ReviewsAutomotive Suspension Specialty Tool

VCT 36\ LONG SUPER PRY STEEL METAL BAR PRYING HAND BIG LARGE TOOL

  • The VCT Jumbo Pry Bar Tool – 36” Inch Large Breaker Crowbar with Oversized Mechanics Handle for Heavy-Duty Automotive Prying is what you need to do serious pry work – Do not settle for anything less.
  • Use in an automotive shop to check steering, suspension, brakes, or loose ball joints, bearings, and bushings on vehicles.
  • Use when you need extra leverage, on the farm, or anywhere that involves work on heavy equipment.
  • ANY SPACE, ANY ANGLE: Sharpened, bevel-end angled nose tip creates an extra leverage point and slips into tight spots so you can work in any space and at any angle.
  • BUILT TO LAST: Heavy duty heat-treated chrome-plated long pry bar with 3/5” x 3/5” inch (16mm x 16mm) square shaft.
  • GRIP COMFORTABLY: 8-inch long (20.3cm) mechanic's-style oversized monster handle with comfortable non-slip mixed hard plastic and rubber grip for easy hold with 2 hands.
  • HIGH VISIBILITY: 28-inch (71.1cm) long shaft (36 inches / 91.4cm overall) is constructed from chrome so it shines brightly and will not get lost.
  • You can easily see placement on the vehicle or whatever you are working on.
Check Stock

Dorman 949-250 Air Suspension Spring Compatible with Select Ford / Lincoln / Mercury Models

  • Direct replacement - this air suspension spring is designed to match the fit and function of the original spring on specified vehicle.
  • Restores functionality - reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Powerbuilt Strut Coil Spring Compressor Tool Kit Compress Remove and Install Vehicle Strut and Coil Springs Set for Vehicles Storage Case 648628

  • SPECIALTY TOOL: Coil Spring Compressor removes and installs straight or curved springs made of wire up to 3/4 inch diameter.
  • SAFE: Designed for the safe and efficient removal and installation of most automotive coil spring suspensions.
  • TOUGH: Made to last with Chrome Vanadium Steel arms, precision built to meet or exceed ANSI standards for a lifetime of use.
  • COMES IN: Heavy duty blow molded case to keep kit protected and organized.
  • EASY TO READ: Includes detailed instruction with usage photos.
Check Stock

KIPA Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Tool for Truck Car RV Tire Repair New Top Strong Magnetic Absorb Ingenious Design Practical Circular end Mounting

  • This adjustable gauge allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check....
  • Top Quality: KIPA Wheel Alignment tool is made of solid Alloy, Well-CNC machined, Accurate and durable must-tool for wheel alignment adjustment..
  • Universial Automotive Tool For Wheel Alignment, Easy to use, Save you a lot of cost, You could Do the alignment works at home easily..
  • It has a powerful magnet could be easily mounted on all kinds of metal surface.(Note:Please double check and make sure the panel is balance before....
  • The body of gauge is made of high density aluminum and precision level vial, but the mount is made of metal so that please live it away from water, or....
Check Stock

UNITY AUTOMOTIVE 2-11360-001 Front 2 Wheel Complete Strut Assembly Kit 2000-2005 Buick Lesabre

  • Preassembled Suspension Strut Assembly Including Top Mount, Bearing Plate, Bumper, Insulators and Coil Spring.
  • Restores Your Vehicle Factory Ride Height and Provides a Stable Comfortable Ride.
  • Engineered for a Superior Fit and Trouble-Free Installation.
  • Make It a Hassle Free Repair with All New Components and Eliminate the Need For Specialty Tools.
Check Stock

Unity Automotive 2-11425-11426-001 Front 2 Wheel Complete Strut Assembly Kit 2007-2013 BMW X5

  • Preassembled Suspension Strut Assembly Including Top Mount, Bearing Plate, Bumper, Insulators and Coil Spring.
  • Restores Your Vehicle Factory Ride Height and Provides a Stable Comfortable Ride.
  • Engineered for a Superior Fit and Trouble-Free Installation.
  • Make It a Hassle Free Repair with All New Components and Eliminate the Need For Specialty Tools.
  • NOTE. Product excludes air and electronic suspension..
Check Stock

