OF FOUL SMELL: Get satisfaction from cleaner engine smells. Our catalytic convertor cleaner helps to eliminate offensive rotten egg odors from your engine exhaust..
  • CLEANS OXYGEN SENSORS: Our catalytic cleaner helps as an oxygen sensor cleaner in all functional monolithic and pelletized catalytic converters. This may also extend the time between tune-ups..
  • SUPPORTS EMISSIONS TESTING: Using our fuel system cleaner may help pass emissions control tests. This simple gas treatment promotes carbon cleaner effects that could cut down on emissions..
  • PROMOTES BETTER PERFORMANCE: Promote better fuel efficiency with our potential fuel saver. Good cleaning and maintenance of your cat converter helps you avoid power loss when accelerating..
Check Stock

Denso 234-9009 Oxygen Sensor , Grey

  • Air/Fuel Ratio Sensors Utilize a Sophisticated Sensing Element that Enables Them to Produce a Precise Output in Proportion to the Air/Fuel Ratio.
  • Double Protection Cover Maintains Proper Unit Temperature for Quicker Response Times and Protects the Ceramic Element From Contamination.
  • Denso Oxygen Sensors Feature an Aluminum-Oxide Trap Layer to Protect the Ceramic from Silicone and Lead Poisoning, Preventing Damage to the Platinum Electrod.
  • Stainless Steel Housing Resists Corrosion and Contamination with a Rugged, Watertight Body.
  • Porous PTFE Filter Allows Atmospheric Oxygen the Enter the Sensor without Permitting Water or Engine Contaminants to Seep into the Casing.
  • AFR Sensors Provide the ECU with an Exact AFR Response, Resulting in Better Performance, Lower Emissions, and Increased Gas Mileage..
Check Stock

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

17014 LSU 4.2 Oxygen O2 Sensor Replacement for Audi A4 TT VW Beetle Golf Jetta 5-Wire WideBand O2 Sensor Upstream Sensor 0258007057 0258007090 17014 O2 Sensor

  • Replacement LSU 4.2 Oxygen Sensor || The 5-wire wideband 17014 upstream Sensor 1. It is the 17014 wideband sensor that replacement for Audi A4 A8 TT....
  • Compatible with Audi VW Rolls-Royce || 2001-2006 A4 o2 sensor, 2004-2006 A8 o2 sensor, 2001-2006 TT 02 sensor, 2001-2004 Beetle o2 sensor, 2002-2006....
  • OE/ Replace Number || The upstream sensor replacement for Bosch 17014, 0258007057, 0258007090, 0258007351, 0258007085, 021906262B, 06B906265D,....
  • OEM Design, Direct Fit || The 17014 o2 sensor is direct fit for the factory oem oxygen sensors. Designed to meet / exceed the oem standards. Premium....
  • A 24-month Warranty || A 24-month warranty comes from the sensor 17014. Lower price, better item. Save time, save money. If there's sth for you,....
Check Stock