Dorman 523-267 Front Driver Side Rack and Pinion Bushing Compatible with Select Cadillac / Chevrolet / GMC Models, 2 Pack (OE Fix)

  • Cost-effective repair - this set of rack and pinion mount bushings allows direct replacement of failed bushings.
  • Application specific - made to directly replace suspension steering rack bushings on certain Cadillac, Chevy and GMC vehicles.
  • Hardware included - comes with bracket for complete installation.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

ABN Jumbo Pry Bar Tool – 36in Large Breaker Crowbar with Oversized Mechanics Handle for Heavy-Duty Automotive Prying

  • PRY AWAY: The ABN Jumbo Pry Bar Tool – 36” Inch Large Breaker Crowbar with Oversized Mechanics Handle for Heavy-Duty Automotive Prying is what you need to do serious pry work – Do not settle for anything less.
  • Use in an automotive shop to check steering, suspension, brakes, or loose ball joints, bearings, and bushings on vehicles.
  • Use when you need extra leverage, on the farm, or anywhere that involves work on heavy equipment.
  • ANY SPACE, ANY ANGLE: Sharpened, bevel-end angled nose tip creates an extra leverage point and slips into tight spots so you can work in any space and at any angle.
  • BUILT TO LAST: Heavy duty heat-treated chrome-plated long pry bar with 3/5” x 3/5” inch (16mm x 16mm) square shaft.
  • GRIP COMFORTABLY: 8-inch long (20.3cm) mechanic's-style oversized monster handle with comfortable non-slip mixed hard plastic and rubber grip for easy hold with 2 hands.
  • HIGH VISIBILITY: 28-inch (71.1cm) long shaft (36 inches / 91.4cm overall) is constructed from chrome so it shines brightly and will not get lost.
  • You can easily see placement on the vehicle or whatever you are working on.
Check Stock

ABN Extra Large Ball Joint Press Kit Wheel Bearing Press Kit - Universal Ball Joint Separator Tool and Removal Adapters

  • Ball joint kit will endure years of heavy use.
  • [Contents]: 11.5-inch (29.2cm) tall extra large ball joint press tool C-frame has 2 interchangeable pressure screws and a 3.5-inch (8.9cm) pressure screw head adapter.
  • Two 3-inch (7.6cm) wide stepped automotive press adapters fit the 10 and 6.5-inch (25.4 and 16.5cm) pressure screws.
  • [Convenient Storage]: 14.5 by 10.3-inch (36.8 x 26.2cm) plastic blow-molded carrying case provides safe storage, quick organization, and easy transportation.
  • Compartment for each ball press kit piece.
Check Stock

SCITOO Fit Cars LCV and HGV Engines Universal Press and Pull Sleeve Kit Removal Installation Bushes Bearings Tool Kit

  • Compatible Vehicles : Applicable to many cars and LCV ,HGV Engines.
  • Package: 20 x Press Sleeves, Inside Diameter from 34-72mm in 2mm steps, Outside Diameter from 44-82mm in 2mm steps, 4 x Pulling Spindles with nuts and....
  • Product Usage: For Removal and Installation of Bearings, Bushes, Seals and cut down the possibility of damaging the bearing or suspension housings.
  • Benefit : Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this tool set a long lasting....
  • Important Note: When doing automotive maintenance always make sure all the tools are correctly used and wear glasses and gloves . Any question or....
Check Stock

Genuine GM 9597801 Hub Cap

  • Genuine Oem: Yes, Manufacturer Part Number: 9597801, Category 3: Covers & Trim, Part Ref# On Diagram: ONLY PART REFERENCE #1 ON THE DIAGRAM IS.
  • Warranty: 1 Year, Category 2: Wheels, Alternate Item Name: Suspension Strut Mount Tool, Quantity Needed: 1.
  • Brand: GM, Fitment Type: Direct Replacement, Item Name: Suspension Strut Mount Tool, Category 1: Front Suspension.
Check Stock